Instrukcja obsługi Crestron PROAMPI-7X250
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Crestron PROAMPI-7X250 (32 stron) w kategorii odbiornik. Ta instrukcja była pomocna dla 12 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/32
Crestron PROAMP(I)-7X250
PROCISE™ High-Definition Professional
Surround Sound Amplifier
Operations Guide
This document was prepared and written by the Technical Documentation department at:
Crestron Electronics, Inc.
15 Volvo Drive
Rockleigh, NJ 07647
1-888-CRESTRON
Important Safety Instructions
•Read these instructions.
•Keep these instructions.
•Heed all warnings.
•Follow all instructions.
•Do not use this apparatus near water.
•Clean only with dry cloth.
•Do not block any ventilation openings. Install in accordance
with the manufacturer's instructions.
•Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers) that
produce heat.
•Do not defeat the safety purpose of the polarized or grounding-
type plug. A polarized plug has two blades with one wider than
the other. A grounding-type plug has two blades and a third
grounding prong. The wide blade or the third prong are
provided for your safety. If the provided plug does not fit into
your outlet, consult an electrician for replacement of the
obsolete outlet.
•Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
•Only use attachments/accessories specified by the
manufacturer.
•Use only with the cart, stand, tripod, bracket or
table specified by the manufacturer or sold with
the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to
avoid injury from tip-over.
•Unplug this apparatus during lightning storms or when unused
for long periods of time.
•Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way,
such as power-supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does not operate
normally, or has been dropped.
•Disconnect power prior to connecting or disconnecting
equipment.
•Do not install in direct sunlight.
•The apparatus must be installed in a way that the power cord
can be removed either from the wall outlet or from the device
itself in order to disconnect the mains power.
•Prevent foreign objects from entering the device.
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated “dangerous voltage” within the
product's enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the
literature accompanying the appliance.
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS APPARATUS TO RAIN OR
MOISTURE. THE APPARATUS SHALL NOT BE
EXPOSED TO DRIPPING OR SPLASHING. OBJECTS
FILLED WITH LIQUIDS, SUCH AS VASES, SHOULD
NOT BE PLACED ON THE APPARATUS.
WARNING:
TO PREVENT ELECTRIC SHOCK, DO NOT REMOVE
COVER. THERE ARE NO USER SERVICEABLE PARTS
INSIDE. ONLY QUALIFIED SERVICE PERSONNEL
SHOULD PERFORM SERVICE.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
AVIS: RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR
WARNING:
THIS IS AN APPARATUS WITH CLASS I
CONSTRUCTION. IT SHALL BE CONNECTED TO AN
ELECTRICAL OUTLET WITH AN EARTHING GROUND
TERMINAL.
IMPORTANT:
The PROAMP-7X250 and PROAMPI-7X250 can be used
with Class 2 output wiring.
Regulatory Compliance
Federal Communications Commission (FCC) Compliance Statement
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
Industry Canada (IC) Compliance Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following conditions:
(1) This device may not cause harmful interference and (2) this device must accept any interference received,
including interference that may cause undesired operation.
CAUTION: Changes or modifications not expressly approved by the manufacturer responsible for compliance
could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna
Increase the separation between the equipment and receiver
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
Consult the dealer or an experienced radio/TV technician for help
As of the date of manufacture, the PROAMP-7X250 and PROAMPI-7X250 have been tested and found to
comply with specifications for CE marking and standards per EMC and Radiocommunications Compliance
Labelling.
All brand names, product names and trademarks are the property of their respective owners.
©2010 Crestron Electronics, Inc.
Specyfikacje produktu
Marka: | Crestron |
Kategoria: | odbiornik |
Model: | PROAMPI-7X250 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Crestron PROAMPI-7X250, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje odbiornik Crestron
4 Czerwca 2024
4 Czerwca 2024
4 Czerwca 2024
4 Czerwca 2024
4 Czerwca 2024
3 Czerwca 2024
3 Czerwca 2024
3 Czerwca 2024
3 Czerwca 2024
3 Czerwca 2024
Instrukcje odbiornik
- odbiornik Yamaha
- odbiornik Pioneer
- odbiornik Plantronics
- odbiornik Technics
- odbiornik Onkyo
- odbiornik Edision
- odbiornik Bose
- odbiornik Zgemma
- odbiornik StarTech.com
- odbiornik Behringer
- odbiornik Medion
- odbiornik Tangent
- odbiornik Boss
- odbiornik Peiying
- odbiornik Jensen
- odbiornik Blaupunkt
- odbiornik Metra
- odbiornik Line 6
- odbiornik Manhattan
- odbiornik Strong
- odbiornik Denon
- odbiornik Block
- odbiornik Phoenix Gold
- odbiornik Audac
- odbiornik Kenwood
- odbiornik NuPrime
- odbiornik Alpine
- odbiornik Focusrite
- odbiornik Auna
- odbiornik Vimar
- odbiornik Renkforce
- odbiornik Audiotec Fischer
- odbiornik Pro-Ject
- odbiornik Pyle
- odbiornik Marantz
- odbiornik Sennheiser
- odbiornik Chord
- odbiornik Fosi Audio
- odbiornik Musical Fidelity
- odbiornik Peavey
- odbiornik ART
- odbiornik NAD
- odbiornik Harman Kardon
- odbiornik Aiwa
- odbiornik JL Audio
- odbiornik AKAI
- odbiornik ICOM
- odbiornik Sunfire
- odbiornik Hifonics
- odbiornik Focal
- odbiornik DBX
- odbiornik Omnitronic
- odbiornik Hama
- odbiornik McIntosh
- odbiornik FSR
- odbiornik Ground Zero
- odbiornik Power Dynamics
- odbiornik Rockford Fosgate
- odbiornik Monacor
- odbiornik KanexPro
- odbiornik Kopul
- odbiornik BZBGear
- odbiornik Rupert Neve Designs
- odbiornik Key Digital
- odbiornik Ram Audio
- odbiornik Whirlwind
- odbiornik Music Hall
- odbiornik Apantac
- odbiornik Sonance
- odbiornik Rotel
- odbiornik Devialet
Najnowsze instrukcje dla odbiornik
10 Lipca 2024
8 Lipca 2024
7 Lipca 2024
30 Czerwca 2024
29 Czerwca 2024
29 Czerwca 2024
29 Czerwca 2024
29 Czerwca 2024
29 Czerwca 2024
29 Czerwca 2024