Instrukcja obsługi Crown DriveCore Install DCi 4|600N

Crown odbiornik DriveCore Install DCi 4|600N

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Crown DriveCore Install DCi 4|600N (72 stron) w kategorii odbiornik. Ta instrukcja była pomocna dla 11 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/72
Product Registration: Register your new product at http://warranty.harmanpro.com.
Obtaining Other Language Versions: To obtain information in another language about the use of this product, please contact your local Crown Distributor. If you need
assistance locating your local distributor, please contact Crown at 574-294-8000 or visit www.crownaudio.com.
This manual does not include all of the details of design, production, or variations of the equipment. Nor does it cover every possible situation which may arise during
installation, operation or maintenance.
The information provided in this manual was deemed accurate as of the publication date. However, updates to this information may have occurred. To obtain the latest
version of this manual, please visit the Crown website at www.crownaudio.com.
Trademark Notice: Com-Tech, BCA, Crown, Crown Audio, Amcron and Multi-Mode are registered trademarks of Crown International. DriveCore, DriveCore Install,
IQwic, PIP and PIP2 are trademarks of Crown International. Other trademarks are the property of their respective owners.
Some models may be exported under the name Amcron®
© 2016 by HARMAN International®, Inc. 1718 W. Mishawaka Rd., Elkhart, Indiana 46517-9439 U.S.A. Telephone: 574-294-8000
DCi 2|300N
DCi 4|1250N
DCi 2|1250N
DCi 4|2400N
DCi 2|2400N
DCi 4|300N
DCi 8|300N
DCi 2|600N
DCi 4|600N
DCi 8|600N
DCi Series – Network Models
Operation Manual
5040450 - 04/16
DriveCore Install Network Series Power Amplifiers
Operation Manual
page 2
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus that produce heat.
9. Do not defeat the safety purpose of the Grounding-type plug. A
polarized plug has two blades with one wider than the other and
should not be used with this product. A grounding-type plug has two
blades and a third grounding prong and is the proper plug for this
product. The wide blade or the third prong is provided for your safety.
If the provided plug does not fit into your outlet, consult an electrician
for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched, particularly
at plugs, convenience receptacles, and the point where they exit from
the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
13. Unplug this apparatus during lightning storms or when unused for
long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as power-
supply cord or plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been exposed to rain
or moisture, does not operate normally, or has been dropped.
15. Use the mains plug to disconnect the apparatus from the mains.
16. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO
NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.
17. DO NOT EXPOSE THIS EQUIPMENT TO DRIPPING OR SPLASHING
AND ENSURE THAT NO OBJECTS FILLED WITH LIQUIDS, SUCH AS
VASES, ARE PLACED ON THE EQUIPMENT.
18. THE MAINS PLUG OF THE POWER SUPPLY CORD SHALL REMAIN
READILY OPERABLE.
TO PREVENT ELECTRIC SHOCK DO NOT REMOVE TOP COVER. NO
USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
TO COMPLETELY DISCONNECT THIS EQUIPMENT FROM THE
AC MAINS, DISCONNECT THE POWER SUPPLY CORD PLUG FROM THE
AC RECEPTACLE. THE MAINS PLUG OF THE POWER SUPPLY CORD
SHALL REMAIN READILY OPERABLE.
WATCH FOR THESE SYMBOLS:
The lightning bolt triangle is used to alert the user to the risk of electric
shock.
The exclamation point triangle is used to alert the user to important
operating or maintenance instructions.
IMPORTANT
DriveCore Install Series amplifiers require Class 2 output wiring.
MAGNETIC FIELD
CAUTION! Do not locate sensitive high-gain equipment such as
preamplifiers or tape decks directly above or below the unit. Because this
amplifier has a high power density, it has a strong magnetic field which can
induce hum into unshielded devices that are located nearby. The field is
strongest just above and below the unit.
If an equipment rack is used, we recommend locating the amplifier(s) in
the bottom of the rack and the preamplifier or other sensitive equipment at
the top.
Important Safety Instructions
FCC COMPLIANCE NOTICE
This device complies with part 15 of the FCC rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
CAUTION: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment gener-
ates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the follow-
ing measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
DriveCore Install Network Series Power Amplifiers
page 3
Operation Manual
DECLARATION OF CONFORMITY
European Representative’s Name and Address:
HARMAN International
Cranborne Road Potters Bar,
EN6 3JN United Kingdom
Equipment Type: Installed Sound Power Amplifiers
Family Name: DCi
Model Names: DCi 2|300N, DCi 2|600N, DCi 2|1250N, DCi 4|300N, DCi 4|600N, DCi 4|1250N, DCi 8|300N, DCi 8|600N,
DCi 2|2400N, DCi 4|2400N
EMC Standards:
EN 55103-1:2009 +A1:2012 EMC Compatibility – Product Family Standard for Audio, Video, Audio-Visual and
Entertainment Lighting Control Apparatus for Professional Use, Part 1: Emissions
EN 55103-1:2009 +A1:2012 Magnetic Field Emissions – Annex A @ 10cm and 20cm
EN 61000-3-2:2006 +A1:2008 +A2:2009 Limits for Harmonic Current Emissions (equipment input current less than or
equal to 16A
EN 61000-3-3:2013 Limitation of Voltage Fluctuations and Flicker in Low-Voltage Supply systems Rated Current less than
or equal to 16A
EN 55022:2012 Limits and Methods of Measurement of Radio Disturbance Characteristics of ITE: Radiated, Class B Limits;
Conducted, Class A
EN 55103-2:2009 EMC Compatibility – Product Family Standard for Audio, Video, Audio-Visual and Entertainment
Lighting Control Apparatus for Professional Use, Part 2: Immunity
