Instrukcja obsługi Crestron Vector CD1565

Crestron głośnik Vector CD1565

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Crestron Vector CD1565 (6 stron) w kategorii głośnik. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/6
VECTOR CD1565 Series
Vector™ Performance Loudspeaker – Dual 15” Bi-Ampli ed 3-Way Coaxial 60° x 45°
crestron.com | 800.237.2041
>A space-efficient, professional performance loudspeaker for
large indoor spaces
>Dual 15” (381 mm) LF transducers for increased output and
improved pattern control
>Advanced coaxial transducer with 60° x 45° HF horn
>Available with HF horn rotated 90° for horizontal orientation
(model VECTOR CD1565-RH)
>Integrated HF compression driver with 3 inch (76 mm)
titanium diaphragm
>Delivers superior performance in combination with a
Crestron Avia™ DSP
>Precisely tuned for accurate, uncolored sound reproduction
>Produces high intelligibility and natural sound quality for speech
and program material
>Achieves smooth bandwidth performance both within and
beyond the specified coverage pattern
>Uniform directionality affords consistent, targeted pattern control
>Capable of high SPLs without coloration or distortion
>Provides excellent cost-benefit compared to more
conventional designs
>40° trapezoidal enclosure affords a clean, unimposing appearance
>Rugged yet light construction for easy, reliable installation
>Concealed M10 mounting points
>Forged shoulder eyebolts available separately [1]
>Neutrik® speakON® input and pass-through connections
Crestron® Vector™
Performance Loudspeakers provide a professional
sound reinforcement speaker solution for large indoor spaces and venues.
Featuring a revolutionary coaxial transducer design complemented by
advanced Crestron Avia™ digital signal processing, Vector loudspeakers
deliver exceptional intelligibility and natural sound quality for speech
reinforcement, foreground music, and multimedia presentation applications.
Compact, aesthetically-pleasing enclosures afford remarkable performance
in less space. A choice of sizes and coverage patterns is offered to address
the varying applications and room geometries found in auditoriums,
theaters, lecture halls, houses of worship, convention centers, hotel
ballrooms, sports facilities, night clubs, and public spaces.
The Vector CD1565 is a compact, trapezoidal speaker enclosure loaded
with one 2-way coaxial transducer plus a second dedicated low-frequency
transducer. The coaxial transducer is composed of a 15” (381 mm) LF driver
and a 60° x 45° HF horn with 3” (76 mm) diaphragm compression driver.
The second LF transducer is a 15” driver with enhanced low-frequency
performance. Advanced engineering and construction of the complete
speaker achieves a space-efficient design with high output capability and
consistent pattern control.
Its integrated coaxial transducer aligns the low-frequency and high-
frequency elements to produce precise transient response and uniform
directionality across the entire frequency range. The two 15” LF drivers
work together in a bi-amplified configuration to achieve an increase in
overall output and improved low-frequency pattern control.
Note: Specify model VECTOR CD1565-RH for applications requiring
the enclosure to be installed in a horizontal orientation. The VECTOR
CD1565-RH is assembled with its high-frequency horn rotated 90°.
Advanced Coaxial Transducer
The LF/HF transducer in the Vector CD1565 represents a revolutionary
advancement in coaxial speaker design. Its high-frequency horn features
a large 3 inch (76 mm) titanium diaphragm compression driver, which
operates at frequencies lower than typical, allowing the high-frequency
horn to smooth the response of the low frequency section to reduce
shadowing of the woofer by the horn. The woofer’s large radiating surface
works in conjunction with the high-frequency horn to improve directional
control at the lower end of the horn’s frequency range resulting in better
pattern control throughout the critical voice band. The large diaphragm
also allows the compression driver to produce higher sound pressure
levels without distortion to deliver incredibly clear and dynamic sound
quality for both speech and program material.
The complete coaxial transducer assembly employs a single neodymium
magnet with dual-gap geometry, which minimizes the spacing between
the compression driver and woofer voice coils. This integrated approach
virtually eliminates the delay between the two drivers, allowing a passive
crossover to be used to seamlessly blend the horn and woofer into a single
point source. The reduced demand on the internal crossover helps to
maximize efficiency and damping, and the use of a single neodymium
magnet reduces the speaker’s weight, size, and cost.
VECTOR CD1565 Series Vector
™ Performance Loudspeaker – Dual 15” Bi-Ampli ed 3-Way Coaxial 60° x 45°
crestron.com | 800.237.2041
Dual Low-Frequency Drivers
The Vector CD1565 employs an innovative and unconventional bi-amplified
3-way configuration using dual 15” LF transducers. Relative to the coaxial
transducer, the dedicated LF transducer features increased excursion
capability below 100 Hz, with a 4” (102 mm) voice coil and powerful
ceramic magnet for extra output capacity and higher power handling. The
frequency range of both drivers overlaps at precise levels to achieve a flat
summed response, producing a higher overall output level compared to a
more traditional LF/MF/HF 3-way system. The use of dual LF transducers
also provides the benefit of extending usable LF pattern control by over
an octave, reducing acoustic reflections in the room for better clarity
and “projection.”
Crestron Avia™ Digital Signal Processing
Every aspect of the Vector CD1565 is designed to take advantage of
