Instrukcja obsługi Dahua Technology HAC-B1A51

Dahua Technology Kamera monitorująca HAC-B1A51

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Dahua Technology HAC-B1A51 (38 stron) w kategorii Kamera monitorująca. Ta instrukcja była pomocna dla 8 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/38

HDCVI Camera

User’s Manual

V1.0.

Foreword

General

This manual introduces the functions and operations of the HDCVI camera (hereinafter referred to as

"the device"). Read carefully before using the device, and keep the manual safe for future reference.

Safety Instructions

The following categorized signal words with defined meaning might appear in the manual.

Signal Words Meaning

DANGER

Indicates a high potential hazard which, if not avoided, will result in

death or serious injury.

WARNING

Indicates a medium or low potential hazard which, if not avoided,

could result in slight or moderate injury.

CAUTION

Indicates a potential risk which, if not avoided, could result in

property damage, data loss, reductions in performance, or

unpredictable results.

TIPS Provides methods to help you solve a problem or save time.

NOTE Provides additional information as a supplement to the text.

Revision History

Version Revision Content Release Time

V1.0.2

Added "5 Smart Dual Illuminators Cameras 

Configuration".

Added "7 .4 Configuring Smart Dual 

Illuminators Active Deterrence Camera".

August 2022

V1.0.1 Adjusted the format of tables. 

Added Cybersecurity Recommendations. 

August 2021

V1.0.0 rFirst elease. June 2020

Privacy Protection Notice

As the device user or data controller, you might collect the personal data of others such as their face,

fingerprints, and license plate number. You need to be in compliance with your local privacy

protection laws and regulations to protect the legitimate rights and interests of other people by

implementing measures which include but are not limited: Providing clear and visible identification

to inform people of the existence of the surveillance area and provide required contact information.

About the Manual

 The manual is for reference only. Slight differences might be found between the manual and the

product.

 We are not liable for losses incurred due to operating the product in ways that are not in

compliance with the manual.

 The manual will be updated according to the latest laws and regulations of related jurisdictions.

For detailed information, see the paper user’s manual, use our CD-ROM, scan the QR code or

visit our official website. The manual is for reference only. Slight differences might be found

between the electronic version and the paper version.

 All designs and software are subject to change without prior written notice. Product updates

might result in some differences appearing between the actual product and the manual. Please

contact customer service for the latest program and supplementary documentation.

 There might be errors in the print or deviations in the description of the functions, operations

and technical data. If there is any doubt or dispute, we reserve the right of final explanation.

 Upgrade the reader software or try other mainstream reader software if the manual (in PDF

format) cannot be opened.

 All trademarks, registered trademarks and company names in the manual are properties of their

respective owners.

 Please visit our website, contact the supplier or customer service if any problems occur while

using the device.

 If there is any uncertainty or controversy, we reserve the right of final explanation.

III

Important Safeguards and Warnings

Electrical Safety

 All installation and operation should conform to your local electrical safety codes.

 The power supply must conform to the requirements of ES1 in IEC 62368-1 standard and be no

higher than PS2. Note that the power supply requirements are subject to the device label.

 A readily accessible disconnect device shall be incorporated in the building installation wiring.

 Make sure that the power adapter meets the operating voltage requirement before device

powering up the device (The material and length of the power cable might influence the device

voltage).

 Prevent the power cable from being trampled or pressed, especially the plug, power socket and

the junction extruded from the device.

 We assume no liability or responsibility for all the fires or electrical shock caused by improper

handling or installation.

Operating Requirements

 Do not aim the device at strong light to focus, such as lamp light and sun light.

 Transport, use and store the device within the range of allowed humidity and temperature.

 Keep the device away from water or other liquid to avoid damages to the internal components.

 Keep sound ventilation to avoid heat accumulation.

 Heavy stress, violent vibration or water splash are not allowed during transportation, storage

and installation.

 Pack the device with standard factory packaging or the equivalent material when transporting

the device.

 You are recommended to use the device together with lightning arrester to improve lightning

protection effect.

 You are recommended to ground the device to enhance reliability.

 You are recommended to use qualified video transmission cable to improve video quality, and

use RG59 coaxial cable or higher standard.

WARNING

 Use standard components or accessories provided by the manufacturer and make sure that the

device is installed and maintained by professional engineers.

 The surface of the image sensor should not be exposed to laser beam radiation in an

environment where a laser beam device is used.

 Do not provide two or more power supply sources for the device; otherwise it might damage

the device.

 If PoC power supply is used, do not connect any other device between the device and PoC

transceiver including UTC, Balun, optical transceiver, distributor and convertor and so on;

otherwise, the device might get burned.