EN 61000-4-2:2009 Ed 9 Electrostatic Discharge Immunity (Environment E2-Criteria B, 4k V Contact, 8k V Air Discharge)
EN 61000-4-3:2010 Ed 3.2 Radiated, Radio-Frequency, EMC Immunity (Environment E2, Criteria A)
EN 61000-4-4:2012 Ed12 Electrical Fast Transient/Burst Immunity (Criteria B)
EN 61000-4-5:2014 Surge Immunity (Criteria B)
EN 61000-4-6:2009 Immunity to Conducted Disturbances Induced by Radio-Frequency Fields (Criteria A)
EN 61000-4-11:2004 Voltage Dips, Short Interruptions and Voltage Variation
Safety Standard:
EN60065:2002 +A12:2011, IEC 60065:2001 Ed 7 +A1:2005 +A2:2010 Safety Requirements – Audio, Video, and
Similar Electronic Apparatus
CAN/CSA 60065-03 incl. A1 Safety Requirements – Audio, Video, and Similar Electronic Apparatus
UL Std No. 60065-2007 Safety Requirements – Audio, Video, and Similar Electronic Apparatus
I certify that the product identified above conforms to the requirements of the EMC Council Directive 2004/108/EC and the Low
Voltage Directive 2006/95/EC.
Issued By: HARMAN International
1718 W. Mishawaka Rd.
Elkhart, IN 46517 U.S.A.
Signed _____________________________
Jeff Denman
Sr. Director of Manufacturing Date of Issue: March 26, 2015
DriveCore Install Network Series Power Amplifiers
Operation Manual
page 4
Important Safety Instructions ............................................................................................................................................................................... 2
Declaration of Conformity .....................................................................................................................................................................................3
Table of Contents ..................................................................................................................................................................................................4
Welcome ............................................................................................................................................................................................................. 5
Installation ..........................................................................................................................................................................................................6
Front & Back Panel Features ................................................................................................................................................................................. 7
Hardware Setup and Configuration ......................................................................................................................................................................9
Precautions 10 ..........................................................................................................................................................................................................
Software Setup ..................................................................................................................................................................................................... 11
Netsetter .............................................................................................................................................................................................................. 12
Offline/Online Operation .......................................................................................................................................................................................18
Set-up and System Configuration .........................................................................................................................................................................20
General Purpose In/Out Control Port .................................................................................................................................................................... 27
Aux Port/Sleep/Amp Status .................................................................................................................................................................................. 32
BLU link ............................................................................................................................................................................................................... 33
Advanced Operation ............................................................................................................................................................................................. 37
Signal Path ........................................................................................................................................................................................................... 48
Per Channel Settings ............................................................................................................................................................................................49
Protection System ................................................................................................................................................................................................ 50
Troubleshooting 51 ...................................................................................................................................................................................................
DCi Specifications ................................................................................................................................................................................................ 53
AC Power Draw and Thermal Dissipation .............................................................................................................................................................. 56
