Instrukcja obsługi Crestron HR-310-BTN

Crestron przełącznik HR-310-BTN

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Crestron HR-310-BTN (2 stron) w kategorii przełącznik. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/2
HR-310-BTN
Engravable Buttons for HR-310
Installation Guide
Product Page Instructional Video
Description
The Crestron® HR-310-BTN BLANK and the HR-310-BTN ENGRAVED are sets of blank and engravable buttons,
respectively, that are designed to replace the default button set installed in an HR-310 or HR-310-I handheld remote
(not included). Each button set contains nine congurable hard buttons. A custom-engraved button frame that
secures the custom button set to the remote is also included with each engraving order.
Customized hard buttons for the HR-310-BTN ENGRAVED can be created and ordered using Crestron Engraver
software. For more information, refer to the Crestron Engraver help le that is packaged with the software.
Installation
Use the following procedure to install the HR-310-BTN in an HR-310 or HR-310-I remote.
NOTE: To view an instructional video showing these steps, visit , or use a QR reader https://vimeo.com/250110905
application on your mobile device to scan the “Instructional Video” QR image located in “Additional Resources.”
1. Align the two pegs on top of the included button removal tool with the two small holes on the rear of the remote
(behind the button cover).
Aligning the Button Removal Tool with the Remote
Additional Resources
Visit the product page on the Crestron website
( ) for additional information and the latest www.crestron.com
rmware updates. An instructional video showing how to
install the HR-310-BTN buttons into an HR-310 or HR-310-I
remote can also be viewed. Use a QR reader application on
your mobile device to scan the QR images, or click the QR
images to load the web pages.
Button cover
HR-310-BTN
button removal
tool
HR-310/HR-310-I
2. Place the button removal tool on a at, level surface. Then, use two ngers to rmly press down on the left and
right buttons in the middle row of removable buttons on the remote until the frame pops up. Refer to the
illustration on the following page.
NOTE: The button cover can be removed only using the button removal tool.
Removing the Button Cover
HR-310/HR-310-I
(top rear view)
Align top pegs on
button removal tool
with these holes
3. Remove the button removal tool from the rear of the remote.
4. Remove the default button set from the button compartment by pulling it up and out of the compartment.
5. Position the HR-310-BTN replacement button set so that the tabs on top and bottom of the button set align
with the slots on the top and bottom of the button compartment, and then place the button set into the
compartment, bottom side rst. Refer to the following illustration.
Installing the Replacement Button Set in the Remote
Engraved button cover
HR-310-BTN
button set
Button compartment
6. Attach the custom-engraved button cover so that the tab on the bottom of the cover enters the slot on the
bottom of the button compartment. Then, gently press the top of the cover down into the remote until the cover
is secured.
Attaching the Engraved Button Cover to the Remote
Removing the Button Cover - Button Press Locations
1 2 3
454 6
7 8 9
0ENTER
x
Press the left and
right buttons in the
middle row rmly
until the cover pops up
Top slots in remote (2)
Bottom slots in remote (2) Bottom tabs on button set (2)
Top tabs on button set (2)
As of the date of manufacture, the product has been tested
and found to comply with specifications for CE marking.
Product warranty can be found at
www.crestron.com/warranty.
The specic patents that cover Crestron products are listed at
www.crestron.com/legal/patents.
Certain Crestron products contain open source software. For
www.crestron.com/opensource.
Crestron and the Crestron logo are either trademarks or
registered trademarks of Crestron Electronics, Inc. in the
United States and/or other countries.
Other trademarks, registered trademarks, and trade names
may be used in this document to refer to either the entities
claiming the marks and names or their products. Crestron
disclaims any proprietary interest in the marks and names of
others. Crestron is not responsible for errors in typography or
photography.
This document was written by the Technical Publications
department at Crestron.
©2018 Crestron Electronics, Inc.
Crestron Electronics, Inc. Installation Guide
15 Volvo Drive DOC. 8224D
Rockleigh, NJ 07647 (2049461)
Tel: 888.CRESTRON 01.18
Fax: 201.767.7576 Specications subject to
www.crestron.com change without notice.

Specyfikacje produktu

Marka: Crestron
Kategoria: przełącznik
Model: HR-310-BTN

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Crestron HR-310-BTN, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje przełącznik Crestron

Crestron

Crestron HD-MD2X1-8K Instrukcja

8 Października 2024
Crestron

Crestron HD-MD6X2-4K-E Instrukcja

7 Października 2024
Crestron

Crestron GLXP-SW16 Instrukcja

4 Października 2024
Crestron

Crestron GLXP-SW10 Instrukcja

4 Października 2024
Crestron

Crestron DM-MD8X8-CPU3-RPS Instrukcja

3 Października 2024
Crestron

Crestron HD-MD4X1-4KZ-E Instrukcja

3 Października 2024
Crestron

Crestron HD-PS402 Instrukcja

3 Października 2024
Crestron

Crestron DM-MD16X16-CPU3-RPS Instrukcja

3 Października 2024
Crestron

Crestron HD-PS401 Instrukcja

3 Października 2024
Crestron

Crestron HD-MD8X8-4KZ-E Instrukcja

3 Października 2024

Instrukcje przełącznik

Najnowsze instrukcje dla przełącznik

Powerfix

Powerfix PSSS 2 A1 Instrukcja

14 Stycznia 2025
INOGENI

INOGENI CAM230 Instrukcja

14 Stycznia 2025
Schneider

Schneider CCT15225 Instrukcja

14 Stycznia 2025
Luxul

Luxul XMS-5248P Instrukcja

14 Stycznia 2025
Luxul

Luxul AMS-2624P Instrukcja

14 Stycznia 2025
Luxul

Luxul XGS-1005 Instrukcja

14 Stycznia 2025
Luxul

Luxul AGS-1008M Instrukcja

14 Stycznia 2025
Luxul

Luxul XMS-1208P Instrukcja

14 Stycznia 2025
Luxul

Luxul XMS-7048P Instrukcja

14 Stycznia 2025
Luxul

Luxul AMS-2600 Instrukcja

14 Stycznia 2025