Instrukcja obsługi Coby CR-A54

Coby Radiobudzik CR-A54

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Coby CR-A54 (3 stron) w kategorii Radiobudzik. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/3
CR-A54
CR-A50
The lightning flash with arrowhead symbol within an equilateral tri-
angle is intended to alert the user to the presence of uninsulated
“dangerous voltage” within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of electric shock.
The exclamation point within an equilateral triangle is intended to
alert the user to the presence of important operation and servicing
instructions in the literature accompanying the appliance.
For Customer Use:
Enter below the serial number that is located on the bottom of
the unit. Retain this information for future reference.
Model No. CR-A54 / CR-A50
Serial No.
For recycling or disposal information about this product,
please contact your local authorities or the Electronics In-
dustries Alliance: www.eiae.org.
WARNING:
To prevent fire or shock hazard, do not expose this device to rain or moisture. Dangerous high
voltage is present inside the enclosure. Do not open the cabinet.
CAUTION: To prevent electric shock, match wide blade of plug to wide slot of outlet and fully
insert.
Protect your hearing: Hearing experts advise against the constant use of personal stereos
played at high volume. Constant exposure to high volumes can lead to hearing loss. If you should
experience ringing in the ears or hearing loss, discontinue use and seek medical advice.
Important Safety Instructions
PRECAUTIONS
FCC Statement:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
Note:
This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to Part 15 of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
Use of shielded cable is required to comply with Class B limits in Subpart B of Part 15 of the FCC rules.
Do not make any changes or modifications to the equipment unless otherwise specified in the manual. If such changes or modifications should be made, you could be
required to stop operation of the equipment.
Read Instructions: All the safety and operating instructions should be read before the
product is operated.
Retain Instructions: The safety and operating instructions should be retained for future
reference.
Heed Warnings: All warnings on the product and in the operating instructions should
be adhered to.
Follow Instructions: All operating and usage instructions should be followed.
Cleaning: Unplug this product from the wall outlet before cleaning. Do not use liquid
cleaners or aerosol cleaners. Use a damp cloth for cleaning.
Attachments: Use only attachments recommended by the manufacturer. Use of other
attachments may be hazardous.
Water and Moisture: Do not use this product near water (e.g., near a bath tub, washbowl,
kitchen sink, laundry tub, in wet basements, or near a swimming pool and the like).
Accessories: Do not place this product on an unstable cart, stand, tripod, bracket, or
table. Use only with carts, stands, tripods, brackets, or tables recommended by the
manufacturer or sold with the product. Any mounting of the product should follow the
manufacturer’s instructions and should use a mounting accessory recommended by
the manufacturer.
A product and cart combination should be moved with care. Quick stops,
excessive force, and uneven surfaces may cause the product and cart
combination to overturn.
Ventilation: Slots and openings in the cabinet are provided for ventilation
to ensure reliable operation of the product and to protect it from overheat-
ing. These openings should never be blocked by placing the product on a bed, sofa,
rug, or other similar surface. This product should not be placed in a built-in installation
such as a bookcase or rack unless proper ventilation is provided or the manufacturer
instructions have been adhered to.
Power Sources: This product should be operated only from the type of power source
indicated on the rating label. If you are not sure of the type of power supply to your home,
consult your product dealer or local power company. For products intended to operate
from battery power or other sources, refer to the operating instructions.
Grounding or Polarization: This product may be equipped with a polarized alternating-
current line plug that has one blade wider than the other. This plug will only fit into the
power outlet in one direction. This is a safety feature. If you are unable to insert the plug
fully into the outlet, try reversing the direction of the plug. If the plug should still fail to fit,
contact an electrician to replace the obsolete outlet. Do not defeat the safety purpose
of the polarized plug.
Power-Cord Protection: Power supply cords should be routed so that they are not likely
to be walked on or pinched by items placed upon or against them, paying particular
attention to cords at plugs, convenience receptacles, and at the point which they exit
from the product.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
Specifications and manual are subject to change without prior notice.
If you have a problem with this unit, please read the troubleshooting guide below and check our website at www.cobyusa.com for Frequently Asked
Questions (FAQs) and firmware updates. If these resources do not resolve the problem, please contact Technical Support.
The unit does not turn on.
Make sure the unit has been powered on manually.•
•
COBY Electronics Technical Support
56-65 Rust Street
Maspeth, NY 11378
Email: techsupport@cobyusa.com
Web: www.cobyusa.com
Phone: 800-727-3592 (8:00 AM–11:00 PM EST, seven days a week)
800-681-2629 (8:00 AM–5:30 PM EST, Monday to Friday)
718-416-3197 (8:00 AM–5:30 PM EST, Monday to Friday)
There is no sound.
Ensure that the volume of CR-A54/50 and or external device has been set to a
reasonable listening level.
•
•
Lightning: For added protection for this product, unplug it from the wall outlet and discon-
nect the antenna or cable system during a lightning storm or when it is left unattended
and unused for long periods of time. This will prevent damage to the product due to
lightning or power-line surges.
Power Lines: An outside antenna system should not be located in the vicinity of over-
head power lines or other electric light or power circuits, or where it can fall into such
power lines or circuits. When installing an outside antenna system, extreme care should
be taken to keep from touching such power lines or circuits, as contact with them might
be fatal.
Overloading: Do not overload wall outlets, extension cords, or integral convenience