 PoC supply voltage is up to 52V. Do not dismantle the device during normal operation;

otherwise it might cause danger to both device and users due to high voltage.

Table of Contents

Foreword I.....................................................................................................................................................

Important Safeguards and Warnings ........................................................................................................ III

1 Overview ....................................................................................................................................................1

Introduction................................................................................................................................................. 1 1.1

Application ................................................................................................................................................... 1 1.2

Transmission Distance .................................................................................................................................. 2 1.3

2 Cable Connection ........................................................................................................................................3

Power Output 3 ..............................................................................................................................................2.1

12 VDC Power Input Port ............................................................................................................................. 3 2.2

24 VAC Power Input Port 3 .............................................................................................................................2.3

Video Output Port ........................................................................................................................................ 4 2.4

Audio Input Port 4 ..........................................................................................................................................2.5

Alarm Output Port ....................................................................................................................................... 4 2.6

DIP Switch .................................................................................................................................................... 5 2.7

HD/SD Switch Control Cable ........................................................................................................................ 5 2.8

HDCVI Aviation Connector ........................................................................................................................... 5 2.9

3 General Configuration and Operation ..........................................................................................................7

Entering XVR Main Menu ............................................................................................................................. 7 3.1

Setting Audio Input ...................................................................................................................................... 7 3.2

Operating PTZ Control Panel ........................................................................................................................ 8 3.3

3.3.1 Operating OSD Menu ....................................................................................................................... 8

3.3.2 Operating Auto Focus (AF) ............................................................................................................. 10

4 Full-Color Camera Configuration ................................................................................................................ 11

Enabling/Disabling Smart Light .................................................................................................................. 11 4.1

Configuring Smart Light Adjustment.......................................................................................................... 11 4.2

5 Smart Dual Illuminators Cameras Configuration ......................................................................................... 12

6 Temperature and Humidity Camera Configuration ...................................................................................... 14

Enabling/Disabling Temperature and Humidity ......................................................................................... 14 6.1

Configuring Temperature Monitoring Mode ............................................................................................. 14 6.2

Adjusting Temperature and Humidity Display ........................................................................................... 14 6.3

Viewing Temperature and Humidity .......................................................................................................... 15 6.4

7 Active Deterrence Camera Configuration ................................................................................................... 16

Detection Range of PIR Detector ............................................................................................................... 16 7.1

Configuring Trigger Mode .......................................................................................................................... 16 7.2

Configuring Light Warning and Audio Alarm ............................................................................................. 17 7.3

Configuring Smart Dual Illuminators Active Deterrence Camera .............................................................. 17 7.4

8 Gateway Camera Configuration ................................................................................................................. 20

Connecting Node Devices on OSD menu................................................................................................... 20 8.1

Connecting Node Devices on XVR.............................................................................................................. 20 8.2

9 Box Camera Installation ............................................................................................................................22

Lens Installation ......................................................................................................................................... 22 9.1

9.1.1 Installing Lens Type 1 ..................................................................................................................... 22

9.1.2 Installing Lens Type 2 ..................................................................................................................... 23

I/O Port Installation ................................................................................................................................... 24 9.2

9.2.1 Connecting Cable ........................................................................................................................... 24

9.2.2 Removing Cable ............................................................................................................................. 24

Device Installation ...................................................................................................................................... 24 9.3

10 Fisheye Camera Configuration ................................................................................................................. 26

Fisheye Dewarp on the Live Interface ...................................................................................................... 26 10.1

Fisheye Dewarp During Playback ............................................................................................................. 27 10.2

11 FAQ ........................................................................................................................................................28

PoC Power Supply .................................................................................................................................... 28 11.1

Long Distance Power Supply .................................................................................................................... 28 11.2

Centralized Power Supply ........................................................................................................................ 28 11.3

Connector Waterproof Protection ........................................................................................................... 29 11.4

Maintenance ............................................................................................................................................... 31

Appendix 1 Cybersecurity Recommendations ............................................................................................... 32

1 Overview

Introduction 1.1

The devices comply with the HDCVI standard and support the transmission of video and control

signal over coaxial cable. The devices produce video signal with megapixel resolution and require

connected XVRs -to achieve high speed, long-distance, and zero-lag transmission of the signal. They

are applicable to various scenes, such as roads, warehouses, underground parking lots, bars,

pipelines s. , and gas station

Application 1.2

Application scenario Figure 1-1

Table 1-1 a Description of the pplication

No. No. No. Name Name Name

1 8 (Optional) Lens Display Screen 15 Splicer

2 HDCVI Products 9 Direct Connection 16 Convertor

3 (Optional) Surge

Protection Device 10 Integrated Video

Platform 17 Ethernet

4 (Optional) Optical

Transceiver (Send) 11 18 Matrix Splicing

Screen

5 (Optional) Optical

Transceiver (Receive) 12 19 Matrix Display

Screen

6 (Optional) Distributor — — 13 Switch

7 — — HCVR Products 14 Splicing Screen

Transmission Distance 1.3

Table 1-2 Transmission distance

Cable 720P 1080P 4MP/4K

Coaxial Cable RG6 (75 1200 m 800 m 700 m-5)

