Instrukcja obsługi Dahle 20834EC

Dahle Niszczarka do papieru 20834EC

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Dahle 20834EC (4 stron) w kategorii Niszczarka do papieru. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/4
20800 SERIES
DEPARTMENTAL SHREDDERS
20801 S
20801 C
20800 EC
20814
20822 EC
20830 EC
20831 EC
20835 EC
OPERATION MANUAL
20800.90.0830 - 01/04 –
Dahle North America, Inc.
375 Jaffrey Road
Peterborough, NH 03458
Tel: (603) 924-0003 • Fax: (603) 924-1616
Email: shredders@dahle.com
w w w . d a h l e . c o m
Congratulations on your purchase of a DAHLE Paper Shredder! We here at
DAHLE North America are dedicated to providing rugged and dependable
products for the large, and not so large office. We are sure your new DAHLE
Paper Shredder will meet or exceed your expectations of quality and service.
If you have any questions regarding your new DAHLE paper shredder, call your
sales representative, or call DAHLE N.A. Customer Service, toll free, at (800) 995-
1379 between 8:30 am and 5:00 pm Monday through Friday, EST.
Check off the model and record the serial number for your records in the space
provided below.
❏ ❏ ❏ ❏ 20801 S 20801 C 20800 EC 20814 ❏ 20822 EC
❏❏❏ 20830 EC 20831 EC 20835 EC
Serial Number: __________________________
DIAGRAM KEY
1. Main Plug
2. Feed Opening
3. Light Barrier
4. Bag Full Indicator
5. Door Ajar Indicator
6. Paper Jam Indicator
7. Forward Switch (electronic models)
7a. Reverse Switch (electronic models)
8. Power Switch (electronic models)
8a. On/Off/Reverse (manual models)
9. Shred Bag
10. Waste Bin
11. Door Handle
12. Door
BEFORE YOU CALL FOR SERVICE
SYMPTOM POSSIBLE CAUSES SOLUTION
No Power 1. ON/OFF Switch set to
wrong postion
Move Switch to “I” (on)
position
2. Unit unplugged Connect to outlet
3. Outlet dead Reset circuit breaker
4. Door not fully closed Close Door
5. Waste Bin full Empty Waste Bin
Low capacity 1. Cutting blades dry Lubricate cutting blades
according to instructions.
DAHLE SHREDDER SUPPLIES AND ACCESSORIES
Shred Bags (100 per box)
Item No. Models
701 Personal & 20300 Series
704 20400, 20500 & 20600 Series
705 20800 Series
706 High Capacity Models
Waste Bin
805 20800 Series
Shredder Oil (All Models)
740 Box of 4 16oz. Bottles
740G Box of 4 1gal Bottles
740G/1 1 gallon bottle
Automatic Oiling System
SAO-120 4 Liter Auto Oiler
READ ALL INSTRUCTIONS BEFORE OPERATING YOUR SHREDDER IF ANY OTHER PROBLEMS OCCUR. CALL YOUR AUTHORIZED DAHLE SERVICE DEALER
CHANGING THE SHRED BAG
When the Shred Bag (10) is full, the shredder will automatically shut down. On the
electronic models an LED indicator will light and an audible alarm will sound.
Changing the Shred Bag is quick and easy if you follow these simple directions.
1. Turn shredder off.
2. Open Door (12) using Door Handle (11) to expose Waste Bin (10) and Shred
Bag (9).
3. Pull the Waste Bin and full Shred Bag out of the shredder.
4. Dispose of full Shred Bag.
5. Install new Shred Bag in Waste Bin, draping end of Shred Bag over edge of
Waste Bin.
6. Push Waste Bin, with new Shred Bag installed, back into shredder.
7. Close Door (12).
8. Turn on shredder and continue shredding.
CARING FOR YOUR SHREDDER
Clean covers with a clean dry cloth. Do not use water or solvents. Make sure you
disconnect your shredder from its power source before cleaning.
Paper shredders, like all mechanical equipment, need proper maintenance to
ensure efficient operation. Periodic lubrication of the cutting blades is important to
offset the friction generated within the cutting head. Frequency of lubrication will
vary depending on the shred size and the amount of usage. A strip-cut shredder
receiving light use (1 – 2 hours per week) will require lubrication only once or
twice a month, while the same machine used 1 – 2 hours per day will require
lubrication weekly. A cross-cut shredder should be lubricated every ½ hour of
shredding time to maintain maximum capacity and efficiency.
The procedure for lubricating your shredder is simple, and can be performed by
any operator. The oil is packaged in a squeeze bottle and is applied directly to the
cutting blades through the feed opening (3). Run a fine stream of lubricant from
one side of the feed opening to the other. Run the shredder in REVERSE for a
few seconds to help distribute the lubricant evenly. You can now continue
shredding as usual.
DAHLE Shredder Oil is the only lubricant you should use in your paper shredder.
It has been specially formulated so as not to leave any residue that could attract
dust and clog the shredding mechanism. You can order DAHLE Shredder Oil
(item # 740) from your local dealer.
Repairs on your paper shredder should only be performed by qualified
technicians. If you need service, contact your local dealer, or you can contact
DAHLE North America Customer Service between 8:30 am and 5:00 pm EST at
(800) 995-1379.
SAFETY INSTRUCTIONS
• Read the operating instructions carefully before operating your shredder!
• Do not use in the vicinity of flammable liquids or gases.
• Do not use in the vicinity of corrosive materials.
• Do not expose to water or wet conditions.
• Do not let children operate this, or any other, office equipment.
• Do not reach into the cutting mechanism during operation - not even from
the top or with objects.
• Do not operate the shredder for a period of more than 5 minutes in no-load
operation (operation without paper).
• Keep hair clear of machine.
• Keep neckties clear of machine.
• Keep bracelets, or any other jewelry, clear of machine.
• Power connection must be accessible at all times.
• Disconnect from power supply before servicing.
• The safety devices must not be disabled or removed.
• Please make sure that the shredder gets sufficient ventilation (ventilating
grills must kept free).
BEFORE YOU SHRED
• Remove Transport Bolts with wrench provided.
• Record the Model and Serial Number in the space provided inside the front
cover.
• Be sure the electrical outlet provides the proper power for your shredder
(see rating label on rear of shredder).
• Install Shred Bag (see: “CHANGING THE SHRED BAG”).
TURNING ON YOUR SHREDDER
20801 S •••• 20801 C
1. ON, OFF and REVERSE are controlled by the black
Rocker Switch (8a) on the top of the shredder.
2. Moving the switch to the “I” (ON) position
activates the shredding mechanism.
3. Moving the switch to the center or “O” (OFF)
position turns the shredder off.
4. The REVERSE position “R” will be discussed
in “CLEARING A PAPER JAM”.
NOTE: SHREDDER WILL NOT OPERATE UNLESS DOOR IS COMPLETELY CLOSED ALWAYS TURN SHREDDER OFF IF IT WILL BE UNATTENDED FOR LONG PERIODS OF TIME

