Instrukcja obsługi Cocraft KCM22B
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Cocraft KCM22B (88 stron) w kategorii piła. Ta instrukcja była pomocna dla 10 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/88
Important:
Read the entire instruction manual
carefully and make sure that you fully
understand it before you use the
equipment. Keep the manual for future
reference.
Viktig information:
Läs hela bruksanvisningen noggrant och
försäkra dig om att du har förstått den
innan du använder utrustningen. Spara
bruksanvisningen för framtida bruk.
Viktig informasjon:
Les disse anvisningene nøye og forsikre
deg om at du forstår dem, før du tar
produktet i bruk. Ta vare på anvisningene
for seinere bruk.
Tärkeää tietoa:
Lue nämä ohjeet huolellisesti ja varmista
että olet ymmärtänyt ne, ennen kuin
alat käyttää laitetta. Säilytä ohjeet
myöhempää tarvetta varten.
Wichtiger Hinweis:
Vor Inbetriebnahme die komplette
Bedienungsanleitung sorgfältig
durchlesen und aufbewahren.
Ver. 20190109
Original instructions
Bruksanvisning i original
Originalbruksanvisning
Alkuperäinen käyttöohje
Original Bedienungsanleitung
Art.no Model
31-9034 WLCS38A-375
HC 3800
37 cm3
31-9034
CHAINSAW
MOTORSÅG MOTORSAG
MOOTTORISAHA MOTORSÄGE
ENGLISHSVENSKANORSKSUOMIDEUTSCH
2
ENGLISH
Chainsaw
Art.no 31-9034 Model WLCS38A-375
Please read theentire instruction manual before using theproduct and then save it for future reference.
We reserve theright for any errors in text or images and any necessary changes made to technicaldata.
In theevent of technical problems or other queries, please contact our Customer Services (see address details on theback).
Safety
Warning: Readall safety information, warnings and instructions. Failure to read safety information,
warnings and instructions can lead to fire, property damage or serious personal injury.
Persons (including children) whose physical, sensory or mental capability or lack of experience and knowledge means that
they cannot use thesaw in asafe way must not use it without supervision or instruction. Children shall be supervised to
ensure that they do not play with thesaw.
1) Work area safety
a) Cluttered and poorly lit areas invite accidents. Rags, clothing, cables, Keep thework area clean and well illuminated.
gloves or other materials must not be left in theworkarea.
b) Do not use thesaw in explosive environments, such as in thepresence of flammable liquids, gases ordust.
Thesaw can create sparks which may ignite dust orfumes.
c) Keep children and bystanders away from thearea when you are using thesaw. Distractions can cause you to lose control.
2) Personal safety
a) Pay attention to what you are doing and use common sense when using thesaw. Neveruse thesaw if you are tired
or under theinfluence of drugs, alcohol or medication. Onemoment of inattention while using achainsaw may result in
serious injury.
b) Wear protective clothing. Always wear safety glasses. Usingprotective clothing such as dust masks, non-slip safety
shoes, helmets and ear defenders reduces therisk of injury.
c) Remove all service tools/keys before starting thechainsaw. Aspanner or other tool which has been left on arotating
part of thesaw could result in aninjury.
d) Do not overreach. Keepproper footing and balance at alltimes. This will allow you to have better control of thesaw
in unexpected situations.
e) Wear suitable clothing. Donot wear loose-fitting clothing or jewellery. Keephair, clothes and gloves away from
movingparts. Loose-fitting clothes, jewellery or long hair could become caught in movingparts.
3) Use and maintenance of thesaw
a) Do not force thesaw. Makesure that thesaw is designed for thework you are about to perform. Thesaw must only be
used as described in this instruction manual.
b) Do not use thesaw if thepower switch is not functioning properly. Anysaw that cannot be controlled by thepower
switch is dangerous and must be repaired.
c) Store chainsaws that are not being used out of children’sreach. Donot allow people who are unfamiliar
with chainsaws or these instructions to operatethem. Chainsaws can be dangerous if they fall into thehands of
inexperiencedusers.
d) Properly maintain thesaw. Checkfor misalignment, binding of moving parts, broken parts or anything else which
might affect theoperation of thesaw. Ifany damage is noticed, have thesaw repaired beforeusing. Manyaccidents are
caused by poorly maintainedsaws.
e) Properly maintained chains with sharp edges are easier to control.Keep thechain sharp andclean.
f) Use thesaw, and any accessories in accordance with these instructions, taking into account theworking conditions
and thework to be performed. Useof thesaw for apurpose other than that for which it is intended could result in
adangerous situation.
• Keep all parts of your body away from thesaw chain once thesaw has been started. Before starting thesaw,
check that thesaw chain is not in contact with any objects and can run freely. Evenabrief moment of inattention
can lead to thesaw chain fastening in anitem of clothing or abodypart.
• Always hold thesaw with your right hand on therear handle and your left hand on thefront handle. Neverhold
thesaw in any other way, it increases therisk of personal injury.
3
ENGLISH
• Use protective eyewear and hearing protection. Protective equipment for hands, head, legs and feet are also
recommended. Wearing thecorrect type of safety clothing reduces therisk of personal injury from thesaw chain or
ying debris from thesawing.
• Never climb atree to operate thechainsaw. Usingachainsaw in atree can result in personal injury.
• Make sure that you stand on arm, level surface when you use thesaw. Slippery and unstable platforms such as
ladders can result in aloss of balance and loss of control over thesaw.
• Be prepared for branches under tension to spring back during thesawing process. Whenthetension in branches
isreleased they can spring back and strike chainsaw operators causing them to lose control of theirsaws.
• Be very careful when cutting brush and saplings. Thintwigs can get caught in thesaw chain and be projected
towards you or cause you to lose your balance.