RG59 (75-3) 800 m 500 m 500 m

UTP CAT6 450 m 300 m 300 m

Table 1-3 Transmission distance of PoC HDCVI powered by PoC XVR

Po Po C XVR Series C Mode RG59 RG6

Full series AT m m 100 100

AF m m 200 200

2 Cable Connection

Cable types might vary with different cameras, and the actual product shall prevail.

Power Output 2.1

Supplies 12 VDC power.

 Ensure that power consumption of devices connected to this port is below 2 W.

 Ensure that supply frequency of devices connected to this port is higher than 1 MHz, such as

sound pick-up, temperature/humidity sensor and other devices without power consumption

change. It might cause image flickering if this port is connected to devices with supply

frequency less than 1 hMHz, such as fan, all sensor, loudspeaker, motor and other

electromechanical devices with power consumption change.

Power output Figure 2-1

12 V DC Power Input Port2.2

Inputs V12 DC power.

Device abnormity or damage could occur if power is not supplied correctly for 12 VDC power input

port. Be sure to supply power as instructed in the manual.

12 VDC power input port Figure 2-2

24 VAC Power Input Port 2.3

Inputs 24 VAC power.

Device abnormity or damage could occur if power is not supplied correctly. Please be sure to supply

power as instructed in the manual.

24 VAC power input port Figure 2-3

Video Output Port 2.4

Connects to the XVR to output video signal.

WARNING

 When the device is in the condition of PoC power supply, do not connect any other device

between the device and PoC XVR or PoC transceiver including UTC, Balun, optical transceiver,

distributor and convertor and so on; otherwise, the device might get burned.

 PoC power supply is with high voltage. Do not dismantle the device during normal operation;

otherwise it might cause danger to both device and users due to high voltage.

Video output port Figure 2-4

Audio Input Port 2.5

Connects to sound pickup devices to receive analog audio signal.

Audio input port Figure 2-5

Alarm Output Port 2.6

Connects to external alarm devices such as siren to trigger alarms.

Alarm output port Figure 2-6

DIP Switch 2.7

Dial switches to change output mode. Switch up indicates "ON", and switch down indicates "OFF."

DIP switch Figure 2-7

Table 2-1 Operations of DIP switch

Switch1 Switch2 Output Mode

OFF OFF CVI

ON ON CVBS

ON OFF AHD

OFF ON TVI

HD/SD Switch Control Cable 2.8

When the HD/SD switch control cable forms a short circuit, video output mode switches from HD to

SD. On the contrary, it will switch back to HD video output when the cable forms an open circuit.

HD/SD switch control cable Figure 2-8

The HD/SD switch control cable is available on select models.

HDCVI Aviation Connector 2.9

Aviation c or onnect could strengthen the connection of mobile devices and provide four rpo ts for

your convenience.

HDCVI aviation connector Figure 2-9

3 General Configuration and Operation

Power up the device and connect it to the live the XVR with coaxial cable, and then interface is

displayed. Then you can start configuring HDCVI cameras on the XVR.

 The No. of the coaxial port will display at the lowers on XVR -left corner of each window to

indicate the corresponding camera.

 Ports might vary depending on the XVR models, and the actual product shall prevail.

Entering XVR Main Menu 3.1

Right-click on the live interface, and the shortcut menu is displayed. Step 1

Click Main Menu and then log in to the system. The m main enu of XVR is displayed.Step 2

XVR main menu Figure 3-1

Setting Audio Input 3.2

Audio input is available on select models.

On . the Main Menu interface, select CAMERA > ENCODE > EncodeStep 1

On the Channel l -drop down list, select the device that you want to configure according to Step 2

the coaxial port No.

Under Main Stream, click More Setting. Step 3

Encode setting Figure 3-2

On the More Setting interface, enable Audio Encode function and then configure the Step 4

audio settings. In the Audio Format list, leave it as default; in the list, selectAudio Source

HDCVI.

Click Save. Step 5

More setting Figure 3-3

On , . the Encode interface click ApplyStep 6

Operating PTZ Control Panel 3.3

3.3.1 Operating OSD Menu

 The OSD menus of different cameras might vary, and the actual product shall prevail.