Service 66 .................................................................................................................................................................................................................
Warranty 68 ...............................................................................................................................................................................................................
Factory Service Information .................................................................................................................................................................................. 69
Product Registration ............................................................................................................................................................................................. 71
Table of Contents
DriveCore Install Network Series Power Amplifiers
page 5
Operation Manual
Thank you for purchasing a new Crown DriveCore™ Install Network Series installation amplifier, one in a complete line of high-performance amplifiers based on exclusive
DriveCore technology. DriveCore Install Network Series amplifiers are designed, engineered and manufactured to the industry’s highest quality standards, and provide
system integrators with the advanced features and flexibility required for challenging 21st century installed sound applications. Versatile, compact and highly energy-
efficient, DCi-N Series amplifiers continue the unbroken Crown tradition of leadership in professional and commercial power amplifier technology.
Features
• Exclusive multi-patented DriveCore™ Technology – The patented DriveCore integrated circuit combines hundreds of
discrete circuits into one chip for better performance, lower power consumption and improved reliability.
• BLU link Digital Audio Transport – Up to 256 Channels of digital audio over Category 5e– cabling.
• Configuration in HiQnet Audio Architect™
• Programmable General Purpose Input/Output Control Port
• Digital Signal Processing
Input/Output EQ Filters,
Crossover
Input/Output Delay
LevelMAXTM Limiters
• Priority Input Router
• PFC Power Supply-Universal PFC Power Supply for reduced current draw and provides industry leading efficiency.
• Monitoring and Control over TCP/IP.
• Real time Continuous Loading Monitoring.
• Power Saving Modes – Power consumption in sleep mode is less than 1W.
• Adjustable Auto Standby
• Remote Power Off – Sleep mode activated via AUX port.
• 70Vrms/100Vrms Direct Drive – Each channel individually selectable for low-Z or high-Z operation.
• Advanced Protection Circuits – Amplifier and loads are protected against shorted outputs, DC, mismatched
loads, overheating, over- or under-voltage, and high frequency overload.
• Three Year, No-Fault Transferable Warranty – Your investment is fully protected.
• Complies with GreenEdge™ by HARMAN – Environmentally friendly practices in design, manufacturing, and packaging complement energy-efficient operation.
How to Use This Manual
This manual provides you with the necessary information to safely and correctly setup and operate your Crown product. It does not cover every aspect of installation, setup
or operation that might occur under every condition. For additional information, please contact technical support, your system installer or retailer.
We strongly recommend you read all instructions, warnings and cautions contained in this manual. Also, for your protection, please send in your warranty registration card
today. And save your bill of sale — it’s your official proof of purchase.
Welcome
DriveCore Install Network Series Power Amplifiers
Operation Manual
page 6
Unpacking
Unpack your amplifier and inspect for any damage that may have occurred during transit. If damage is found, notify the shipping company immediately. Only you can
initiate a claim for shipping damage, though Crown will be happy to help as needed. If the product arrived showing signs of damage, save the shipping carton for the
shipper’s inspection.
We also recommend that you save all packing materials for use if you ever need to transport the unit. Never ship the unit without the factory carton and packing materials.
Additional Materials
FOR INSTALLATION, YOU WILL NEED (not supplied):
• Input wiring cables
• Output wiring cables
• Flathead screwdriver
• Phillips screwdriver
• Rack for mounting amplifier (or a stable surface for stacking)
• Category 5e cabling
WARNING: Before you start to set up your amplifier, read and observe the Important
Safety Instructions found at the beginning of this manual.
Install the Amplifier
CAUTION: Before you begin, make sure your amplifier is disconnected from
the power source and that all level controls (see are set to knob Page 7) ∞
Counterclockwise).
All DCi Series amplifiers are 3.5 in. (8.9 cm).high and 19 in. (48.3 cm) wide. All are 14.25
in. (36.2 cm) deep except the DCi8|600N & DCi4|1250N which are 17 in. (43.2 cm) deep,
and the 2|2400N & 4|2400N which are 19 in. (48.3 cm) deep (See Figure 1)
Mount the unit in a standard 19-inch (48.3 cm) equipment rack (EIA RS-310B). You can
also place a single amp on a solid, stable surface or stack multiple amps.
NOTE: Amplifiers should be supported at both the front and rear of the rack.
Ensure Proper Cooling
When using an equipment rack, mount units directly on top of each other. Close any open
spaces in the rack with blank panels. (Open spaces will reduce cooling efficiency.) DO NOT
block front or rear air vents.
The rack should be a minimum of two inches (5.1 cm) away from the amplifier, and the back of
the rack should be a minimum of four inches (10.2 cm) from the amplifier back panel.
Air flow is front to back as illustrated in Figure 2.
Installation
3.5 In.
8.9 cm
14.25 In.
36.2 cm
48.3 cm
19 In.
17 In.
43.2 cm
8|600N and 4|1250N
19 In.
48.3 cm
2|2400N and 4|2400N
Figure 1
Figure 2

