Instrukcja obsługi Cresta DTX600

Cresta Stacja pogodowa DTX600

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Cresta DTX600 (11 stron) w kategorii Stacja pogodowa. Ta instrukcja była pomocna dla 11 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/11
DTX600 WEATHERSTATION USER MANUAL
Thank you for purchasing this device, Please read the operating instructions carefully to
familarize yourself with the features and modes of operation before using the instrument.
Package Contents
Carefully unpack and remove the contents:
•1x weather station main unit
•1x stainless steel mast
•1x thermo-hygro sensor
•1x rain sensor
•1x wind speed sensor
•1x wind direction sensor
•Mounting screws
•Stainless steel accessory for fixing the mast and screws.
Technical Details
•Six keys: MODE, +, -, ALARM, ALERT,SNOOZE/LIGHT
•Radio controlled clock
•Automatic receiving of time signal DCF77 to display exactest time
•Automatically switches to/from daylight saving time (summer/winter time)
•Time display in 12/24 format
•+/-12 total 24 adjustable time zones
•Continuous perpetual calendar up to 2099
•Display of D , Month Day of weekate and
•Day of week display available in 7 languages, i.e. German, English, Italian, French, Dutch
Spanish,Danish.
•Dual alarm with snooze function (5 minutes alarm interruption)
•5 weather forecast: sunny, partly sunny, cloudy, rainy, storm .
•Barometer and bar of 12 hours history for air pressureand data
•Indoor /outdoor temperature and humidity with trend
•Max./min. of temperature and humidity
•Thermometer measuring range inside:°C to +50 °C , outside -20 ~60°C °C
•Temperature display elective in °C or °F
•Temperature alert for indoor and outdoor
•Living space humidity
•Moon phase
•Wind speed in mph /kmh wind speed 0~256kmh，
•Wind direction in 16 directions
•Rainfall in mm and inch and display of 1hour, 24hour, TOTAL.
Rain volum 0~999.9MM：（ ）
•·Low battery indication
•B ackground illumination LED.lue b
•Main unit b 2 x AA, LRatteries: 06, 1.5V
Outdoor sensor:
•Frequency: 433 MHz
•Transmission range: 100 meters in open area.
** Actual distance may be varied depending upon the enviroment, it will be shortened if with
interference ,such as concrete wall etc.
•Batter : 2 x AA, LRies 06 1.5V
Installation
•Installing the Batteries
•Open the main unit battery cover located at the back of the unit and insert 2XAA batteries
into the battery compartment and close the battery cover.
•Pull away the shower proof casing of the thermo-hrgro sensor to reveal the 2 sockets.( for
the wind sensor and rain sensor )
•Connect the attached cables 1.cable from wind speed sensor insert into the socket of wind
direction sensor 2. cable from wind direction and cable from rain sensors to the
corresponding sockets of the thermo-hygro sensor by clicking them into place. Make sure
that rain and wind cables are connected to the correct sockets.
NOTES:
•First insert the batteries of main unit, then insert the batteries of the outdoor sensor in 3
minutes after the main unit is powered on, to assure of the sensor data received well.
In case of the outdoor sensor data received failure, pls press key for more than 3 ALARM
seconds to synchronize the RF signal.
•Every time the batteries are replaced , the main unit will loose all the weather data.
•
•Every time the batteries are replaced , the thermo-hygro sensor will sychronize with the main
Unit again.you must press the key for more than 3 seconds to synchronize the RF ALARM
signal.
•In case of any failure of RF, pls reset the sensor to and press receive again.ALARM
•Mounting the main unit
The main unit can be placed onto any flat surface or wall mounted at the desired location by
Hanging hole, It is important to check that the radio signal can be received before mounting.
•Mounting the outdoor sensor onto the stainless steel mast
For accurate results, the outdoor sensor mast should be securely mounted onto a horizontal
surface and in an open area away from trees and other coverings where rainfall or wind
speed may be reduced causing inaccurate reading.
1. Mounting the wind speed sensor to the first plastic bracket：first check the wind-fan
can rotate freely before fixing . The wind speed sensor should now be mounted onto the
bracket provided to allow the wind to travel around the sensor unhindered from all
directions.please follow the below display :
2. : first check the wind Mounting the wind direction sensor to the first plastic bracket
direction sensor before fixing,there is one cable from wind speed sensor, please insert it
into the socket under the wind direction sensor.please follow the below display:

Specyfikacje produktu

Marka: Cresta
Kategoria: Stacja pogodowa
Model: DTX600

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Cresta DTX600, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Stacja pogodowa Cresta

Cresta

Cresta WX580M Instrukcja

5 Października 2024
Cresta

Cresta DSX100 Instrukcja

2 Października 2024
Cresta

Cresta WXR-815 Instrukcja

29 Września 2024
Cresta

Cresta DTX320 Instrukcja

19 Września 2024
Cresta

Cresta BAR700 Instrukcja

27 Sierpnia 2024
Cresta

Cresta DTX510 Instrukcja

14 Sierpnia 2024
Cresta

Cresta BAR918 Instrukcja

14 Sierpnia 2024
Cresta

Cresta TE653EL Instrukcja

7 Sierpnia 2024
Cresta

Cresta DTX600 Instrukcja

6 Sierpnia 2024
Cresta

Cresta DTX 370 Instrukcja

5 Lipca 2024

Instrukcje Stacja pogodowa

Najnowsze instrukcje dla Stacja pogodowa

Hyundai

Hyundai WSP 3080 Instrukcja

15 Października 2024
Livoo

Livoo SL262 Instrukcja

9 Października 2024
Muse

Muse M-085 WS Instrukcja

8 Października 2024
La Crosse Technology

La Crosse Technology S77925v3 Instrukcja

8 Października 2024
TFA

TFA 30.5045.54 Instrukcja

8 Października 2024
La Crosse Technology

La Crosse Technology V61 Instrukcja

8 Października 2024
Davis

Davis DAV-6520 Instrukcja

7 Października 2024
Brandson

Brandson 304633 Instrukcja

7 Października 2024
Brandson

Brandson 305385 Instrukcja

7 Października 2024
GlobalTronics

GlobalTronics WT-440 Instrukcja

6 Października 2024