the signal refining abilities of a DSP. Vector loudspeakers Crestron Avia
and Crestron Avia processing work synergistically to produce a superior
speaker system tuned for accurate, uncolored reproduction of voice and
program signals. Precision signal processing is employed to accomplish
what can’t be done physically, strategically eliminating harsh-sounding
resonances caused by horn reflections while retaining every nuance of
the original signal.
Further refinements are employed to maximize transient response and
deliver smooth bandwidth performance both within and beyond the
speaker’s nominal coverage pattern. The result is an extremely natural
sounding speaker system with superior pattern control, improved
intelligibility, reduced listener fatigue, and higher gain before feedback.
Two channels of processing are employed to deliver an optimized signal to
each transducer.
Versatile Installation
The Vector CD1565 is particularly effective in systems where targeted
pattern control is desirable, including front of house, delay fill, and
foreground music applications. Its clean appearance and familiar format
facilitate acceptance by architects and interior designers, and the 40°
trapezoidal angle allows it to be mounted near walls or ceilings without
obstructing sight lines. Concealed M10 mounting points are included to
accommodate forged shoulder eyebolts (sold separately).[1]
Note: Specify model VECTOR CD1565-RH for applications requiring
the enclosure to be installed in a horizontal orientation. The VECTOR
CD1565-RH is assembled with its high-frequency horn rotated 90°.
SPECIFICATIONS
Performance
LF Transducer: 15 inch (381 mm) woofer with 4 inch (102 mm) voice coil
and ceramic magnet
LF/HF Transducers: 15 inch (381 mm) woofer with 3 inch (76 mm) voice
coil, coaxial horn with 3 inch (76 mm) titanium diaphragm compression
driver, single neodymium magnet
Beamwidth: 60° x 45° nominal, available with horn rotated 90° for
horizontal orientation (model VECTOR CD1565-RH)
Impedance: 8 Ohms nominal (per section)
Frequency Range: 42 Hz to 20 kHz (+3/-10 dB)
Power Handling: LF: 700 Watts;
LF/HF: 400 Watts;
Based on the AES power handling of the transducers
Nominal Sensitivity:
LF: 96 dB;
LF/HF: 104 dB;
Measured at 1W/1m whole space using band limited pink noise
without processing
Nominal Maximum SPL:
LF: 132 dB peak, 126 dB continuous, at 700W/1m;
LF/HF: 136 dB peak, 130 dB continuous, at 400W/1m;
Without processing
Equalized Sensitivity: 98 dB at 1W/1m using an EIA-426-B signal
with processing
Equalized Maximum SPL:
LF: 133 dB peak, 127 dB continuous, at 700W/1m;
LF: 133 dB peak, 127 dB continuous, at 400W/1m;
With processing
Processing & Amplification
Digital Signal Processing: Requires processing using two output
channels of a Crestron Avia DSP, settings provided via model-specific
“Speaker Profiles” in the Crestron Avia Audio Tool software (SW-AAT)
Amplification: Bi-amplified, requires two channels of amplification
Recommended Amplifier Power: LF: 700 to 1400 Watts at 8 Ohms;
LF/HF: 400 to 800 Watts at 8 Ohms
Connections
Input: (2) Neutrik NL4 speakON 4-pole chassis connectors;
Pins 1 +/–: LF speaker input and pass-through;
Pins 2 +/–: LF/HF speaker input and pass-through
VECTOR CD1565 Series Vector
™ Performance Loudspeaker – Dual 15” Bi-Ampli ed 3-Way Coaxial 60° x 45°
crestron.com | 800.237.2041
Environmental
For indoor use only
Construction
Enclosure: Void-free, exterior grade Baltic Birch plywood; black
painted finish
Grille: Steel, black powder coat finish
Yoke Mounting: (2) M10 yoke points [1]
Suspension: (12) M10 eyebolt angle points and (1) M10 pull back point
( sold separately)eyebolts
Dimensions
Height: 33.89 in (861 mm)
Width: 20.84 in (529 mm)
Depth: 18.00 in (457 mm)
Weight
89.0 lb (40.4 kg)
MODELS & ACCESSORIES
Available Models
VECTOR CD1565: Vector™ Performance Loudspeaker – Dual 15”
Bi-Amplified 3-Way Coaxial 60° x 45°
VECTOR CD1565-RH: Vector™ Performance Loudspeaker – Dual 15”
Bi-Amplified 3-Way Coaxial 60° x 45°, Rotated Horn
Available Accessories
VECTOR EB10: M10 Forged Shoulder Eyebolt
VECTOR CONN4: Neutrik® NL4 speakON® 4-Pole Cable Connector
DSP Series: Crestron Avia™ Digital Signal Processors
AMP-2800: 2-Channel Power Amplifier, 800W/Ch.
AMP-4600: 4-Channel Power Amplifier, 600W/Ch.
VECTOR SUBS15: Vector™ 15” Performance Subwoofer
VECTOR SUBS18: Vector™ 18” Performance Subwoofer
VECTOR SUBD18: Vector™ Dual 18” Performance Subwoofer
Notes:
This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact
the Crestron sales representative for your area. A list of sales representatives is available online at
https://www.crestron.com/How-To-Buy/Find-a-Representative or by calling 855-263-8754.
The specific patents that cover this and other Crestron products are listed online at
https://www.crestron.com/legal/patents.
Certain Crestron products contain open source software. For specific information, visit
https://www.crestron.com/opensource.
Crestron, the Crestron logo, Crestron Avia, and Vector are either trademarks or registered trade-
marks of Crestron Electronics, Inc. in the United States and/or other countries. Dante is either a
trademark or registered trademark of Audinate Pty Ltd. in the United States and/or other countries.
Neutrik and speakON are either trademarks or registered trademarks of Neutrik AG in the United
States and/or other countries. Other trademarks, registered trademarks, and trade names may
be used in this document to refer to either the entities claiming the marks and names or their
products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron
is not responsible for errors in typography or photography. Specifications are subject to change
without notice. ©2018 Crestron Electronics, Inc.