receptacles as this can result in a risk of re or electric shock.fi
14.
15.
16.
Object and Liquid Entry: Never push objects of any kind into this product through open-
ings as they may touch dangerous voltage points or shout-out parts that could result in
a fire or electric shock. Never spill liquid of any kind on the product.
Servicing: Do not attempt to service this product yourself as opening or removing covers
may expose you to dangerous voltage or other hazards. Refer all servicing to qualifi ed
service personnel.
Damage Requiring Service: Unplug this product from the wall outlet and refer servicing
to qualified service personnel under the following conditions: a) when the power-supply
or plug is damaged; b) if liquid has been spilled or if objects have fallen into the product;
c) if the product has been exposed to rain or water; d) if the product does not operate
normally by following the operating instructions. Adjust only those controls that are cov
-
ered by the operating instructions as improper adjustment of other controls may result
in damage and will often require extensive work by a qualified technician to restore the
product to its normal operation; e) if the product has been dropped or damaged in any
way; f) when the product exhibits a distinct change in performance—this indicates a
need for service.
Replacement Parts: When replacement parts are required, be sure that your service
technician has used replacement parts specified by the manufacturer or have the same
characteristics as the original part. Unauthorized substitutions may result in fire, electric
shock, or other hazards.
Safety Check: Upon completion of any service or repairs to this product, ask the service
technician to perform safety checks to ensure that the product is in proper operating
condition.
Wall or Ceiling Mounting: The product should be mounted to a wall or ceiling only as
recommended by the manufacturer.
Heat: The product should be situated away from heat sources such as radiators, heat
registers, stoves, or other products (including amplifiers) that produce heat.
17.
18.
19.
20.
21.
22.
23.
Make sure the external device has been properly connected to CR-A54/50 by
audio cable.
Troubleshooting
Specifications
Power supply: CR-A54: 120V 60Hz or 220V 50Hz
CR-A50: 120V 60Hz
Back-up battery: DC 9 V
Frequencies: FM 88 - 108MHz
AM 530 - 1700KHz
Power consumption: 3W
Output power: 0.5W
Speaker: 8 ohm
Ensure that the power cord has been properly connected to the power outlet
and the power supply for CR-A54 is 120V 60Hz or 220V 50Hz and for CR-A50
is 120V 60Hz.
LOCATION OF CONTROLS and PARTS
1
LED Display
1
Frequency Display
2
2
3
3
4
5
6
7
8
9
10
11
12
13
1415
4
Function switch
5
Minute button ( M )
6
Hour button ( H )
7
Alarm button
8
Clock button
9
Sleep button
10
Tuning dial
11
AM / FM / AUX Switch
12
AUX IN jack
13
Volume dial ( Buzzer On )
14
Battery compartment
15
Ventilation Slots
16
Snooze button
3
Speaker
16
POWER SUPPLY
The CR-A54 operates from AC 120V 60Hz or 220V 50Hz household
mains supply.
The CR-A50 operates from AC 120V 60Hz household mains supply.
Before connecting to the power supply, ensure the rated voltage of this
unit matches your local voltage.
Warning: Disconnect the mains plug from the wall outlet when it is not in
use to avoid the risk of electric shock.
BATTERY BACK-UP
Install a 9V type 006P battery in the battery compartment for clock
backup (not for radio operation). The time will be preserved in the
case of a power failure. Replace the battery every 6 months for best
performance. Remove the battery if the unit will not be in use for a
long period of time.
SETTING THE CORRECT TIME
Hold the CLOCK button [8] and simultaneously press the HOUR button
[6] or MINUTE button [5] until the desired time is displayed.
RADIO OPERATION:
1. To turn the radio on, set the FUNCTION switch [4] to the “ON”
position.
2. To select the AM or FM radio band, set the AM/FM/AUX switch [11] to
the AM or FM position.
3. To tune to a radio station, turn the TUNING dial [10].
4. To adjust the volume level, turn the VOLUME dial [13].
5. To turn the radio off, set the FUNCTION switch [4] to the “OFF”
position.
ALARM TIMER (WAKE TO RADIO OR BUZZER)
1. To set the alarm timer: hold the ALARM button [7] and simultaneously
press the HOUR button [6] or MINUTE button [5] until the desired time is
displayed.
2. To wake to radio: Turn the radio on to tune to the desired radio station
and set the desired volume level.
To wake to buzzer: Turn the VOLUME dial [13] all the way down until it
clicks into the “BUZZER ON” position.
3. To activate the alarm timer, set the FUNCTION switch [4] to the
“AUTO” position. The ALARM INDICATOR will light up. When the alarm
timer reaches the set time, the radio or buzzer will activate to wake you
up.
4. To turn off the alarm timer, set the FUNCTION switch [4] to the “OFF”
position.
SNOOZE DELAYED ALARM
1. To delay the alarm timer (snooze), press the SNOOZE button [16]
when the alarm timer sounds. The alarm timer will sound again 9
minutes later.
2. To cancel the snooze operation and turn the alarm timer off
completely, set the FUNCTION switch [4] to the "OFF" position.
SLEEP OR SLEEP-AND-WAKE TO RADIO
1. Turn the radio on to tune to the desired radio station and set the
desired volume
level.
2. To Sleep to Radio: Set the FUNCTION switch [4] to the “OFF”
position.
To Sleep-and-Wake to Radio: Set the FUNCTION switch [4] to the
“AUTO”
position.
3. To activate the Sleep timer, press the SLEEP button [9]. The clock
will display
“0:59” to indicate the default sleep period. The radio will turn off
automatically
when the sleep period is over (59 minutes).
4. To increase the sleep period: Hold the SLEEP button [9] and
simultaneously press the HOUR button [6]. The sleep timer will
increase by one hour to “1:59” (1 hour and 59 minutes).
To reduce the sleep period: Hold the SLEEP button [9] and
simultaneously press the MINUTE button [5]. The sleep timer will
decrease by one minute.
5. To turn the radio off before the sleep timer is over, press the
SNOOZE button [16].
AUXILIARY AUDIO INPUT FROM EXTERNAL DEVICE
1. Set the AM/FM/AUX switch [11] to the "AUX" position.
2. Set the FUNCTION switch [4] to the "ON" position.
3. Use a 3.5mm male to male audio cable to connect the Headphone /
Audio Out jack of the external device to the AUX IN jack [12] of the
CRA-54/50.
4. Adjust the volume to a comfortable listening level and start playback
on the external device. You may also use the VOLUME dial [13] of the
CRA-54/50 to adjust the volume level.
907-CRA5-4S01-00