 When you use OSD menu to restore the device to default settings, the resolution, mode, frame

rate and language of the device will not be restored.

On - t the live interface, right click he device that you want to configure. The shortcut menu is Step 1

displayed.

Shortcut menu Figure 3-4

Click PTZ and click to extend the menu. Step 2

PTZ setting options Figure 3-5

Click . The MENU OPERATION panel is displayed. Step 3

Menu Operation panel Figure 3-6

4 Color Camera Full- Configuration

This chapter introduces how to configure the working modes of smart light, including auto and

manual. l Smart ight thewill change brightness of white light automatically according to the ambient

lighting condition to avoid over- . - exposure Smart light is only available for full color camera.

Enabling/Disabling Smart Light 4.1

Smart light is enabled by d , enter OSD menuefault. To switch the mode of smart light ( -7) Figure 3 and

select Light > Smart Light.

Configuring Smart Light Adjustment4.2

In the s lmart ight mode, configure the maximum brightness level of the smart light, and the device

will change brightness automatically according to the ambient lighting condition. You can also

configure the sensitivity of the smart light.

Configuring Brightness Level

O . n the OSD menu, select Light > Smart Light > LevelStep 1

Select from 1 5 to to configure the maximum brightness level. Step 2

The maximum brightness level is 5 . by default

Click Return and then Exit to exit the configuration. Step 3

You can also configure the brightness level manually in Light > Manual > Level.

Configuring Sensitivity

Select Light > > . Smart Light SensitivityStep 1

Select from 1 5 to to configure the sensitivity value of the smart light. Step 2

 The higher the value is, the easier the smart light will be woken up.

 The sensitivity value is 3 by default.

Click Return and then Exit to exit the configuration. Step 3

5 CameraSmart Dual Illuminators s Configuration

Smart dual illuminators camera supports three light modes: Smart IR&WL, , . WL mode IR mode

On the OSD menu, select Illuminator, and then view the three different modes.

 Smart IR&WL: Turn on the IR light in low ambient brightness. If SMD or IVS has been associated

with smart dual illuminators cameras, and when the SMD detects people and vehicles on the

screen, or perimeter rules are triggered IVS, then the camera will be contr by the olled to turn on

the warm light the , and the screen automatically switch to full-color. When SMD or IVS has

detected that no rules are triggered by people and vehicles, the camera will turn off the warm

light and turn on the IR light to switch to the black & white night vision.

 WL mode: If the screen is full-color in low ambient brightness, then the camera is a full-color

camera.

 IR mode: If the screen is black & white in low ambient brightness, then the camera is an IR

camera.

Smart IR& WLFigure 4-1

Specyfikacje produktu

Marka:	Dahua Technology
Kategoria:	Kamera monitorująca
Model:	HAC-B1A51

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Dahua Technology HAC-B1A51, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Kamera monitorująca Dahua Technology

Dahua Technology Pro IPC-HDPW5442G-Z Instrukcja

15 Stycznia 2025

Dahua Technology N588D63S Instrukcja

30 Grudnia 2025

Dahua Technology N43BU82 Instrukcja

30 Grudnia 2025

Dahua Technology SD6C230I-HC Instrukcja

7 Października 2024

Dahua Technology Ultra IPC-HF7842F Instrukcja

7 Października 2024

Dahua Technology N83BU82 Instrukcja

6 Października 2024

Dahua Technology N45EFN2 Instrukcja

5 Października 2024

Dahua Technology N45EJN2 Instrukcja

5 Października 2024

Dahua Technology N85EFN2 Instrukcja

5 Października 2024

Dahua Technology Lite IPC-HDW1320S Instrukcja

4 Października 2024

Instrukcje Kamera monitorująca

Najnowsze instrukcje dla Kamera monitorująca

Technaxx TX-192 Instrukcja

28 Stycznia 2025

Toshiba IKS-WR7412 Instrukcja

13 Stycznia 2025

AVerMedia FC1320-P Instrukcja

13 Stycznia 2025

Digitus OptiMax DN-16037 Instrukcja

13 Stycznia 2025

Hikvision DS-2CE59U1T-AVPIT3ZF Instrukcja

12 Stycznia 2025

Hikvision IDS-2CD7526G0-IZHSY Instrukcja

12 Stycznia 2025

Hikvision DS-2CD2163G0-I(S) Instrukcja

12 Stycznia 2025

Hikvision DS-2CD2H83G1-IZS Instrukcja

12 Stycznia 2025

Speco Technologies O5LB1 Instrukcja

12 Stycznia 2025

ZKTeco AntarVis 2.0 Instrukcja

12 Stycznia 2025