Instrukcja obsługi Crunch DSX462

Crunch Speaker DSX462

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Crunch DSX462 (4 stron) w kategorii Speaker. Ta instrukcja była pomocna dla 7 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/4
B E N U T Z E R H A N D B U C H
O W N E R , S M A N U A L
L O U D S P E A K E R S
D S X 4 2
D S X 5 2
D S X 6 2
D S X 4 6 2
D S X 5 7 2
D S X 6 9 3
D S X 3 2 D S X 1 2 0
WICHTIG!
INSTALLATION DER LAUTSPRECHER
ANSCHLUSS DER LAUTSPRECHER
DEUTSCH
ANSCHLÜSSE
FÜR DEN VERSTÄRKER
LINKER KANAL
LAUTSPRECHER LINKS
ANSCHLÜSSE
FÜR DEN VERSTÄRKER
RECHTER KANAL
LAUTSPRECHER RECHTS
IMPORTANT
Please observe the correct polarity (+ and –) of all connections.
INSTALLATION
The first step of installing a speaker system is a well-thought-out planning. Choose a suitable location
for your speaker components carefully. Please observe the following suggestions to ensure proper
results and best performance:
1. Choose a location which offers none or just a minimum of obstacles between the components and
your ears. Please observe at thereto, the positions of the drivers seat, the headrests and other
constructions of the inside of vehicle interior.
2. Mount the left and right speakers in the same array on each side, which means that they are installed
at the same height and directly across from each other. Do not install one speaker higher, lower, further
forward or further back from the opposite speaker.
3. Always check what’s behind the chosen mounting locations to ensure that there is proper clearance
for the back of the speaker components and avoid obstructions such as window tracks, wire harnesses,
gas tank etc.
4. The best performance will be achieved, when the speakers are securely mounted to a designated
speaker opening in a door panel or a rear speaker shelf. There should be no gaps between the speaker
basket and the mounting surface.
SPEAKER INTERCONNECTION
• Connect the positive terminals (”+”) and the negative terminals (”–”) of the speakers
with the according speaker outputs of the amplifier.
• Use for the interconnection the supplied cables with jacks.
ENGLISH
SPEAKER LEFT SPEAKER RIGHT
TERMINALS FOR THE
AMPLIFIER CONNECTION
LEFT CHANNEL
TERMINALS FOR THE
AMPLIFIER CONNECTION
RIGHT CHANNEL

Specyfikacje produktu

Marka: Crunch
Kategoria: Speaker
Model: DSX462
Wysokość produktu: 89 mm
Szerokość produktu: 14 mm
Głębokość produktu: 144 mm
Impedancja: 4 Ω
Moc znaminowa: 70 W
Typ głośnika: 2-drożny
Dołączony subwoofer: Nie
Kształt: Owalny
Wzmacniacz dołączony: Nie
Moc szczytowa: 140 W
Oddzielne komponenty: Tak
Głębokość mocowania: - mm

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Crunch DSX462, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Speaker Crunch

Instrukcje Speaker

Najnowsze instrukcje dla Speaker