Instrukcja obsługi D-Link DCS-9500T

D-Link Kamera monitorująca DCS-9500T

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla D-Link DCS-9500T (91 stron) w kategorii Kamera monitorująca. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/91
Group Temperature Screening Camera
User Manual
Issue V1.1（2020-04-09） 1
Group Temperature
Screening Camera
User Manual
Issue V 1.0
Data 2020-06-09
Precautions
Precautions
Fully understand this document before using this device, and strictly observe rules in this
document when using this device. If you install this device in public places, provide the
tip "You have entered the area of electronic surveillance" in an eye-catching place.
Failure to correctly use electrical products may cause fire and severe injuries. To prevent
accidents, carefully read the following context:
Symbols
This document may contain the following symbols whose meanings are described
accordingly.
Symbol Description
It alerts you to fatal dangers which, if not avoided, may
cause deaths or severe injuries.
It alerts you to moderate dangers which, if not avoided,
may cause minor or moderate injuries.
It alerts you to risks. Neglect of these risks may cause
device damage, data loss, device performance
deterioration, or unpredictable results.
It provides a tip that may help you resolve problems or
save time.
It provides additional information.
To prevent electric shocks or other dangers, keep power plugs dry and clean.
Strictly observe installation requirements when installing the device. The
manufacturer shall not be held responsible for device damage caused by users' non-
conformance to these requirements.
Strictly conform to local electrical safety standards and use power adapters which are
marked with the LPS standard when installing and using this device. Otherwise, this
device may be damaged.
Use accessories delivered with this device. The voltage must meet input voltage
requirements for this device.
If this device is installed in places with unsteady voltage, ground the device to
discharge high energy such as electrical surges in order to prevent the power supply
from burning out.
When this device is in use, ensure that no water or any liquid flows into the device. If
water or liquid unexpectedly flows into the device, immediately power off the device
and disconnect all cables (such as power cables and network cables) from this device.
Do not place the thermal imaging camera and unpackaged products at a radiation
source with a high intensity regardless of whether the device is in the normal power-
on state, for example, the sun, laser, and electric arc welder, and place the thermal
imaging camera and unpackaged products against objects with a high heat source, for
example, the sun. Otherwise, the accuracy of the thermal imaging camera will be
affected. In addition, the detector in the thermal imaging camera may be permanently
damaged.
If this device is installed in places where thunder and lightning frequently occur,
ground the device nearby to discharge high energy such as thunder strikes in order to
prevent device damage.
Unless otherwise specified in the user manual, do not use the thermal imaging camera
in an environment with the temperature lower than -20 C (-4 F) or higher than 60 C  
(+140 F). Otherwise, the images displayed by the thermal imaging camera are
abnormal and the device may be damaged if working beyond the temperature range
for a long period.
During the outdoor installation, prevent the morning or evening sunlight incidence to
the lens of the thermal imaging camera. The sun shade must be installed and adjusted
according to the angle of the sunlight illumination.
Avoid heavy loads, intensive shakes, and soaking to prevent damages during
transportation and storage. The warranty does not cover any device damage that is
caused during secondary packaging and transportation after the original packaging is
taken apart.
This device is a static sensitivity device. Improper static may damage the thermal
imaging camera. ESD protection measures and reliable grounding must be well
prepared for device installation and uninstallation.
Protect this device from fall-down and intensive strikes, keep the device away from
magnetic field interference, and do not install the device in places with shaking
surfaces or under shocks.
Use a soft and dry cloth to clean the device body. In case that the dirt is hard to
remove, use a dry cloth dipped in a small amount of mild detergent and gently wipe
the device, and then dry it again. Pay special attention to the front window of the
thermal imaging camera because this is precision optics. If the front window has
water spots, use a clean and soft cloth moistened with water to wipe it. If the front
window needs further cleaning, use a soft cloth dampened with isopropyl alcohol or
detergent. Improper cleaning can cause damage to the device.
The lens window of the thermal imaging camera is designed to be applicable to an
outdoor environment. The window is coated with durable coating material, but may

Specyfikacje produktu

Marka: D-Link
Kategoria: Kamera monitorująca
Model: DCS-9500T

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z D-Link DCS-9500T, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Kamera monitorująca D-Link

D-Link

D-Link DCS-5605 Instrukcja

9 Stycznia 2025
D-Link

D-Link DCS-4625 Instrukcja

9 Stycznia 2025
D-Link

D-Link DCS-6110 Instrukcja

9 Stycznia 2025
D-Link

D-Link DCS-6210BS Instrukcja

5 Stycznia 2025
D-Link

D-Link DCS-6501LH/E Instrukcja

5 Stycznia 2025
D-Link

D-Link DCS-60 Instrukcja

5 Stycznia 2025
D-Link

D-Link DCS-2103 Instrukcja

5 Stycznia 2025
D-Link

D-Link DCS-6100LHV2 Instrukcja

1 Stycznia 2025
D-Link

D-Link DCS-931L Instrukcja

1 Stycznia 2025
D-Link

D-Link DCS-8330LH Instrukcja

13 Grudnia 2024

Instrukcje Kamera monitorująca

Najnowsze instrukcje dla Kamera monitorująca

Dahua Technology

Dahua Technology Pro IPC-HDPW5442G-Z Instrukcja

15 Stycznia 2025
Toshiba

Toshiba IKS-WR7412 Instrukcja

13 Stycznia 2025
AVerMedia

AVerMedia FC1320-P Instrukcja

13 Stycznia 2025
Digitus

Digitus OptiMax DN-16037 Instrukcja

13 Stycznia 2025
Hikvision

Hikvision DS-2CE59U1T-AVPIT3ZF Instrukcja

12 Stycznia 2025
Hikvision

Hikvision IDS-2CD7526G0-IZHSY Instrukcja

12 Stycznia 2025
Hikvision

Hikvision DS-2CD2163G0-I(S) Instrukcja

12 Stycznia 2025
Hikvision

Hikvision DS-2CD2H83G1-IZS Instrukcja

12 Stycznia 2025
Speco Technologies

Speco Technologies O5LB1 Instrukcja

12 Stycznia 2025
ZKTeco

ZKTeco AntarVis 2.0 Instrukcja

12 Stycznia 2025