Specyfikacje produktu

Marka: Crown
Kategoria: odbiornik
Model: DriveCore Install DCi 4|600N

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Crown DriveCore Install DCi 4|600N, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje odbiornik Crown

Crown

Crown CDi DriveCore 2|300BL Instrukcja

11 Stycznia 2025
Crown

Crown I-Tech 4x3500HD Instrukcja

29 Grudnia 2024
Crown

Crown DCi 8|600 Instrukcja

8 Października 2024
Crown

Crown VRack 12000HD Instrukcja

8 Października 2024
Crown

Crown DCi 2|1250 Instrukcja

8 Października 2024
Crown

Crown VRack 4x3500HD Instrukcja

8 Października 2024
Crown

Crown CT 4150 Instrukcja

28 Września 2024
Crown

Crown CTs 600 Instrukcja

28 Września 2024
Crown

Crown CT 8150 Instrukcja

28 Września 2024
Crown

Crown CTs 8200 Instrukcja

28 Września 2024

Instrukcje odbiornik

Najnowsze instrukcje dla odbiornik

ETON

ETON MA 1 Instrukcja

19 Marca 2025
Elipson

Elipson P1 Instrukcja

14 Marca 2025
Elipson

Elipson Stream S300 Xi Instrukcja

14 Marca 2025
Elipson

Elipson WIIM Mini Instrukcja

14 Marca 2025
KanexPro

KanexPro SP-1X16SL18G Instrukcja

13 Marca 2025
Marshall Electronics

Marshall Electronics VDA-108-3GS Instrukcja

13 Marca 2025
Rega

Rega Brio MK7 Instrukcja

12 Marca 2025
Rexing

Rexing RoadMate CPStream Instrukcja

12 Marca 2025
Mtx Audio

Mtx Audio Thunder TH2500.1 Instrukcja

11 Marca 2025
Mtx Audio

Mtx Audio Thunder TH1500.1 Instrukcja

11 Marca 2025