Instrukcja obsługi CyberPower Essential CSB7012

CyberPower Niesklasyfikowane Essential CSB7012

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla CyberPower Essential CSB7012 (4 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 8 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/4

CONGRATULATIONS ON YOUR PURCHASE

Thank you for selecting the CyberPower

CSB706/CSB7012 Surge Protector. This manual explains

the features and operation of the CSB706/CSB7012.

Please take a few moments to read this manual.

FEATURES

1. ON/OFF Reset Control Switch and Circuit Breaker

Controls power to all outlets. The switch is also a 15 A

breaker. When an overload occurs, it will automatically

switch o. To resume operation, ensure the overload

condition is removed and reset the surge protector by

switching the unit ON.

2. Surge Protected Indicator

Illuminated when the surge protection feature is

working properly.

3. Seven Standard Outlets

SPECIFICATIONS

• Model Number: CSB706/CSB7012

• Outlets: 7 Stnadard Outlets

• Surge Protection: 1500 Joules

• Electrical Rating: 125 V/15 A/1875 W

• UL Clamping Voltage: UL 1449 3rd/500 V (H-N, H-G, N-G)

• Maximum Peak Current: 60,000 A

• 3 AC Lines Protected: H-N: 30,000 A, H-G: 15,000 A,

N-G: 15,000 A

• Response Time: Less than 1 nanosecond

• Attenuation: Up to 32 dB

• Circuit Breaker: Resettable 15 Amp

• EMI/RFI Filtration: 150 kHz to 100 MHz

CAUTION

TO REDUCE THE RISK OF ELECTRIC SHOCK - Use only

in dry locations and only indoors. DO NOT plug into

another relocatable power tap. DO NOT “daisy chain”

surge protectors. use with any aquarium DO NOT

equipment. DO NOT use if properly grounded outlets are

not available. DO NOT install this device if there is less

than 10 meters (30 feet) or more of wire between the

electrical outlet and electrical service panel. DO NOT use

for medical or life support equipment. This device

features an internal protection that will disconnect the

surge protective component at the end of its useful life,

but it will maintain unprotected power to the load.

TROUBLESHOOTING

▪ If the ON/OFF is switched OFF, the 15 Amp circuit

breaker may have tripped. Examine your connected

equipment and remove the device that is overloading the

circuit. Then, turn the ON/OFF switch back to RESET.

▪ If the protected indicator does not light, the surge

protector’s AC lines are no longer protected from surge.

The surge protector may have received a power surge

or spike beyond its speciﬁed limits that overloaded the

protection circuitry and rendered it inactive. The surge

protector has protected your connected equipment as

designed, but it will not protect against future surges,

and spikes. It should be replaced.

TECHNICAL SUPPORT

Please contact our Tech Support Department with

installation, troubleshooting, or general product questions.

• Phone: 1-877-297-6937

• Email: tech@cpsww.com

• Hours of Operation:

Monday – Friday 7:00am – 6:00pm CST

USER MANUAL

7-Outlet Surge Protector

CSB706/CSB7012

7-Outlet Surge Protector

CSB706/CSB7012

3 4

LIMITED WARRANTY AND CONNECTED

EQUIPMENT GUARANTEE

Read the following terms and conditions carefully before

using the CyberPower CSB706/CSB7012 (the “product”). By

using the product, you consent to be bound by the terms

and conditions of this limited warranty and connected

equipment guarantee (together referred to as this

“warranty”). IF YOU DO NOT AGREE TO THE TERMS AND

CONDITIONS OF THIS WARRANTY, YOU SHOULD RETURN

THE PRODUCT FOR A FULL REFUND PRIOR TO USING IT.

Who is providing this warranty, and what does it cover?

Cyber Power Systems (USA), Inc. (“CyberPower”) provides

this limited warranty. It only covers the original purchaser

and ends if you no longer own the product. This warranty

covers defects in materials and workmanship in the product

under normal use and conditions. It also covers equipment

connected to the product damaged because of the failure of

the product. This warranty covers the product and

connected equipment for as long as you own the product.

How do you open a connected equipment claim?

1. Call us at (877) 297-6937, or write to us at Cyber Power

Systems (USA), Inc., 4241 12th Ave. E., STE 400, Shakopee,

MN 55379, or send us an email at claims@cpsww.com

within 10 days of the occurrence for instructions.

2. When you contact CyberPower, identify the product, the

purchase date, and the item(s) of connected equipment.

Have information on all applicable insurance or other

resources of recovery/payment that are available to the

initial customer, and request a claim number.

3. You must provide a dated purchase receipt (or other proof

of the original purchase) for the CyberPower unit and

connected equipment. You also need to provide a

description of the damage to your connected equipment.

4. Pack and ship the product to CyberPower and the item(s)

of connected equipment, a repair cost estimate for the

damage to the connected equipment, and all claim forms

that CyberPower provides to you. Show the claim number

on the shipping label, or include it with the product. You

must prepay all shipping costs. You are responsible for

packaging and shipment, and you must pay the cost of

the repair estimate.

What will CyberPower do to correct problems?