• Always carry thechainsaw by thefront handle with theguide bar pointing away from yourbody. Thescabbard
must always be tted when thechainsaw is being transported or stored. Usingthechainsaw correctly will reduce
thelikelihood of contact with thesaw chain when it is in motion.
• Follow theinstructions regarding lubrication, chain tensioning and changing of accessories. Animproperly
tensioned or lubricated chain increases therisk of chain breakage or kickback.
• Always keep thehandles dry, clean and free of oil and grease. Slippery handles covered in oil can cause you to lose
control over thesaw.
• Cut woodonly. Thesaw is not designed for sawing plastic, hardboard or other building materials not made
ofwood. Usingthesaw to saw amaterial it was not designed to saw could lead to adangerous situation.
Causes and prevention of kickback
Kickback can occur when thetip of theguide bar contacts anobject or if thesaw cut closes and traps thechain.
If thetip of theguide bar touches anobject it can cause areaction which throws theguide bar back up towards theoperator.
Pinching thesaw chain along thetop of theguide bar may push theguide bar rapidly back towards theoperator.
All of these reactions may cause you to lose control of thesaw which could result in serious personal injury.
Do not rely solely on thesafety features tted to thesaw. Whenusing thesaw you yourself must take precautions to prevent
accidents and injuries. Kickback is caused either by poor maintenance, anincorrect sawing method or using thesaw for
thewrong purpose. Thiscan be avoided by following thefollowing safety precautions:
• If you understand what causes kickback therisk of being surprised and losing control will be reduced.
• Hold thesaw rmly with bothhands. Holdthesaw with your right hand on therear handle and your left hand on
thefront handle. Maintain arm grip with thumbs and ngers encircling thehandles and your arms and body
positioned in such away that you can resist kickback forces should they occur. You can control theforces arising
from akickback if thecorrect precautions aretaken. Neverlet go of thesaw when theengine is running.
• Make sure that thework area is free of obstacles. Neverlet thetip of theguide bar contact atree trunk, branch or
other object.
• Always saw using full throttle.
• Do not overreach and do not saw above shoulder height. Thiswill help you to prevent thetip of theguide bar from
accidentally coming into contact with objects and and cause you to lose control over thesaw if something unexpected should
happen.
• Follow themanufacturer’s instructions regarding sharpening and maintenance of thesawchain. Ablunt chain also
increases thelikelihood of kickback.
• Use only those replacement parts, guide bar and saw chain recommended by themanufacturer. Usingaguide bar
or saw chain of theincorrect type can lead to kickback or chain breakage.
WARNING: BEWARE OF KICKBACK!
Warning: Kickback poses aserious accident risk and can cause theoperator to lose control of thesaw.
Thiscan result in serious injury to theoperator and any bystanders. Bevigilant at alltimes.
Kickback caused by thenose or tip of theguide bar touching anobject or by thewood closing
and pinching thesaw chain in thecut is themain cause of chainsaw accidents.
Specyfikacje produktu
| Marka: | Cocraft |
| Kategoria: | piła |
| Model: | KCM22B |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Cocraft KCM22B, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje piła Cocraft
20 Sierpnia 2024
20 Sierpnia 2024
20 Sierpnia 2024
20 Sierpnia 2024
20 Sierpnia 2024
20 Sierpnia 2024
20 Sierpnia 2024
20 Sierpnia 2024
20 Sierpnia 2024
20 Sierpnia 2024
Instrukcje piła
- piła AEG
- piła Worx
- piła Milwaukee
- piła Stihl
- piła Bosch
- piła Parkside
- piła Stiga
- piła Festool
- piła Bavaria By Einhell
- piła Stanley
- piła Black & Decker
- piła Scheppach
- piła Proxxon
- piła Ford
- piła Lider
- piła Hazet
- piła DeWalt
- piła Einhell
- piła Remington
- piła Silverline
- piła Husqvarna
- piła Makita
- piła Ozito
- piła Rona
- piła Fuxtec
- piła RYOBI
- piła Handy
- piła DEDRA
- piła Baumr-AG
- piła Sovereign
- piła Kraftixx
- piła Trotec
- piła Dremel
- piła Meec Tools
- piła Güde
- piła Texas
- piła Bavaria
- piła Zipper
- piła Florabest
- piła Solo
- piła Ferrex
- piła McKenzie
- piła Westfalia
- piła Ferm
- piła Hitachi
- piła Łucznik
- piła Craftsman
- piła Fieldmann
- piła Shindaiwa
- piła PowerPlus
- piła Alpha Tools
- piła Vonroc
- piła Spear & Jackson
- piła HiKOKI
- piła Workzone
- piła Proviel
- piła Porter-Cable
- piła Masport
- piła Metabo
- piła Cotech
- piła Skil
- piła Maestro
- piła Extralink
- piła NAX
- piła PRIME3
- piła Snow Joe
- piła Greenworks
- piła Yellow Garden Line
- piła Ideal
- piła Wolfcraft
- piła Challenge
- piła Powerworks
- piła Kinzo
- piła Gamma
- piła Kress
- piła Varo
- piła Batavia
- piła Protool
- piła Elu
- piła Lux Tools
- piła Triton
- piła Fleurelle
- piła Evolution
- piła Dual Saw
- piła Elektra Beckum
- piła Toolson
- piła Dexter Power
- piła Toledo
- piła Graule
- piła Exakt
- piła Mac Allister
Najnowsze instrukcje dla piła
24 Października 2024
22 Października 2024
22 Października 2024
22 Października 2024
22 Października 2024
15 Października 2024
15 Października 2024
6 Października 2024
6 Października 2024
5 Października 2024