Instrukcja obsługi Danby DFF261WDB

Danby lodówka DFF261WDB

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Danby DFF261WDB (20 stron) w kategorii lodówka. Ta instrukcja była pomocna dla 10 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/20
Owner’s Use and Care Guide
Guide d’utilisation et soin de Propriètaire
Manual de Instructions pare el Uso y el
Cuidado de su Unidad
Model • Modèle • Modelo
DFF261BSLDB, DFF261WDB
ALL REFRIGERATOR
Owner’s Use and Care Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6
• Important Safety Information
• Installation Instructions
• Features
• Operating Instructions
• Care and Maintenance
• Troubleshooting
• Warranty
TOUT RÉFRIGÉRATEUR
Guide d’utilisation et soin de Propriètaire . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-12
• Consignes de Sécurité Important
• Instructions d’installation
• Caractéristiques
• Consignes d’operation
• Soins et entretien
• Dépannage
• Garantie
TODA REFRIGERADORA
Manual de Instructions pare el Uso y el Cuidado de su Unidad . . . . . . . . . . . . . . . . 13 - 19
• Instrucciones de Seguridad Importantes
• Instalación
• Caracteristicas
• Operación
• Cuidado y Mantenimiento
• Solución Sugerida
• Garantia
Danby Products Limited, Ontario, Canada N1H 6Z9
Danby Products Inc., Findlay, Ohio, USA 45840
V.2.09.09 JF
CAUTION:
Read and follow all safety rules and operating
instructions before first use of this product.
PRECAUTION:
Veuillez lire attentivement les consignes de sécurité et
les instructions d’utilisation avant l’utilisation initiale de
ce produit.
PRECACION:
Lea y observe todas las reglas de seguridad y las
instrucciones de operación antes de usar este producto
por primera vez.
R
?
IMPORTANT SAFETY INFORMATION
1
ELECTRICAL
REQUIREMENTS This appliance must be grounded. In the event of an electrical short circuit, grounding
reduces the risk of electrical shock by providing an escape wire for the electrical current.
This appliance is equipped with a cord having a
grounding wire with a grounding plug. The plug
must be plugged into an outlet that is properly
installed and grounded.
IMPORTANT WARNING
An empty refrigerator can pose a threat to children.
To render the unit harmless we strongly recommend
removing the door prior to disposal.
WARNING - Improper use of the grounding plug can
result in a risk of electric shock. Consult a qualified
electrician or serviceman if the grounding instructions
are not completely understood, or if doubt exists as to
whether the appliance is properly grounded.
DO NOT USE AN EXTENSION CORD
Use an exclusive wall outlet. Do not connect your
refrigerator to extension cords or together with any
other appliance in the same wall outlet.
Remove exterior and interior packings, wipe the
outside thoroughly with a soft dry cloth and the
inside with a wet, lukewarm cloth. Avoid placing the
unit in a narrow recess or near any heat source, direct
sunlight, or moisture. Let air circulate freely around
the unit. Keep the rear of the refrigerator 5 inches
away from the wall.
Location
1) Select a place with a strong, level floor.
2) Allow 5 inches of space between the back of the
refrigerator and any adjacent wall.
3) Avoid direct sunlight and heat. Direct sunlight
may affect the acrylic coating. Heat sources
nearby will cause higher electricity consumption.
The refrigerating system in this refrigerator is a
“Frost Free” system. This type of system requires no
user intervention (i.e. defrosting) other than selecting
required cooling temperatures and the usual care and
maintenance.
To avoid vibration, the unit must be set level. This is
accomplished by adjusting the front leveling leg,
located under the refrigerator.
NOTES:
• This appliance is intended for FREE-STANDING
INSTALLATION ONLY, and is NOT intended to
be built-in.
• Before connecting this appliance to electrical
power supply, leave it to stand for approx. 24
hours, which will reduce the possibility of
malfunction in the cooling system due to transport
handling.
• This appliance is approved for INDOOR USE
ONLY and is NOT intended for outdoor operation.
IMPORTANT:
AMBIENT TEMPERATURES BELOW 50º F (10º
C) WILL AFFECT THE OPERATION OF YOUR
REFRIGERATOR. WHEN THE UNIT IS PLACED
IN AN AREA WHERE THE TEMPERATURE
DROPS LOWER THAN 50º F (10º C), SET THE
TEMPERATURE CONTROL SELECTORS TO
“MAX” IN BOTH THE REFRIGERATOR AND
FREEZER SECTIONS.
NOTE:
IF THE UNIT IS UNPLUGGED, HAS LOST
POWER, OR IS TURNED OFF, YOU MUST WAIT
3 TO 5 MINUTES BEFORE RESTARTING THE
UNIT. IF YOU ATTEMPT TO RESTART BEFORE
THIS TIME DELAY, THE REFRIGERATOR-
FREEZER WILL NOT START.
INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS (cont’d)
2
DOOR REVERSAL
INSTRUCTIONS
Fig. 1
Fig. 2
Fig. 3
To avoid personal injury to yourself and/or property, we
recommend someone assists you during the door reversal
process.
1) To access the lower hinge assembly, tilt back the
refrigerator or lay the refrigerator on its back (Fig. 1).
2) Remove both leveling legs located at the front of the unit.
3) Remove the screws holding the lower hinge assembly to
the refrigerator (Fig. 1).
4) Remove the main door assembly from the unit (open door
and pull down).
5) Remove the screws from the middle hinge assembly.
Then remove the hinge and refrigerator door (open door
and pull down) (Fig. 2).
6) Loosen top hinge screws. Remove top hinge from current
position and install with holes on other side of door. (Fig 3)
7) Remove the door plug and door bushing located on the top
and bottom of each door assembly (Fig. 2).
8) Interchange positions (ie. door plug right side, door
bushing left side).
9) Re-install refrigerator door assembly on unit.
10) Re-install the middle hinge assembly on the opposite side.
11) Make sure the door assembly is properly aligned on the
unit before tightening the hinge screws.
12) Re-install the main door assembly on the unit.
13) Re-install the lower hinge assembly on the opposite side,
making sure to change the bushing and screw on the
opposite sides on the bottom of the unit.
14) Make sure the door assembly is properly aligned on the
unit before tightening lower hinge screws.
15) Re-install both leveling legs.
THE PROCESS IS NOW COMPLETE.

