Instrukcja obsługi Ctek XS 0.8

Ctek Ładowarka baterii XS 0.8

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Ctek XS 0.8 (5 stron) w kategorii Ładowarka baterii. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/5
EN
EN • 3
ERROR LAMP
FU
LL
Y CH GEDARREADY TO USE
POWER LAMP
CHARGING
1. Connect the charger to the battery.
2. Connect the charger to the wall socket. The power lamp will indicate that the mains
cable is connected to the wall socket. The error lamp will indicate if the battery clamps
are incorrectly connected. The reverse polarity protection will ensure that the battery
or charger will not be damaged.
3. Follow the 6-step display through the charging process.
The the engine battery is ready to start 3 when STEP is lit.
The when battery is fully charged 5 STEP is lit.
4. Stop charging at any time by disconnecting the mains cable from the wall socket.
C GON RATULATIONS
to the purchase of your new professional switch mode battery charger. This charger is
included in a series of professional chargers from CTEK SWEDEN AB and represents the
latest technology in battery charging.
CTEK COMFORT CONNECT – eyelet M6
12V/0.8 A
XS 0.8
CTEK COMFORT CONNECT
MAINS CABLE
CTEK COMFORT CONNECT – clamp
CHARGE CABLE
SUPPLY PLUG*
*Supply plugs may differ to suit your wall socket.
MANUAL
20014896E XS 0 8 Manual EU Print file 003 indd 3 2011 10 10 16:25:43
4 • EN
BATTERY SIZE (Ah) TIME TO 80% CHARGED
2Ah 2h
8Ah 8h
20Ah 20h
32Ah 32h
READY TO EUS
The table shows the estimated time for empty battery to 80% charge
ERROR LAMP
If the error lamp is lit, check the following:
1. I s the chargers positive lead connected to the
batterys positive pole?
2. Is the charger connected to a 12V battery?
3. H as charging been interrupted in EP 1 or step 4? ST
Restart the charger. If charging is still being interrupted, the battery…
STEP 1: …is seriously sulphated and may need to be replaced.
STEP 4: …can not keep charge and may need to be replaced.
TE NICAL SPECIFICATIONSCH
Charger model XS 0.8
Model number 1047
Rated Voltage AC 220–240VAC, 50–60Hz
Charging voltage 14.4V
Start voltage 2.0V
Charging current 0.8A max
Current, mains 0.2A rms (at full charging current)
Back current drain* <1Ah/month
Ripple** <4%
Ambient
temperature
-20°C to +50°C, output power is reduced
automatically at high temperatures
Charger type Six step, fully automatic charging cycle
Battery types All types of 12V lead-acid batteries
(WET, MF, Ca/Ca, AGM and GEL)
Battery capacity 1.2―32Ah up to 100Ah for maintenance
Dimensions 145 x x x W x 55 38mm (L H)
Insulation class IP65
Weight 0.4kg
*) Back current drain is the current that drains the battery if the charger is not connected
to the mains. back a CTEK chargers has very low current.
**) The quality of the charging voltage and charging A current is very important. high
current ripple heats up the battery which has an aging effect on the positive electrode.
High voltage ripple could harm other equipment the that is connected to battery. CTEK
battery chargers produce very clean voltage and current with low ripple.
POWER LAMP
If the power lamp is lit with a:
1. S T EADY LIGHT
The mains cable is connected to the wall socket.
2. F LASHING LIGHT:
The charger has entered the energy save mode. This happens if the
charger isn´t connected to the battery in 2 minutes.
20014896E XS 0 8 Manual EU Print file 003 indd 4 2011 10 10 16:25:44
EN
EN • 5
st suEP 1 dE LPhAtiON
Detects -sulphated batteries. Pulsing cur
rent and voltage, removes sulphate from
the lead plates of the battery restoring
the battery capacity.
stEP 2 BuLK
Charging with maximum current until
approximately 80% battery capacity.
st ORPEP 3 sAB tiON
Charging -with declining current to maxi
mize up to 100% battery capacity.
stEP 4 ANALysE
Tests if the battery can hold charge.
Batteries that can not hold charge may
need to be replaced.
stEP 5 f tLOA
Maintaining the battery voltage at
maximum level by providing a constant
voltage charge.
stEP 6 PuLsE
Maintaining the battery at 95–100%
capacity. The charger monitors the
battery voltage and gives a pulse when
necessary to keep the battery fully
charged.
1
VOLTAGE (V)CURRENT (A)
ANALYSE PULSE
DESULPHATION BULK ABSORPTION
Increasing voltage
to 14.4V
0.8A
1 5
LIMIT
Max 20h Max 10h 3 minutes 10 days
Charge cycle restarts
if voltage drops
Charge cycle restarts
if voltage drops
Max 8h
14.4V 14.4V
Declining current
Checks if voltage
drops to 12V
13.6V
0.8A
12.7V‒14.4V
0.8‒0.4A
2 3 4
FLOAT
6
chARgiNg PROgRAM
XS 0.8 is equipped with a multi purpose charging program. – XS 0.8 charges all batteries 1.2 32Ah
and –maintains all batteries 1.2 100Ah in the temperature range of -20˚ to +50˚C (-4˚F to +122˚F).
CTEK SWEDEN AB, issues this limited warranty to the original purchaser
of warranty not warranty this product. This limited is transferable. The
applies faults to manufacturing 5 and material defects for years from the
date of purchase. The customer must return the product together with the
receipt of purchase to the point of purchase. This warranty is void if the
battery charger has been opened, handled carelessly or repaired by
anyone other than CTEK SWEDEN AB or its authorised representatives.
CTEK SWEDEN AB makes no warranty other than this limited warranty and
is costs those not liable for any other other than mentioned above, i.e. no
consequential damages. Moreover, CTEK SWEDEN AB is not obligated to
any other warranty other than this warranty.
LiMitEd WARRANty
20014896E XS 0 8 Manual EU Print file 003 indd 5 2011 10 10 16:25:44

