Instrukcja obsługi Daewoo Tornado Cylinder

Daewoo nieskategoryzowany Tornado Cylinder

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Daewoo Tornado Cylinder (10 stron) w kategorii nieskategoryzowany. Ta instrukcja była pomocna dla 11 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/10
2
Tornado Cylinder 700W Cyclonic Vacuum
FLR00046
User Manual
IMPORTANT RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should always be
followed. These instructions should be saved for future reference:
Read and familiarise yourself with all operating instructions before using this
Vacuum Cleaner.
Before plugging your unit into the mains, visually check that the unit is intact
and has not suffered any transit damage.
Check that the voltage indicated on the data plate corresponds with that of the
local network before connecting the appliance to the mains power supply.
This appliance can be used by persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have been given
supervision or instruction concerning use of the appliance in a safe way and
understand the hazards involved.
Children shall not play with the appliance.
Keep the appliance and its cord out of reach of children less than 8 years when it
is energised or cooling down.
Do not immerse the appliance or its cord in water or any other liquids.
Do not leave the appliance unattended during use.
Do not leave the appliance unattended whilst connected to the mains supply.
Do not use this appliance outdoors.
It is imperative to unplug the power cord after the appliance has been used,
before it is cleaned and whilst being repaired.
Repairs to electrical appliances should only be performed by a qualified
electrician. Improper repairs may place user at serious risk.
Do not operate this appliance with a damaged plug or cord, after a malfunction
or after being dropped or damaged in any way.
Regular, periodic checks should be carried out on the mains cable to
ensure no damage is evident. Should there be any signs of damage the
appliance should not be used.
If the power cable is damaged, it should only be replaced by the manufacturer
or a suitable qualified after-sales-service in order to avoid a hazard
Do not allow the mains cable to hang over sharp edges or come in contact with
hot surfaces.
Allow the unit to cool before storage.
Before cleaning, disconnect the appliance from the mains supply and allow to
cool.
This appliance is intended for household use only and should not be used for
industrial purposes.
Do not use any accessories or attachments with this appliance other than those
supplied or recommended by supplier.
Do not use this appliance for anything other than its intended use.
Do not push objects into any openings as damage to the appliance and/or
electric shock may occur.
Unplug after each use. Grasp the plug, not the cord.
3
Tornado Cylinder 700W Cyclonic Vacuum
FLR00046
User Manual
IMPORTANT RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
Do not pull or carry the Vacuum Cleaner by the electrical cord, use the handle
provided.
Ensure fingers and other objects are never placed in any part of the vacuum
cleaner. Clothing or hair may become trapped if the vacuum is used
improperly.
Keep hair, loose clothing, jewellery, fingers and all parts of the body away
from openings and moving parts.
Keep all air vents clear and free of dust, lint, hair and anything else that may
reduce airflow.
Avoid directing the appliance towards naked flames as the air discharged may
extinguish gas fires or pilot lights and may disturb ashes in open fires.
Do not Vacuum water or any other liquids with this vacuum.
Do not Vacuum hot ashes or lit cigarettes, etc.
Description of Parts Vacuum Cleaner (rear view)
Description of Parts Accessories
1. Cyclonic filter assembly
2. On/off button
3. Rear air outlet & Hepa filter
4. Power/speed controller
5. Mains cable & plug
6. Cylinder release button
7. Cable retract button (press to retract
cable)
8. Wheel(s)
9. Dust compartment
10. Air intake/hose connector
11. Floor tool
12. Crevice & Upholstery multi tool
13. Flexible hose
14. Hose connector
15. Air control valve
16. Hose tool connector
17. Telescopic Tube
1
2
3
5
6
7
8
15
17
9
11
12
13
16
14
10
4
Tornado Cylinder 700W Cyclonic Vacuum
FLR00046
User Manual
IMPORTANT RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
Description of Parts Cylinder detail
Assembling Your Vacuum Cleaner
CAUTION Ensure that the vacuum cleaner is not connected to the mains supply before using
the attachments.
Attaching the Flexible Hose (13) to the vacuum
Attach the Flexible Hose 3) to the vacuum cleaner by pushing the (1 Hose Connector 4(1 )
into the Air Intake (10) and rotating anticlockwise, arrowed below:
NB to remove the hose, rotate the Hose Connector 4) clockwise and pull out. (1
Attaching the Telescopic Tube (17) and Floor Tool (11)
1. Push the Telescopic Tube 7) onto the (1 Hose tool connector 6) as shown below left: (1
2. Extend the Telescopic Tube (17) to the desired length by pushing the catch down and
extending.
3. Attach the Floor Tool (11) to the other end as shown above.
20
19
18
18. Filter cover
19. Cyclonic filter
20. Dust release catch
1
2
3
Telescopic Tube
Hose Tool Connector
Telescopic Tube
Telescopic Tube
Telescopic Tube
Floor Tool
1
2
5
Tornado Cylinder 700W Cyclonic Vacuum
FLR00046
User Manual
IMPORTANT RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
Using Your Vacuum Cleaner
1. Pull the Mains Cable Plugand (5) out of the vacuum cleaner, being careful not the
pull the cable out beyond the red mark but after the yellow mark.
2. Insert the mains plug into the nearest socket.
3. Press the On/off button (2) to power up the vacuum.
NB Adjust the lever on the Floor Tool (11) according to the type of floor being cleaned. Push
the lever down for use on hard floors (i.e. non carpeted), pull the lever up for vacuum
cleaning carpets:
Using the Crevice & Upholstery multi tool 2) (1
Attach the C vice & Upholstery multi toolre 2(1 ) onto the Telescopic Tube (17) to
clean carpet edges, upholstered furniture and hard to get at areas:
NB If the Telescopic Tube (1 ) 7 is not required, attach the Crevice & Upholstery multi tool
(1 ) 2 or the Floor tool 1(1 ) directly to the Hose tool connector 6) on the end of the flexible (1
hose, this useful whilst cleaning soft furnishings, stairs, etc. as below:
Left: Adjust the lever on the
Floor Tool for carpeted or
hard floors:
Up for carpets
Down for hard floors
Left: Attached the Crevice &
Upholstery multi tool to
clean carpet edges
Right: Fold the brush down
to clean hard to get at areas
and upholstery.
Left: Attached the Crevice &
Upholstery multi tool to the
Hose. Use the brush to clean
upholstery.
Right: Attached the Floor
tool to the Hose to clean the
stairs.


Specyfikacje produktu

Marka: Daewoo
Kategoria: nieskategoryzowany
Model: Tornado Cylinder

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Daewoo Tornado Cylinder, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje nieskategoryzowany Daewoo

Instrukcje nieskategoryzowany

Najnowsze instrukcje dla nieskategoryzowany

Asko

Asko DBI644MIB.S.TW/1 Instrukcja

28 Października 2024
Asko

Asko DFS233IB.S.TW/1 Instrukcja

28 Października 2024
Emko

Emko EZM-9920 Instrukcja

27 Października 2024
Emko

Emko ESM-3712-H Instrukcja

27 Października 2024
Emko

Emko ATS-10 Instrukcja

27 Października 2024
Emko

Emko EAOM-11.2 Instrukcja

27 Października 2024
Emko

Emko EPM-3790 Instrukcja

27 Października 2024
Emko

Emko EPM-7790 Instrukcja

27 Października 2024
Livarno Lux

Livarno Lux IAN 108340 Instrukcja

27 Października 2024
Livarno Lux

Livarno Lux HG06009A-BS Instrukcja

27 Października 2024