Instrukcja obsługi Crucial DDR3-1600


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Crucial DDR3-1600 (4 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/4
Install Guide
General Memory Module Installation
Equipment needed
• Memory module(s)
• Non-magnetic-tip screwdriver (for removing the cover
on your computer)
• Your system’s owner’s manual
Installation process
1. Make sure that you are working in a static-safe
environment. Remove any plastic bags or papers from
your work space.
2. Shut down your system and make sure the power is
completely off before unplugging the power cable from
your computer. For laptops, then remove the battery.
3. Discharge residual power by pressing the power button.
4. Remove your computer’s cover. Refer to your owner’s
manual for how to do this.
1
2
5. To protect your new memory modules and your
system’s components from static damage during the
installation process, touch any of the unpainted metal
surfaces on your computer’s frame before handling and
installing memory.
6. Using your system’s owner’s manual, locate your
computer’s memory expansion slots. Do not use any
tools in the removal or installation of memory modules.
7. Insert your new memory module(s) in accordance with
the illustrations in this guide. Align the notch(es) on the
module with the notch(es) in the slot, and then press
the module down until the clips on the slot snap into
place. (It can take 20 to 30 pounds of pressure to install
a module.) Fill the memory slots on your computer
starting with the highest density (i.e. put the highest
density module in bank 0).
8. Once the module(s) have been installed, replace the
cover on your computer and reconnect the power cord
or battery. Installation is now complete.
Desktop, server, and printer memory installation (DIMM modules)
Using firm, even pressure, push DIMM into socket until
clips snap into place. Do not assist clips.
Laptop memory installation (SODIMM modules)
Firmly push SODIMM in at 45° angle, and then push down
until clips snap into place.
Helpful hints & troubleshooting tips
If your system does not boot, check the following:
1. If you receive an error message or hear a series of beeps,
your system may not be recognizing the new memory.
Remove and reinstall the modules to ensure they are
securely seated in the sockets.
2. If your system won’t boot, check all of the connections
inside your computer. It is easy to bump a cable and pull it
out of its connector, disabling devices such as your hard
drive or CD-ROM. If your system still won’t reboot, contact
Crucial Technical Support.
3. When restarting your system, you may get a message
prompting you to update the configuration settings. Refer
to your owner’s manual for information. If you are still
unsure, please call Crucial Technical Support for assistance.
4. If you get a memory mismatch message, follow the
prompts to enter the Setup menu, and then select Save
and Exit. (This is not an error—some systems must do this
to update the system settings.)
If you encounter any of the following problems, please
contact Crucial Technical Support:
1. Your module doesn’t seem to fit; do not force it into the
socket.
2. Your system is recognizing only half of the new module’s
memory.
3


Specyfikacje produktu

Marka: Crucial
Kategoria: Niesklasyfikowane
Model: DDR3-1600

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Crucial DDR3-1600, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Niesklasyfikowane Crucial

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

Stihl

Stihl HT 70 Instrukcja

15 Października 2024
Ernesto

Ernesto H14270 Instrukcja

15 Października 2024
Uniden

Uniden BT MIC KIT Instrukcja

15 Października 2024
Vaude

Vaude Omnis Bike 26 Instrukcja

15 Października 2024
ART

ART ProChannel II Instrukcja

15 Października 2024
Aukey

Aukey DR02J Instrukcja

15 Października 2024
Master Lock

Master Lock 653EURD Instrukcja

15 Października 2024
Roland

Roland FR-18 Diatonic Instrukcja

15 Października 2024