Instrukcja obsługi Conceptronic ZEUS05E

Conceptronic Niesklasyfikowane ZEUS05E

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Conceptronic ZEUS05E (25 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 11 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/25
Multi Language Quick Guide
Oce UPS
ZEUS 05E
English
Conceptronic UPS
1. Package contents
The following items are present in the package of the Conceptronic UPS:
•UPS
•Multi language quick installation guide
2. Specications
Capacity : 650VA 360W
3 Product overview.
1. Power On/O Switch
2. LED Indicators
3. Battery Backup & Surge
Protected Outlets
Provide battery backup and surge
protection. They ensure power is
provided to connected equipment
over a period of time during a
power failure.
4. Surge Protected Outlets
Provide surge protection for
bypass output.
5. Input power cord
6 Modem/LAN Internet Protection (RJ45&RJ11).
Communication protection ports will protect any standard modem, fax, telephone line,
or network cable .
7. Input Circuit Breaker
The Circuit Breaker provides optimal overload protection.
Denitions for illuminated led indicators
LED
Alarm
Condition
On
Off
o
Flash
Beep 1 time In every
30 ecs
Utility Failure - The UPS is providing
battery power to outlets.
Flash
Beep 1 time In every
2 ecs
Utility Failure - The UPS is providing
battery power. The rapid beeps indicate
the battery will run out of power shortly.
On/Flash
Beep 1 time In every
0.5 s ec
Overload - Occurs when connected
equipment exceeds the rating of the unit.
Turn the UPS o and unplug at least one
piece of equipment from the UPS.
English
4 Installation & usage.
How to determine the power requirements of your equipment
1. Make sure that the total Volt-Amp (VA) requirements of your computer, monitor, and
peripheral equipment does not exceed rated capacity.
2. Ensure that the equipment plugged into the battery power-supplied/surge outlets
does not exceed the UPS unit's rated capacity. If the rated unit capacities are
exceeded, an overload condition may occur and cause the UPS unit to shut down or
the circuit breaker to trip.
Hardware installation guide
1. Your new UPS may be used immediately upon receipt. However, recharging the
battery for at least 8 hours is recommended to ensure that the battery's maximum
charge capacity is achieved. Charge loss may occur during shipping and storage. To
recharge the battery, simply leave the unit plugged into an AC outlet. The unit will
charge in both the on and o position.
2. With the UPS unit o and unplugged, connect the computer, monitor, and any
externally powered data storage device (Zip drive, Jazz drive, Tape drive), etc. into the
battery power supplied outlets. DO NOT plug a laser printer, copier, space heater,
vacuum, paper shredder or other large electrical device into the battery power supplied
outlets. The power demands of these devices will overload and possibly damage the
unit.
3. Plug the UPS into a 2 pole, 3 wire grounded receptacle (wall outlet). Make sure the
wall branch outlet is protected by a fuse or circuit breaker and does not service
equipment with large electrical demands (e.g. air conditioner, refrigerator, copier, etc.
Avoid using extension cords.
4. Press the power switch to turn the unit on. The power on indicator light will illuminate
and the unit will "beep".
5. If an overload is detected, an audible alarm will sound and the unit will emit one long
beep. To correct this, turn the UPS o and unplug at least one piece of equipment from
the battery power supplied outlets. Wait 10 seconds. Make sure the circuit breaker /
fuse is normal and then turns the UPS on.
6. Your UPS is equipped with an auto-charge feature. When the UPS is plugged into
an AC outlet, the battery will automatically recharge.
7. To maintain optimal battery charge, leave the UPS plugged into an AC outlet at all
times.

Specyfikacje produktu

Marka: Conceptronic
Kategoria: Niesklasyfikowane
Model: ZEUS05E

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Conceptronic ZEUS05E, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Niesklasyfikowane Conceptronic

Conceptronic

Conceptronic EMRICK06G Instrukcja

8 Października 2024
Conceptronic

Conceptronic EMRICK07G Instrukcja

8 Października 2024
Conceptronic

Conceptronic EMRICK08G Instrukcja

8 Października 2024
Conceptronic

Conceptronic EMRICK09G Instrukcja

8 Października 2024
Conceptronic

Conceptronic DANTE03T Instrukcja

8 Października 2024
Conceptronic

Conceptronic ORAZIO02 Instrukcja

4 Października 2024
Conceptronic

Conceptronic ZEUS04EP Instrukcja

4 Października 2024
Conceptronic

Conceptronic DJEBBEL01B Instrukcja

3 Października 2024
Conceptronic

Conceptronic DARAY01W Instrukcja

3 Października 2024
Conceptronic

Conceptronic DJEBBEL02B Instrukcja

3 Października 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

GBC

GBC ThermaBind T500Pro Instrukcja

15 Stycznia 2025
Da-Lite

Da-Lite Parallax 29850 Instrukcja

15 Stycznia 2025
Crivit

Crivit IAN 290909 Instrukcja

15 Stycznia 2025
Tripp Lite

Tripp Lite SmartRack SRW12US Instrukcja

15 Stycznia 2025
Powerfix

Powerfix IAN 280221 Instrukcja

15 Stycznia 2025
AGM

AGM Rattler TC35-640 Instrukcja

15 Stycznia 2025
AGM

AGM Wolf-7 Pro Instrukcja

15 Stycznia 2025
AGM

AGM Anaconda TC50-640 Instrukcja

15 Stycznia 2025
AGM

AGM Secutor Pro TS50-640 Instrukcja

15 Stycznia 2025
Microchip

Microchip AT91SAM9M11 Instrukcja

15 Stycznia 2025