Instrukcja obsługi Crestron DIN-AP3MEX

Crestron nieskategoryzowany DIN-AP3MEX

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Crestron DIN-AP3MEX (36 stron) w kategorii nieskategoryzowany. Ta instrukcja była pomocna dla 16 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/36
Crestron DIN-AP3MEX
DIN Rail 3-Series® Automation
Processor with infiNET EX®
Operations & Installation Guide
Regulatory Compliance
This product is Listed to applicable UL Standards and requirements by Underwriters Laboratories Inc.
As of the date of manufacture, the DIN- AP3MEX has been tested and found to comply with specifications
for CE marking and standards per EMC and Radiocommunications Compliance Labelling.
Federal Communications Commission (FCC) Compliance Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following conditions:
(1) This device may not cause harmful interference and (2) this device must accept any interference received,
including interference that may cause undesired operation.
CAUTION: Changes or modifications not expressly approved by the manufacturer responsible for
compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
• Consult the dealer or an experienced radio/TV technician for help
The specific patents that cover Crestron products are listed at patents.crestron.com.
Crestron, the Crestron logo, Crestron Fusion, 3- 3-Series, Series Control System, Cresnet, Crestron Control, Crestron
Green Light, Crestron Mobile Pro, Crestron Studio, Crestron Toolbox, e-Control, Fusion EM, Fusion RV, infiNET EX,
RoomView, and Smart Graphics are either trademarks or registered trademarks of Crestron Electronics, Inc. in the
United States and/or other countries. BACnet is either a trademark or registered trademark of American Society of
Heating, Refigeration and Air-Conditioning Engineers, Inc. in the United States and/or other countries. Apple, iPad, and
iPhone are either trademarks or registered trademarks of Apple Inc. in the United States and/or other countries. IOS is
either a trademark or registered trademark of Cisco Technology, Inc. in the United States and/or other countries. Android
is either a trademark or registered trademark of Google, Inc. in the United States and/or other countries. Microsoft,
Internet Explorer, and Windows are either trademarks or registered trademarks of Microsoft Corporation in the United
States and/or other countries. Samsung Smart TV is either a trademark or registered trademark of Samsung Electronics
Co., Ltd. In the United Stated and/or other countries. SD and SDHC are or registered trademarkeither trademark s s of
SD-3C, LLC in the United States and/or other countries. UL and the UL logo are either trademarks or registered
trademarks of Underwriters Laboratories, Inc. in the United States and/or other countries. Other trademarks, registered
trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or
their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible
for errors in typography or photography.
This document was written by the Technical Publications department at Crestron.
©2013 Crestron Electronics, Inc.
Regulatory Compliance (Continued)
Industry Canada (IC) Compliance Statement
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the
following two conditions: (1) this device may not cause interference, and (2) this device must accept any
interference, including interference that may cause undesired operation of the device.
Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and
maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio
interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically
radiated power (e.i.r.p.) is not more than that necessary for successful communication.
This radio transmitter, IC: 5683C-CWD6660, has been approved by Industry Canada to operate with the
antenna types listed below with the maximum permissible gain and required antenna impedance for each
antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum gain
indicated for that type, are strictly prohibited for use with this device.
Antenna Type: Dipole, Maximum permissible antenna gain: 2.5 dBi, Impedance: 50 Ohms
Industrie Canada (IC) Déclaration de conformité
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de
licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de
brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d'en compromettre le fonctionnement.
Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut fonctionner avec une
antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour l'émetteur par Industrie Canada. Dans le
but de réduire les risques de brouillage radioélectrique à l'intention des autres utilisateurs, il faut choisir le
type d'antenne et son gain de sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas
l'intensité nécessaire à l'établissement d'une communication satisfaisante.
Le présent émetteur radio , IC: 5683C-CWD6660, a été approuvé par Industrie Canada pour fonctionner avec
les types d'antenne énumérés ci dessous et ayant un gain admissible maximal et l'impédance requise pour -
chaque type d'antenne. Les types d'antenne non inclus dans cette liste, ou dont le gain est supérieur au gain
maximal indiqué, sont strictement interdits pour l'exploitation de l'émetteur.
Type d'antenne: Dipole, Gain admissible maximal: 2.5 dBi, Impédance: 50 Ohms
To satisfy RF exposure requirements, this device and its antenna must operate with a separation distance of
at least 20 centimeters from all persons and must not be colocated or operating in conjunction with any other
antenna or transmitter.

Specyfikacje produktu

Marka: Crestron
Kategoria: nieskategoryzowany
Model: DIN-AP3MEX

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Crestron DIN-AP3MEX, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje nieskategoryzowany Crestron

Crestron

Crestron RFID-USB Instrukcja

16 Września 2024
Crestron

Crestron CSA-DSK-HDWR-QMT5 Instrukcja

4 Czerwca 2024
Crestron

Crestron CSA-DSK-HDWR-QMT3 Instrukcja

4 Czerwca 2024
Crestron

Crestron UCA-SMK-UC2 Instrukcja

4 Czerwca 2024
Crestron

Crestron TSS-1070-B-S-LB KIT Instrukcja

4 Czerwca 2024
Crestron

Crestron PSPHD Instrukcja

4 Czerwca 2024
Crestron

Crestron DM-DGE-200-C Instrukcja

4 Czerwca 2024
Crestron

Crestron TSW-1060 Instrukcja

4 Czerwca 2024
Crestron

Crestron PROCISE PSPHD Instrukcja

4 Czerwca 2024
Crestron

Crestron TSR-302 Instrukcja

4 Czerwca 2024

Instrukcje nieskategoryzowany

Najnowsze instrukcje dla nieskategoryzowany

Asko

Asko DBI644MIB.S.TW/1 Instrukcja

28 Października 2024
Asko

Asko DFS233IB.S.TW/1 Instrukcja

28 Października 2024
Emko

Emko EZM-9920 Instrukcja

27 Października 2024
Emko

Emko ESM-3712-H Instrukcja

27 Października 2024
Emko

Emko ATS-10 Instrukcja

27 Października 2024
Emko

Emko EAOM-11.2 Instrukcja

27 Października 2024
Emko

Emko EPM-3790 Instrukcja

27 Października 2024
Emko

Emko EPM-7790 Instrukcja

27 Października 2024
Livarno Lux

Livarno Lux IAN 108340 Instrukcja

27 Października 2024
Livarno Lux

Livarno Lux HG06009A-BS Instrukcja

27 Października 2024