Specyfikacje produktu

Marka: Ctek
Kategoria: Ładowarka baterii
Model: XS 0.8

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Ctek XS 0.8, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Ładowarka baterii Ctek

Ctek

Ctek READY AUTOMOTIVE Instrukcja

4 Października 2024
Ctek

Ctek MXS 5.0 CHECK Acculader Instrukcja

25 Września 2024
Ctek

Ctek MXS 5.0 POLAR Acculader Instrukcja

25 Września 2024
Ctek

Ctek MXS 5.0 Test and Charge Acculader Instrukcja

25 Września 2024
Ctek

Ctek PRO25SE Acculader Instrukcja

23 Września 2024
Ctek

Ctek MXTS70 Acculader Instrukcja

23 Września 2024
Ctek

Ctek MXT 14 Acculader Instrukcja

23 Września 2024
Ctek

Ctek MXS 3.8 Acculader Instrukcja

23 Września 2024
Ctek

Ctek Njord Go Acculader Instrukcja

23 Września 2024
Ctek

Ctek D250TS Acculader Instrukcja

23 Września 2024

Instrukcje Ładowarka baterii

Najnowsze instrukcje dla Ładowarka baterii

Graupner

Graupner Ultramat 12 Instrukcja

13 Stycznia 2025
Graupner

Graupner ULTRA DUO PLUS 30 Instrukcja

13 Stycznia 2025
Fuxtec

Fuxtec FX-E1LG1A Instrukcja

13 Stycznia 2025
Voltcraft

Voltcraft Charge Manager 410 Instrukcja

11 Stycznia 2025
Nitecore

Nitecore UHX1 PRO Instrukcja

11 Stycznia 2025
Envivo

Envivo ENV-1597 Instrukcja

11 Stycznia 2025
Xblitz

Xblitz XC1 Instrukcja

10 Stycznia 2025
Jackery

Jackery Explorer 240 v2 Instrukcja

7 Stycznia 2025
Jackery

Jackery Explorer 1000 v2 Instrukcja

7 Stycznia 2025
Schwaiger

Schwaiger LSET500 513 Instrukcja

7 Stycznia 2025