Instrukcja obsługi Daikin EWYQ009ACV3

Daikin Niesklasyfikowane EWYQ009ACV3

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Daikin EWYQ009ACV3 (16 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/16
OPERATION MANUAL
EWAQ009ACV3
EWAQ010ACV3
EWAQ011ACV3
EWYQ009ACV3
EWYQ010ACV3
EWYQ011ACV3
EWAQ009ACW1
EWAQ011ACW1
EWAQ013ACW1
EWYQ009ACW1
EWYQ011ACW1
EWYQ013ACW1
Packaged air-cooled water chillers and
packaged reversible air to water heatpumps
Operation manual
1
EWAQ+EWYQ009~011ACV3 + EWAQ+EWYQ009~013ACW1
Packaged air-cooled water chillers and packaged reversible air to
water heatpumps
4PW51588-1
CONTENTS Page
Introduction ..................................................................................... 1
This manual ............................................................................................... 1
This unit ..................................................................................................... 1
Options .................................................................................................. 1
Connection to a benefit kWh rate power supply.................................... 1
Operating the unit ........................................................................... 2
Operating the digital controller .......................................................... 2
Features and functions .............................................................................. 2
Basic controller functions ...................................................................... 2
Clock function........................................................................................ 2
Schedule timer function......................................................................... 2
Name and function of buttons and icons ................................................... 2
Setting up the controller............................................................................. 3
Setting the clock .................................................................................... 3
Setting the schedule timer..................................................................... 3
Description of the operation modes........................................................... 4
Heating operation (h) ........................................................................... 4
Cooling operation (c)............................................................................ 4
Quiet mode operation (s).................................................................... 4
Controller operations ................................................................................. 4
Manual operation................................................................................... 4
Schedule timer operation ...................................................................... 5
Programming and consulting the schedule timer....................................... 6
Getting started....................................................................................... 6
Programming......................................................................................... 6
Consulting programmed actions............................................................ 8
Tips and tricks ....................................................................................... 8
Operating the remote alarm option ................................................... 9
Field settings ..................................................................................... 9
Procedure .................................................................................................. 9
Detailed description ................................................................................... 9
Field settings table................................................................................... 12
Maintenance .................................................................................. 13
Important information regarding the refrigerant used .............................. 13
Maintenance activities ............................................................................. 13
Standstill .................................................................................................. 13
Troubleshooting ............................................................................ 13
Disposal requirements ................................................................. 13
The English text is the original instruction. Other languages are
translations of the original instructions.
This appliance is not intended for use by persons, including children,
with reduced physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a person
responsible for their safety.
Children should be supervised to ensure that they do not play with
the appliance.
INTRODUCTION
Thank you for purchasing this Daikin inverter chiller.
THIS MANUAL
This manual describes how to start up and switch off the unit, set
parameters and configure the schedule timer by means of the
controller, maintain the unit and solve operational problems.
THIS UNIT
This unit is designed for outdoor installation and used for both
heating and cooling applications. The unit is designed to be
combined with fan coil units or air handling units for air conditioning
purposes.
Heat pump and cooling only versions
This chiller range consists of 2 main versions: a heat pump (EWYQ)
version and a cooling only (EWAQ) version, available in 6 standard
sizes:
■V3: 9, 10, and 11 kW (single phase)
■W1: 9, 11, and 13 kW (3 phase)
Options
■Remote alarm kit EKRP1HB
■Heater tape option OP10
Both versions are also available with a heater tape option
(OP10) for protecting internal water pipework at cold outdoor
temperatures.
To obtain more information concerning these option kits, please refer
to dedicated installation manuals of the kits.
Connection to a benefit kWh rate power supply
This equipment allows for connection to benefit kWh rate power
supply delivery systems which do not interrupt the power supply.
Refer to chapter "Connection to a benefit kWh rate power supply" in
the installation manual for more details.
EWAQ009~011ACV3
EWAQ009~013ACW1
EWYQ009~011ACV3
EWYQ009~013ACW1
Packaged air-cooled water chillers and
packaged reversible air to water heatpumps Operation manual
READ THIS MANUAL ATTENTIVELY BEFORE STARTING
UP THE UNIT. DO NOT THROW IT AWAY. KEEP IT IN
YOUR FILES FOR FUTURE REFERENCE.
Before operating the unit, make sure the installation has
been carried out correctly by a professional Daikin dealer.
If you feel unsure about operation, contact your Daikin
dealer for advice and information.
For "Checks before initial start-up" and "Initial start-up"
procedures refer to the installation manual of this unit.
EWAQ+EWYQ009~011ACV3 + EWAQ+EWYQ009~013ACW1
Packaged air-cooled water chillers and packaged reversible air to
water heatpumps
4PW51588-1
Operation manual
2
OPERATING THE
UNIT
OPERATING THE DIGITAL CONTROLLER
Operating the unit comes down to operating the digital controller.
Features and functions
The digital controller is a state of the art controller that offers full
control over your installation. It can control a cooling/heating and a
cooling only installation.
Both installations are available in multiple versions which vary in
capacity.
Basic controller functions
The basic controller functions are:
■Turning the unit ON/OFF.
■Operation mode change-over:
- heating (refer to "Heating operation (
h)" on page 4),
- cooling (refer to "Cooling operation (
c)" on page 4),
- quiet mode (refer to "Quiet mode operation (s)" on page 4),
■Selection of features:
- quiet mode (refer to "Quiet mode operation (s)" on page 4),
- weather dependent control (refer to "Selecting weather
dependent set point operation (heat pump models only)" on
page 4).
■Temperature set point adjustment (refer to "Controller
operations" on page 4).
The digital controller supports a power cut off of maximum 2 hours.
When autorestart is enabled (see "Field settings" on page 9) this
allows a power supply shut down of 2 hours without user intervention
(e.g. benefit kWh rate power supply).
Clock function
The clock functions are:
■24 hour real time clock.
■Day of the week indicator.
Schedule timer function
The schedule timer function allows the user to schedule the
operation of the installation according to a daily or a weekly program.
Name and function of buttons and icons
1. COOLING/HEATING ON/OFF BUTTON y
The ON/OFF button starts or stops the heating or cooling
function of the unit.
When the unit is connected with an external room thermostat,
this button is not operable and the icon
e is shown.
Pressing the ON/OFF button consecutively too many times may
cause malfunction of the system (maximum 20 times per hour).
2. OPERATION LED 0
The operation LED is lit during cooling or heating operation. The
LED blinks if a malfunction occurs. When the LED is OFF,
cooling or heating are inactive.
3. OPERATION MODE ICONS hcs
These icons indicate the current operation mode(s): heating (h),
cooling (c) or quiet mode (s). Quiet mode is a feature of the
cooling or heating operation mode. When quiet mode is
activated, the quiet mode icon and the heating or cooling mode
icon will be displayed simultaneously.
In a heating only installation, the c icon will never be displayed.
In a cooling only installation, the h icon will never be displayed.
4. EXTERNAL CONTROL ICON e
This icon indicates that an external room thermostat with higher
priority is controlling your installation. This external room
thermostat can start and stop the heating/cooling operation and
change the operation mode (cooling/heating).
When an external room thermostat with a higher priority is
connected, the schedule timer for cooling and heating will not
function.
5. DAY OF THE WEEK INDICATOR 1234567
This indicator shows the current weekday.
When reading or programming the schedule timer, the indicator
shows the set day.
6. CLOCK DISPLAY 8
The clock display shows the current time.
When reading or programming the schedule timer, the clock
display shows the action time.
7. SCHEDULE TIMER ICON p
This icon indicates that the schedule timer is enabled.
8. ACTION ICONS q
These icons indicate the programming actions for each day of
the schedule timer.
9. OFF ICON x
This icon indicates that the OFF action is selected when
programming the schedule timer.
Never let the digital controller get wet. This may cause an
electric shock or fire.
Never press the buttons of the digital controller with a hard,
pointed object. This may damage the digital controller.
Never inspect or service the digital controller yourself, ask
a qualified service person to do this.
NOTE ■Descriptions in this manual that apply to a specific
installation or that depend on the installed
equipment, are marked with an asterisk (*).
■Some functions described in this manual may not
be available or should not be available. Ask your
installer or your local dealer for more information
on permission levels.
11735 6 248
13
25
26
11
19
21
14
4
7
9
12
10
22
34
27
28
23 20
33
32
31
29
30
2161815

