Instrukcja obsługi Da-Lite NET-100

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Da-Lite NET-100 (4 stron) w kategorii Niet gecategoriseerd. Ta instrukcja była pomocna dla 8 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/4
INSTALLATION GUIDE FOR
Da-Lite NET100
2
When connecting the NET100, there are three connections that
must be made to the SCB100 for proper operation: Power
+12Vdc, RS232 Communication and Ethernet.
NOTE: If you ordered your screen with a built-in SCB100 it will
come equipped with a 11-pin phoenix connector. The NET100 will
be equipped with a 2-pin plug and 3-pin plug for connection. The
2-pin plug will plug into #10 and #11 and the 3-pin plug will plug
into #4, #5 and #6. (See Fig. 1)
Product Description
The NET100 is an Ethernet adapter to the SCB100 Serial Control Board for Da-Lite motorized screens and projector lifts. This Ethernet
adapter allows remote control of a screen or lift through a TCP/IP connection.
The NET100 is classiied as a serial device server, which by deinition means that it makes available to client computers the Da-Lite
screen or lift as a serial device (enabled by the SCB100). The NET100 supports the suite of RS232 commands developed under the
SCB100, and allows those commands to be issued by an Ethernet enabled computer or third party controller.
Installation
Figure 1
Terminal
Block
3Pin Plug
RS232 Communication
2Pin Plug
+12VDC Output
If you did not order your screen with a built-in SCB100, remove the 2-pin and 3-pin connectors from the NET100. Refer to (Fig. 2)
Once these connections have been made and power
is supplied to the SCB100, the NET100 will be
powered from the SCB100.
Upon a successful connection, the power LED and
the status LED will turn on solid green. The green
10/100 Mb Link LED indicates the presence of
communication between the NET100 and
one or more nodes on the network.
Power II IPut
120VAC / 60Hz
Back Of
Wall Switch
Red (Tx)
Black (Rx)
Green (Ground)
Front Of
Wall Switch
NOTE: 2024AWG Wire
Recommended For Connecting
Wall Switch To The SCB100
Controller
RJ45 Connector
RJ45 Ethernet
Connection
Black With White
Stripe 12VDC+
Black Solid
12VDC -
DB25 to RJ45
Adaptor
Strain Relief
Black (Hot)
Green (Ground)
White (Common)
Black (Hot)
Green (Ground)
White (Common)
+ 120 VDC OUT
Red Up
Black (Down)
White (Common)
Red (Up)
Black (Down)
White (Common)
Rx - Data In
G - Ground
TX - Data Out
RX - Data In
G - Ground
Tx - Data Out
WBR
- 120 VDC OUT
Up
Stop
Down
RJ45 PINOUT
PIN - 3 RX
PIN - 4 TX
PIN - 5 GR
PIN - 6 NOT USED
Figure 2
3
Coniguration
The NET100 is designed for simple, transparent installation and
coniguration. By default the NET100 is shipped with DHCP
disabled. The following IP address is assigned to the NET100.
IP Address: 192.168.1.100
Subnet: 255.255.255.0
To conigure the network settings, type the IP address into your
browser. It will open a new page with the setup proile. A new
window will pop up asking for a user name and password. Leave
the user name and password ield blank and press the OK
button.
The new window will contain the coniguration browser program.
The menu will be located on the left side of page. Click on
"Network".
For DHCP click on "Obtain IP address automatically" and type in
the DHCP HostName. For Static IP leave the option "Use the
following IP coniguration" clicked and type in the IP address and
Subnet Mask. Then click the "OK" button. Finally click on the
"Apply Settings" in the left menu.
Network Menu
OK Button
Blank
OK Button
Apply Settings

Specyfikacje produktu

Marka: Da-Lite
Kategoria: Niet gecategoriseerd
Model: NET-100

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Da-Lite NET-100, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Niet gecategoriseerd Da-Lite

Instrukcje Niet gecategoriseerd

Najnowsze instrukcje dla Niet gecategoriseerd

DeWalt

DeWalt DWH303DH Instrukcja

12 Października 2024
DeWalt

DeWalt DWH302DH Instrukcja

12 Października 2024
DeWalt

DeWalt DWV010 Instrukcja

12 Października 2024
DeWalt

DeWalt DWH304DH Instrukcja

12 Października 2024
Roland

Roland Fantom FA-76 Instrukcja

12 Października 2024
Florabest

Florabest HG00358 Instrukcja

12 Października 2024
Biltema

Biltema 87-789 Instrukcja

12 Października 2024
Roland

Roland M-1000 Instrukcja

12 Października 2024
GYS

GYS Neopulse 220 C XL Instrukcja

12 Października 2024
Domyos

Domyos ST Comfort Instrukcja

12 Października 2024