Specyfikacje produktu

Marka: Danby
Kategoria: lodówka
Model: DFF261WDB

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Danby DFF261WDB, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje lodówka Danby

Danby

Danby SPRAR055D1SS Instrukcja

8 Października 2024
Danby

Danby DFF116B2SSDBL Instrukcja

5 Października 2024
Danby

Danby DAR044A1SSO-6 Instrukcja

3 Października 2024
Danby

Danby DAR032B1SLM Instrukcja

29 Września 2024
Danby

Danby DCR045B1BDB-3 Instrukcja

26 Września 2024
Danby

Danby DCRM71BLDB Instrukcja

23 Września 2024
Danby

Danby DAR033A1BSLDBO Instrukcja

22 Września 2024
Danby

Danby DAR033A6MDB Instrukcja

20 Września 2024
Danby

Danby DFF142E1WDB Instrukcja

17 Września 2024
Danby

Danby Designer DCR032A2BSLDD Instrukcja

16 Września 2024

Instrukcje lodówka

Najnowsze instrukcje dla lodówka

Hotpoint

Hotpoint HAC20 T323 Instrukcja

11 Grudnia 2024
Hotpoint

Hotpoint HAT70I 932 S DC Instrukcja

11 Grudnia 2024
Goddess

Goddess RSC084GW8SS Instrukcja

11 Grudnia 2024
SVAN

SVAN SR85501EC Instrukcja

11 Grudnia 2024
Cecotec

Cecotec Bolero CoolMarket Combi 117 DF Instrukcja

11 Grudnia 2024
Cecotec

Cecotec Bolero CoolMarket Combi 205 Instrukcja

11 Grudnia 2024
Midea

Midea MDRS710FIE Instrukcja

11 Grudnia 2024
Exquisit

Exquisit KB60-V-091E Instrukcja

10 Grudnia 2024
Café

Café CJE23DP3WD1 Instrukcja

10 Grudnia 2024
Café

Café CJE23DP4WW2 Instrukcja

10 Grudnia 2024