Specyfikacje produktu

Marka: Daikin
Kategoria: Niesklasyfikowane
Model: EWYQ009ACV3

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Daikin EWYQ009ACV3, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Niesklasyfikowane Daikin

Daikin

Daikin RXA20A5V1B Instrukcja

9 Października 2024
Daikin

Daikin FXAQ50PVE Instrukcja

9 Października 2024
Daikin

Daikin RXA35A5V1B Instrukcja

9 Października 2024
Daikin

Daikin FXMQ140PAVE Instrukcja

9 Października 2024
Daikin

Daikin RXB20C2V1B Instrukcja

9 Października 2024
Daikin

Daikin RXB35C2V1B Instrukcja

9 Października 2024
Daikin

Daikin RBLQ-C2V3 Instrukcja

9 Października 2024
Daikin

Daikin FXDQ40A2VEB Instrukcja

9 Października 2024
Daikin

Daikin ETBX16DF9W Instrukcja

9 Października 2024
Daikin

Daikin FXDQ63P3VE Instrukcja

9 Października 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

Black Diamond

Black Diamond BD1121530000ALL1 Instrukcja

15 Października 2024
Husqvarna

Husqvarna K 970 SmartGuard Instrukcja

15 Października 2024
Stihl

Stihl HT 70 Instrukcja

15 Października 2024
Ernesto

Ernesto H14270 Instrukcja

15 Października 2024
Uniden

Uniden BT MIC KIT Instrukcja

15 Października 2024
Vaude

Vaude Omnis Bike 26 Instrukcja

15 Października 2024
ART

ART ProChannel II Instrukcja

15 Października 2024
Aukey

Aukey DR02J Instrukcja

15 Października 2024
Master Lock

Master Lock 653EURD Instrukcja

15 Października 2024
Roland

Roland FR-18 Diatonic Instrukcja

15 Października 2024