Specyfikacje produktu

Marka: Coby
Kategoria: Radiobudzik
Model: CR-A54

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Coby CR-A54, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Radiobudzik Coby

Coby

Coby CR-A68 Instrukcja

30 Września 2024
Coby

Coby CS-MP150 Instrukcja

30 Września 2024
Coby

Coby CSMP162 Instrukcja

30 Września 2024
Coby

Coby CR-A119 Instrukcja

30 Września 2024
Coby

Coby CSMP125 Instrukcja

30 Września 2024
Coby

Coby CX-266 Instrukcja

30 Września 2024
Coby

Coby CR-A58 Instrukcja

30 Września 2024
Coby

Coby CSMP120 Instrukcja

30 Września 2024
Coby

Coby CDRA147 Instrukcja

30 Września 2024
Coby

Coby CR-A149 Instrukcja

30 Września 2024

Instrukcje Radiobudzik

Najnowsze instrukcje dla Radiobudzik

Insignia

Insignia NS-ALCL24 Instrukcja

15 Października 2024
La Crosse Technology

La Crosse Technology 617-710 Instrukcja

9 Października 2024
La Crosse Technology

La Crosse Technology 617-710B Instrukcja

9 Października 2024
La Crosse Technology

La Crosse Technology 13012 Instrukcja

9 Października 2024
La Crosse Technology

La Crosse Technology 13014 Instrukcja

9 Października 2024
Bearware

Bearware 307021 Instrukcja

9 Października 2024
Bearware

Bearware 307022 Instrukcja

9 Października 2024
Bearware

Bearware 307028 Instrukcja

9 Października 2024
Bearware

Bearware 307023 Instrukcja

9 Października 2024
La Crosse Technology

La Crosse Technology W72449 Instrukcja

8 Października 2024