Specyfikacje produktu

Marka: Crestron
Kategoria: głośnik
Model: Vector CD1565

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Crestron Vector CD1565, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje głośnik Crestron

Crestron

Crestron ULTIMATE IC3-SA-WOOFER Instrukcja

30 Września 2024
Crestron

Crestron ULTIMATE IC3-AW-SA-BOX-WOOFER Instrukcja

30 Września 2024
Crestron

Crestron ULTIMATE IC3-AW-SA-TWEETER Instrukcja

30 Września 2024
Crestron

Crestron ULTIMATE IWS82-AW-W-T-EACH Instrukcja

27 Września 2024
Crestron

Crestron ULTIMATE IWLCR62-W-T-EACH Instrukcja

27 Września 2024
Crestron

Crestron SAROS IC8T-W-T-EACH Instrukcja

26 Września 2024
Crestron

Crestron ULTIMATE ASUB10-B-T-EACH Instrukcja

24 Września 2024
Crestron

Crestron Excite IW6 Instrukcja

23 Września 2024
Crestron

Crestron Essence IW5-W-T Instrukcja

22 Września 2024
Crestron

Crestron SAROS IC6T-W Instrukcja

22 Września 2024

Instrukcje głośnik

Najnowsze instrukcje dla głośnik

Teufel

Teufel Rockster Air Instrukcja

15 Października 2024
Alpine

Alpine PSS-22WRA Instrukcja

15 Października 2024
Bauhn

Bauhn APPS-0724 Instrukcja

15 Października 2024
Aiwa

Aiwa SP-A100 Instrukcja

15 Października 2024
Harman Kardon

Harman Kardon Citation One Instrukcja

14 Października 2024
Alpine

Alpine 30MC Instrukcja

14 Października 2024
Magnat

Magnat Needle 9000 ALU Instrukcja

14 Października 2024
Pioneer

Pioneer SP-T22A-LR Instrukcja

14 Października 2024
Sharp

Sharp PS-932 Instrukcja

14 Października 2024
Pyle

Pyle PDWR64BTW Instrukcja

13 Października 2024