Instrukcja obsługi Crestron DM-TX-200-2G

Crestron przedłużacz AV DM-TX-200-2G

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Crestron DM-TX-200-2G (44 stron) w kategorii przedłużacz AV. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/44

Crestron DM-TX-200-2G/400-3G

Wall Plate DigitalMedia™ CAT

Transmitters

Operations & Installation Guide

This document was prepared and written by the Technical Documentation department at:

Crestron Electronics, Inc.

15 Volvo Drive

Rockleigh, NJ 07647

1-888-CRESTRON

Regulatory Compliance

Federal Communications Commission (FCC) Compliance Statement

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

Industry Canada (IC) Compliance Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following conditions:

(1) This device may not cause harmful interference and (2) this device must accept any interference received,

including interference that may cause undesired operation.

CAUTION: Changes or modifications not expressly approved by the manufacturer responsible for compliance

could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy

and, if not installed and used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the

following measures:

Reorient or relocate the receiving antenna

Increase the separation between the equipment and receiver

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected

Consult the dealer or an experienced radio/TV technician for help

As of the date of manufacture, the DM-TX-200-2G and DM-TX-400-3G have been tested and found to comply

with specifications for CE marking and standards per EMC and Radiocommunications Compliance Labelling.

This device includes an aggregation of separate independent works that are each generally copyrighted by Crestron Electronics, Inc., with all rights

reserved. One of those independent works, Linux Bridge Project, is copyrighted under the GNU GENERAL PUBLIC LICENSE, Version2,

reproduced in “GNU General Public License” on page 37, where the corresponding source code is available at: ftp://ftp.crestron.com/gpl.

All brand names, product names and trademarks are the property of their respective owners.

Crestron DM-TX-200-2G/400-3G Wall Plate DigitalMedia™ CAT Transmitters

Contents

Wall Plate DigitalMedia™ CAT Transmitter 200/400:

DM-TX-200-2G/400-3G 1

Introduction ...............................................................................................................................1

Features and Functions................................................................................................1

Applications.................................................................................................................4

Specifications ..............................................................................................................5

Physical Description....................................................................................................9

Setup ........................................................................................................................................ 16

Network Wiring.........................................................................................................16

Identity Code ............................................................................................................. 16

Auto-Detect Switching .............................................................................................. 17

Supplied Hardware....................................................................................................17

Installation ................................................................................................................. 18

Hardware Hookup .....................................................................................................23

Programming Software............................................................................................................ 26

Earliest Version Software Requirements for the PC ................................................. 26

Programming with Crestron SystemBuilder.............................................................. 26

Programming with SIMPL Windows........................................................................ 26

Uploading and Upgrading........................................................................................................ 29

Establishing Communication.....................................................................................29

Firmware ................................................................................................................... 31

IP Configuration........................................................................................................ 32

DMTool..................................................................................................................... 32

Problem Solving ......................................................................................................................33

Troubleshooting......................................................................................................... 33

Check Network Wiring..............................................................................................34

Reference Documents................................................................................................ 35

Further Inquiries ........................................................................................................ 35

Future Updates ..........................................................................................................35

Return and Warranty Policies .................................................................................................. 36

Merchandise Returns / Repair Service ......................................................................36

CRESTRON Limited Warranty.................................................................................36

GNU General Public License ..................................................................................................37

Operations & Installation Guide – DOC. 6949B Contents •

•

•• i

Specyfikacje produktu

Marka:	Crestron
Kategoria:	przedłużacz AV
Model:	DM-TX-200-2G
Kolor produktu:	Czarny
Wysokość produktu:	105 mm
Szerokość produktu:	89 mm
Głębokość produktu:	64 mm
Waga produktu:	285 g
Technologia łączności:	Przewodowa
Ilość portów USB:	1
Zakres temperatur (eksploatacja):	0 - 40 °C
Zakres wilgotności względnej:	10 - 90 %
Pobór mocy:	10 W
Model:	Nadajnik AV
Maks. rozdzielczość:	2048 x 1152 px
Materiały:	Metal
Maksymalny dystans transferu:	137 m
HDMI in:	1
Wejśćie 3,5 mm:	Tak
Wejścia VGA (D-Sub):	1