Instrukcja obsługi CyberPower Rackbar RKBS20S4F10R

CyberPower Niesklasyfikowane Rackbar RKBS20S4F10R

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla CyberPower Rackbar RKBS20S4F10R (8 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/8
RackBar(tm)
Surge
User Manual
RKBS15S2F8R
RKBS15S2F10R
RKBS15S2F12R
RKBS15S4F8R
RKBS15S4F10R
RKBS15S4F12R
RKBS15S6F8R
RKBS15S6F10R
RKBS15S6F12R
RKBS20S2F8R
RKBS20S2F10R
RKBS20S2F12R
RKBS20S4F8R
RKBS20S4F10R
RKBS20S4F12R
RKBS20S6F8R
RKBS20S6F10R
RKBS20S6F12R
RKBS20ST2F8R
RKBS20ST2F10R
RKBS20ST2F12R
RKBS20ST4F8R
RKBS20ST4F10R
RKBS20ST4F12R
RKBS20ST6F8R
RKBS20ST6F10R
RKBS20ST6F12R
RackBar Surge Unit (RKBS) (1) Cord Retention Tray (1)
Bracket Mounting
Screws M4 X 6 (4pcs)
Cord Retainer Clips
(8/10/12 pcs - varies by model ) for
Cord Retention Tray
Documentation:
User Manual
Power
Distribution
Unit
User Manual
Product Registration Card
Product
Registration
Card
Before using, please check to ensure the package contains all the
items shown above. If there are missing parts please contact
CyberPower technical support at www.CPSww.com or call 1-877-
297-6937.
Cord Retention Tray
Mounting Screws M3 X 6
(4/8/12/16 pcs - varies by model)
1. Amperage:
2. Series:
3. Outlet Number Front
4. Outlet Number Rear
Amperage – 15A, 20A
NULL: =NEMA 5-15P / 5-20P
T: = NEMA L5-20P
Number of Outlets followed by F – Example 8F
Number of Outlets followed by R – Example 8R
Horizontal Installation
Used (1 set) Vertical Installation
Used (1 set)
Mounting Brackets
Ground Screw M4 X 6 (1 pcs)
2. The RKBS must only be plugged into a three-wire, grounded outlet on a
circuit protected by a fuse or circuit breaker. Connection to any other type
of power outlet may result in a shock hazard.
3. Do not use extension cords or adapters with this RKBS.
4. Never install a RKBS, or associated wiring or equipment, during a
lightning storm.
5. Check that the power cord, plug, and socket are in good condition.
6. This device features an internal protection that will disconnect the surge
protective component at the end of its useful life but will maintain power to
the load – now unprotected. If this situation is undesirable for the
application, follow the manufacturer’s instructions for replacing the device.
7. To prevent the risk of fire or electric shock, this RKBS
should be installed in a temperature and humidity controlled indoor area
free of conductive contaminants. Do not install this RKBS where
excessive moisture or heat is present..
Step 1 – Mounting bracket installation
Install the screws (M4 X 6) in holes diagonal from each other.
Step 2 – RKBS Mounting
Install the RKBS using fasteners compatible with the rack.
Install the RKBS using fasteners compatible with the rack.
Step 1 – Mounting bracket installation
Step 2 – RKBS Mounting
Install the screws (M4 X 6) in holes diagonal from each other.
1. Use ONLY the supplied hardware (including screws, pegs
and cord retainer clips) to attach the mounting brackets. Using different
hardware or improper installations may cause damage that is NOT
covered by this warranty.


Specyfikacje produktu

Marka: CyberPower
Kategoria: Niesklasyfikowane
Model: Rackbar RKBS20S4F10R

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z CyberPower Rackbar RKBS20S4F10R, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Niesklasyfikowane CyberPower

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

Stihl

Stihl HT 70 Instrukcja

15 Października 2024
Ernesto

Ernesto H14270 Instrukcja

15 Października 2024
Uniden

Uniden BT MIC KIT Instrukcja

15 Października 2024
Vaude

Vaude Omnis Bike 26 Instrukcja

15 Października 2024
ART

ART ProChannel II Instrukcja

15 Października 2024
Aukey

Aukey DR02J Instrukcja

15 Października 2024
Master Lock

Master Lock 653EURD Instrukcja

15 Października 2024
Roland

Roland FR-18 Diatonic Instrukcja

15 Października 2024