Instrukcja obsługi Cocraft HC 1400

Cocraft piła HC 1400

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Cocraft HC 1400 (22 stron) w kategorii piła. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/22
ENGLISHSVENSKANORSKSUOMIDEUTSCH
Important:
Read the entire instruction manual
carefully and make sure that you fully
understand it before you use the
equipment. Keep the manual for future
reference.
Viktig information:
Läs hela bruksanvisningen noggrant och
försäkra dig om att du har förstått den
innan du använder utrustningen. Spara
bruksanvisningen för framtida bruk.
Viktig informasjon:
Les disse anvisningene nøye og forsikre
deg om at du forstår dem, før du tar
produktet i bruk. Ta vare på anvisningene
for seinere bruk.
Tärkeää tietoa:
Lue nämä ohjeet huolellisesti ja varmista
että olet ymmärtänyt ne, ennen kuin
alat käyttää laitetta. Säilytä ohjeet
myöhempää tarvetta varten.
Wichtiger Hinweis:
Vor Inbetriebnahme die komplette
Bedienungsanleitung sorgfältig
durchlesen und aufbewahren.
HC1400
INTEGRATED SPINDLE LOCK
1400 W
18-3633 • 41-1475
CIRCULAR SAW
CIRKELSÅG SIRKELSAG
PYÖRÖSAHA KREISSÄGE
Ver. 20171215
Original instructions
Bruksanvisning i original
Originalbruksanvisning
Alkuperäinen käyttöohje
Original Bedienungsanleitung
Art.no Model
18-3633 PSC185G
41-1475 PSC185G
ENGLISH
2
HC 1400 Circular Saw
Art.no 18-3633 Model PSC185G
41-1475 PSC185G
Please read theentire instruction manual before use and then save it for future
reference. Wereserve theright for any errors in text or images and any necessary
changes made to technicaldata. Intheevent of technical problems or other queries,
please contact our Customer Services (see address details on theback).
Safety
General Power Tool Safety Warnings
WARNING Read all safety warnings and all instructions. Failure to follow
thewarnings and instructions may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
Theterm ”power tool” in thewarnings refers to your mains-operated (corded) power
tool or battery-operated (cordless) powertool.
1) Work area safety
a) Keep work area clean and welllit. Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive atmospheres, such as in thepresence
of ammable liquids, gases ordust. Powertools create sparks which may ignite
thedust orfumes.
c) Keep children and bystanders away while operating apowertool.
Distractions can cause you to lose control.
2) Electrical safety
a) Power tool plugs must match theoutlet. Nevermodify theplug in anyway.
Donot use any adapter plugs with earthed (grounded) powertools.
Unmodified plugs and matching outlets will reduce risk of electricshock.
b) Avoid body contact with grounded surfaces, such as pipes, radiators, ranges
and refrigerators. Thereis anincreased risk of electric shock if your body is
earthed or grounded.
c) Do not expose power tools to rain or wet conditions. Waterentering apower
tool will increase therisk of electricshock.
d) Do not abuse thecord. Neveruse thecord for carrying, pulling or unplugging
thepowertool. Keepcord away from heat, oil, sharp edges or movingparts.
Damaged or entangled cords increase therisk of electricshock.
e) When operating apower tool outdoors, use anextension cord suitable for
outdooruse. Useof acord suitable for outdoor use reduces therisk of electricshock.
f) If operating apower tool in adamp location is unavoidable, use aresidual current
device (RCD) protected supply. Useof anRCD reduces therisk of electricshock.
ENGLISH
3
3) Personal safety
a) Stay alert, watch what you are doing and use common sense when operating
apowertool. Donot use apower tool while you are tired or under
theinfluence of drugs, alcohol or medication. Amoment of inattention while
operating power tools may result in serious personal injury.
b) Use personal protective equipment. Always wear eye protection.
Protective equipment such as dust mask, non-skid safety shoes, hard hat,
or hearing protection used for appropriate conditions will reduce personal injuries.
c) Prevent unintentional starting. Ensure theswitch is in theoff-position before
connecting to power source and/or battery pack, picking up or carrying
thetool. Carrying power tools with your finger on theswitch or energising power
tools that have theswitch on invites accidents.
d) Remove any adjusting key or wrench before turning thepower toolon.
Awrench or akey left attached to arotating part of thepower tool may result in
personal injury.
e) Do not overreach. Keepproper footing and balance at alltimes. Thisenables
better control of thepower tool in unexpected situations.
f) Dress properly. Donot wear loose clothing or jewellery. Keepyour hair, clothing
and gloves away from movingparts. Looseclothes, jewellery or long hair can be
caught in movingparts.
g) If devices are provided for theconnection of dust extraction and collection
facilities, ensure these are connected and properlyused. Useof dust collection
can reduce dust-related hazards.
4) Power tool use and care
a) Do not force thepowertool. Usethecorrect power tool for your application.
Thecorrect power tool will do thejob better and safer at therate for which it was designed.
b) Do not use thepower tool if theswitch does not turn it on andoff. Anypower
tool that cannot be controlled with theswitch is dangerous and must be repaired.
c) Disconnect theplug from thepower source and/or thebattery pack from
thepower tool before making any adjustments, changing accessories, or
storing powertools. Suchpreventive safety measures reduce therisk of starting
thepower tool accidentally.
d) Store idle power tools out of thereach of children and do not allow persons
unfamiliar with thepower tool or these instructions to operate thepowertool.
Powertools are dangerous in thehands of untrainedusers.
e) Maintain powertools. Checkfor misalignment or binding of moving parts,
breakage of parts and any other condition that may affect thepower tool’s
operation. Ifdamaged, have thepower tool repaired beforeuse.
Many accidents are caused by poorly maintained powertools.


Specyfikacje produktu

Marka: Cocraft
Kategoria: piła
Model: HC 1400

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Cocraft HC 1400, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje piła Cocraft

Instrukcje piła

Najnowsze instrukcje dla piła

HiKOKI

HiKOKI C10FSB Instrukcja

24 Października 2024
Alpha Tools

Alpha Tools BSL 750 Instrukcja

22 Października 2024
Alpha Tools

Alpha Tools PS 600 E Instrukcja

22 Października 2024
Alpha Tools

Alpha Tools MHK 500 Instrukcja

22 Października 2024
Alpha Tools

Alpha Tools PS 520E Instrukcja

22 Października 2024
Makita

Makita 4333 dwde Instrukcja

15 Października 2024
Makita

Makita 5103r Instrukcja

15 Października 2024
Meec Tools

Meec Tools 000-707 Instrukcja

6 Października 2024
Meec Tools

Meec Tools 004-907 Instrukcja

6 Października 2024
Kress

Kress 1400 DS Instrukcja

5 Października 2024