CyberPower will inspect and examine the product. If the

product is defective in material or workmanship, CyberPower

will replace it at CyberPower’s expense, or CyberPower will

refund the full purchase price you paid for the product

(purchase receipt showing price paid is required). If the

product failed to protect any equipment plugged into it, we

will also send you forms for making your claim for the

connected equipment. We will replace the equipment that

was damaged because of the failure of the product or pay

you the fair market value (NOT REPLACEMENT COST) of

This device is manufactured using environmentally-safe procedures in

compliance with the Restriction of Hazardous Substances (RoHS) directive.

Please join CyberPower in caring for the environment by recycling

this manual.

PRODUCT REGISTRATION

Prompt product registration assures coverage under the limited

warranty, and also allows the opportunity of notiﬁcations for

product enhancements, upgrades, and other announcements.

Registration is quick and easy. Go to the Product Registration

Page at www.cyberpowersystems.com/registration.

CONTACT INFORMATION

Cyber Power Systems (USA), Inc.

4241 12th Avenue East Suite 400

Shakopee, MN 55379

Toll-free: 1-877-297-6937 | CyberPowerSystems.com

the equipment at of the time of the damage. We will use Orion

Blue Book, another third-party valuation guide, eBay, Craigslist,

or other source to establish that amount. Our maximum liability

is limited to $125,000 for the CSB706/CSB7012.

Who pays for shipping?

We pay shipping when we send items to you; you pay when

you send items to us.

What are some things this Warranty does not cover?

1. THIS WARRANTY DOES NOT COVER: ANY SOFTWARE THAT

WAS DAMAGED, SOFTWARE THAT NEEDS TO BE REPLACED

DUE TO THE FAILURE OF THE PRODUCT, OR ANY DATA THAT

IS LOST AS A RESULT OF THE FAILURE. THIS WARRANTY

DOES NOT COVER THE RESTORATION OF DATA OR

RECORDS, OR THE REINSTALLATION OF SOFTWARE.

2. This warranty does not cover: misuse, modiﬁcation, operation

or storage outside of the environmental limits of the product

or the equipment connected to it. It does not cover damage

while in transit or in storage; if there has been improper

operation or maintenance, or use with items not designed or

intended for use with the product, such as laser printers,

appliances, aquariums, medical, or life support devices, etc.

What are the other limitations?

The sole and exclusive remedies of the initial customer are

those provided by this warranty.

1. This warranty does not apply unless the product and the

connected equipment were connected to properly wired and

grounded outlets (including compliance with electrical and

safety codes of the most current electrical code), without the

use of any adapters or other connectors.

2. The product must have been plugged directly into the power

source. The equipment connected to the product must be

directly connected in the product, not “daisy chained”

together in serial fashion with any extension cords, another

product, or device similar to the product, surge suppressor,

or power tap. Any such installation voids the warranty.

3. The product and connected equipment must have been used

properly in a suitable environment, in conformance with any

applicable license, instruction manual, or warnings.

4. The product must have been used at all times within the

limitations on the product’s VA capacity.

Where can I get more information?

Cyber Power Systems (USA), Inc.

4241 12th Avenue East Suite 400

Shakopee, MN 55379;

Call us at (877) 297-6937;

Send us an email at claims@cpsww.com.

CyberPowerSystems.com

All other trademarks are the property of their respective owners.

UL Listed to U.S. and Canadian Safety Standards UL 1449. This product

is listed to applicable U.S. and Canadian safety standards by

Underwriters Laboratories Inc.

Full compliance with RoHS.

K01-0000665-01

K01-0000722-00

Specyfikacje produktu

Marka:	CyberPower
Kategoria:	Niesklasyfikowane
Model:	Essential CSB7012

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z CyberPower Essential CSB7012, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Niesklasyfikowane CyberPower

CyberPower Rackbar RKBS20ST6F12R Instrukcja

12 Października 2024

CyberPower PR1000ELCDRT2U Instrukcja

10 Października 2024

CyberPower Essential B704 Instrukcja

10 Października 2024

CyberPower SB0602BA-DE-B50 Instrukcja

9 Października 2024

CyberPower SB0802AD-DE-W24 Instrukcja

9 Października 2024

CyberPower SB0502BA-DE-B70 Instrukcja

9 Października 2024

CyberPower SB0502BA-DE-W70 Instrukcja

9 Października 2024

CyberPower SB0702AD-DE-B30 Instrukcja

9 Października 2024

CyberPower SB0602BA-DE-W18 Instrukcja

9 Października 2024

CyberPower SB0702AD-DE-W30 Instrukcja

9 Października 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

Black Diamond BD1121530000ALL1 Instrukcja

15 Października 2024

Husqvarna K 970 SmartGuard Instrukcja

15 Października 2024

Stihl HT 70 Instrukcja

15 Października 2024

Ernesto H14270 Instrukcja

15 Października 2024

Uniden BT MIC KIT Instrukcja

15 Października 2024

Vaude Omnis Bike 26 Instrukcja

15 Października 2024

ART ProChannel II Instrukcja

15 Października 2024

Aukey DR02J Instrukcja

15 Października 2024

Master Lock 653EURD Instrukcja

15 Października 2024

Roland FR-18 Diatonic Instrukcja

15 Października 2024