Specyfikacje produktu

Marka: Dahle
Kategoria: Niszczarka do papieru
Model: 20834EC

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Dahle 20834EC, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Niszczarka do papieru Dahle

Dahle

Dahle 808 MS Instrukcja

7 Grudnia 2024
Dahle

Dahle PS 420 Instrukcja

7 Grudnia 2024
Dahle

Dahle PaperSAFE PS 140 Instrukcja

2 Października 2024
Dahle

Dahle ShredMATIC SM 90 Instrukcja

2 Października 2024
Dahle

Dahle PaperSAFE PS 100 Instrukcja

2 Października 2024
Dahle

Dahle PaperSAFE PS 240 Instrukcja

2 Października 2024
Dahle

Dahle ShredMATIC SM 300 Instrukcja

2 Października 2024
Dahle

Dahle PowerTEC 818 HD Instrukcja

2 Października 2024
Dahle

Dahle PaperSAFE PS 260 Instrukcja

2 Października 2024
Dahle

Dahle CleanTEC 51522 Instrukcja

19 Września 2024

Instrukcje Niszczarka do papieru

Najnowsze instrukcje dla Niszczarka do papieru

Digitus

Digitus DA-81606 Instrukcja

13 Grudnia 2024
Bonsaii

Bonsaii C261-D Instrukcja

5 Grudnia 2024
Fellowes

Fellowes Powershred 79Ci Instrukcja

15 Października 2024
GBC

GBC Momentum X26-32 Instrukcja

8 Października 2024
GBC

GBC AutoFeed+ 300M Instrukcja

8 Października 2024
GBC

GBC AutoFeed+ 150X Instrukcja

8 Października 2024
GBC

GBC Momentum X18-12 Instrukcja

8 Października 2024
GBC

GBC AutoFeed+ 300X Instrukcja

8 Października 2024
Fellowes

Fellowes Powershred C-525 Instrukcja

8 Października 2024
Bonsaii

Bonsaii S120-C Instrukcja

7 Października 2024