Instrukcja obsługi Daewoo KOR-6006

Daewoo Magnetostrykcja KOR-6006

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Daewoo KOR-6006 (10 stron) w kategorii Magnetostrykcja. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/10

MICROWAVE OVEN

INSTRUCTION MANUAL

Model: KOR-6006

Please read this booklet carefully before fixing and using, and

save it for future reference.

1.Microwave is a kind of high frequency electromagnetic wave, which is commonly distributed in the nature.

But the existing form of microwave is dispersed so that it cannot be collected together for heating purpose.

The key component of magnetron of microwave oven will transform the energy of electricity to microwave

and huge energy of microwave field is established under the closed cavity. So the molecule of food is

caused to vibrate at very high speed and the friction heat produced will cook the food in a fast way.

2. There is 3 properties of microwave, that is

a) Absorbability, the microwave can cause the excess vibration of molecule of various food so as to obtain

the heating purpose. But the infiltration ability is largely depend on the size, thickness and properties of the

food.

b) Penetrability, microwave can penetrate through ceramics, glass, temperature-resistant plastics. It is

required to use the containers whose material have good microwave penetrability to achieve best heating

result. See the below utensils guide.

c) Reflectivity, microwave would be reflected by the metal wall of interior cavity so as to establish an even

magnetic field, thus can prevent the overheating of partial area.

Installation of microwave oven

1) To ensure sufficient ventilation, the distance of the back of microwave to the wall should be at least

10 cm, the side to the wall should be at least 5cm, the free distance above the top surface at least 20

cm.

2) Do not place any objects on the top of microwave oven.

3) Do not place any objects on the top of microwave oven.

4) The position of the oven shall be such that it is far from the TV, Radio or antenna as picture

disturbance or noise may occur.

5) The appliance must be positioned so that the plug is accessible.

6) The microwave oven is intended to be used freestanding and shall not be placed in a cabinet.

7) To keep the microwave oven at a distance from the wall, it is necessary to install a distance limiter.

Push Distance Limiter

in this direction

Alternative 2

1)Push Distance Limiter in the given direction;

2)Make sure Clasp A is secured to Hole A;

Secure Clasp A to Hole A

Hole A

Clasp A

Hole A

Distance Limiter

3)Insert Clasp B and Clasp C into their respective square holes.

Clasp C

Clasp B

Utensils guideline

Before use check that utensils are suitable for use in microwave oven. Take the reference of below table. In

the table marked as “○“ is applicable, “ X ” is not applicable.

Material of container Microwave

Heat-resistant glass ○

Ceramic ○

Ordinary glass X

Heat-resistant plastic ○

Ordinary plastic X

Thin Plastic film ○

Metal Grill X

Metal container X

For the first use

As there is manufacturing residue or oil remained on the oven cavity or heat element, it usually would smell

The door, even a slight smoke, it is normal case and would not occur after several times use, keep the door

or window open to ensure good ventilation.

So it is strongly recommended to place a cup of water in the turntable and set at high power and operate

for several times

Product introduction

1) Door interlock ensure that microwave oven can only be activated when the door is properly closed.

2) Viewing Window cooking status can be viewed through metal mesh.

3) Rotating axis driving the glass turntable rotating

4) Rotating ring supporting the glass turntable

5) Turntable it turns to make food heated evenly when cooking,

recommend using it when cooking.

6) Control panel see below in details (the control panel is subject to

change without prior notice)

7 Wave guide cover (inside) Warning: never remove it during cleaning.

See fig.1

Fig.1

Specyfikacje produktu

Marka:	Daewoo
Kategoria:	Magnetostrykcja
Model:	KOR-6006

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Daewoo KOR-6006, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Magnetostrykcja Daewoo

Daewoo KOR-161H Instrukcja

8 Marca 2025

Daewoo kor 816 t Instrukcja

7 Lutego 2025

Daewoo MCM980a Instrukcja

4 Lutego 2025

Daewoo KOR 63D7 Instrukcja

17 Stycznia 2025

Daewoo KOR-63CS8A18 Instrukcja

17 Stycznia 2025

Daewoo KOR-121MOS Instrukcja

17 Stycznia 2025

Daewoo KOR-161G Instrukcja

17 Stycznia 2025

Daewoo KOR-128MOP Instrukcja

17 Stycznia 2025

Daewoo koc-873ta Instrukcja

17 Stycznia 2025

Daewoo KOG-37D7SLG Instrukcja

17 Stycznia 2025

Instrukcje Magnetostrykcja

Najnowsze instrukcje dla Magnetostrykcja

Candy CFG 1775X Instrukcja

6 Kwietnia 2025

Siemens HF 17555 Instrukcja

6 Kwietnia 2025

Privileg PCMF 222220 X Instrukcja

6 Kwietnia 2025

Koenig Microwave 2000 Instrukcja

6 Kwietnia 2025

Samsung g 2618 c Instrukcja

5 Kwietnia 2025

Whirlpool AMW 921 IXL Instrukcja

4 Kwietnia 2025

Junker JM16GA52 Instrukcja

3 Kwietnia 2025

Baumatic BMC460BGL Instrukcja

3 Kwietnia 2025

Scholtes F 2785 G Instrukcja

3 Kwietnia 2025

Samsung MG22M8274CT Instrukcja

3 Kwietnia 2025