Instrukcja obsługi Cobra CDR 895 D

Cobra kamera wideo CDR 895 D

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Cobra CDR 895 D (1 stron) w kategorii kamera wideo. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/1
CDR 895 D
QUICK START GUIDE
©2016 Cobra Electronics Corp., Part No.: 480-1069-P, Printed in China, Version B
CONTROLS & CONNECTIONS
INSTALLATION
COMPUTER CONNECTION
HDMI, the HDMI logo, and High-Denition Multimedia Interface are trademarks or registered
trademarks of HDMI Licensing, LLC in the United States and/or other countries.
Press to stop recording and to start. When
CAM 2 is connected is displayed instead of to
indicate dual recording.
Pressing at any time will capture a still photo on both
CAM 1 and CAM 2.
Press create an Emergency Recording. Emergency
Recording ply to both CAM 1 and CAM 2 video files and
will not be overwritten by Continuous Loop Recording.
While recording, press Button 1 to toggle between viewing
modes. With CAM 2 connected, the options are CAM 1,
CAM 2, Split Screen, and Screen Off. Note that viewing mode
does not affect recording. Separate video files are created
for CAM 1 and CAM 2 regardless of your viewing mode.
For full product manuals, firmware
updates and additional language support,
visit www.cobra.com
Power/Volume
Button
Microphone
Micro SD
Card Slot
Emergency Recording Button
Micro
USB Port
HDMI
Output
LED
Indicator
Quick Release
Mount
Button 4
Button 1
Button 3Button 2
GPS Port
The functions of Buttons 1-4 are indicated by the icon directly above
each button and change depending on the state of the unit.
To view videos on a computer connect to CAM 1 using the
short Micro USB->USB Cable.
Select on the dash cam. It will mount Connect to Computer
as a drive on the computer called . DriveHD
Movie clips and photos can be found in the DCIM folder.
Video clips are saved as .MOV files and can be played by
most video players on both PC and Mac.
For synchronized playback of CAM 1 and CAM 2 video download
Drive HD Player at www.cobra.com/support/software-downloads
STORAGE
A 16GB MicroSD Card comes installed in this dash
cam, but it can support cards up to 64GB. The MicroSD
card speed must be rated Class 10 or higher.
CONTINUOUS LOOP RECORDING
When the MicroSD Card is full it will overwrite the
oldest clips to make room for new footage.
G-SENSOR
A built-in accelerometer senses sudden accelerations or
collisions and automatically protects footage surrounding
the incident so that it will not be overwritten by
Continuous Loop Recording.
PARKING MODE
Parking Mode provides security while your vehicle is parked.
If the dash cam doesn’t sense any motion for a set time the
screen will turn off and recording will stop. If motion is
detected or the G-Sensor is triggered, the camera will
automatically wake up and start recording again.
KEY DASH CAM FEATURES
DUAL CAMERA SET-UP
MOUNT
CAM 1 - Screw the suction cup into
the Quick Release Mount. Slide the
mount into CAM 1 and press the lever
to secure the unit to your vehicle’s
front windshield.
CAM 2 – Attach CAM 2 to the
windshield using the adhesive tape.
CAM 2 is most commonly installed
facing out the rear on the top center
of the rear windshield. It can also be
mounted on the front windshield
to record the interior of the vehicle.
1
INSTALLATION continued
POWER
The CDR 895 D utilizes a Y-Splitter to offer maximum flexibility
and clean installation without dangling wires.
• Plug the Y-Splitter into the Micro USB Port on CAM 1.
• Connect the Micro USB end of the power cord into
the Y-Splitter. Connect the USB end of the power cord in the
Cigarette Lighter Adapter and then plug into your vehicle.
• Plug CAM 2 into the Y-Splitter. Use the Extender Cable
if necessary.
• Organize and tuck away cables to make sure that the driver’s
view is not obstructed. In most vehicles it’s possible to tuck
Y-Splitter and cables into the headliner and cleanly hide the
extender cable along the top wall all the way to the rear of the
vehicle. Professional installation is recommended.
2
If CAM 2 videos appear upside-down enter the Video Settings
Menu and turn to . Flip Cam 2 ON
If you have mounted CAM 2 facing forward enter the Video
Settings Menu and turn to .Mirror CAM 2 OFF
Note: The long (10ft) USB->Micro USB cord is for power only.
Use the short (18in) USB->Micro USB cord to connect to
a computer.
BASIC OPERATION
Car Power
Adapter
CAM 2
CAM 2 Extender
Cable (Optional)
CAM 2
Y-Splitter Cable
CAM 1
Power Cord
10 Ft. (3M)
Windshield
Back Window
Windshield Back Window
Reset Button

Specyfikacje produktu

Marka: Cobra
Kategoria: kamera wideo
Model: CDR 895 D

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Cobra CDR 895 D, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje kamera wideo Cobra

Cobra

Cobra DASH2208 Instrukcja

21 Września 2024
Cobra

Cobra WASPcam 9903 Instrukcja

10 Września 2024
Cobra

Cobra WASPcam 9902 Instrukcja

8 Września 2024
Cobra

Cobra WASPcam ROX 9940 HD Instrukcja

3 Września 2024
Cobra

Cobra WASPcam 9904 Instrukcja

1 Września 2024
Cobra

Cobra WASPcam 9900 Instrukcja

30 Sierpnia 2024
Cobra

Cobra WASPcam ROX 9942 Camo Instrukcja

30 Sierpnia 2024
Cobra

Cobra WASPcam 9905 Wi-Fi Instrukcja

29 Sierpnia 2024
Cobra

Cobra CDR 875G Instrukcja

27 Sierpnia 2024
Cobra

Cobra Adventure HD5210 Instrukcja

24 Sierpnia 2024

Instrukcje kamera wideo

Najnowsze instrukcje dla kamera wideo

PCE Instruments

PCE Instruments PCE-DHM 2 Instrukcja

14 Marca 2025
Mio

Mio MiSentry 12T Instrukcja

12 Marca 2025
Mio

Mio MiVue M820WD Instrukcja

12 Marca 2025
Mio

Mio MiVue 955WD Instrukcja

12 Marca 2025
Navitel

Navitel MSR300 GPS Instrukcja

28 Lutego 2025
IOPLEE

IOPLEE IOPEXTDASCAM404B Instrukcja

21 Lutego 2025
PCE Instruments

PCE Instruments PCE-VE 1030N Instrukcja

20 Lutego 2025
Rollei

Rollei Actioncam 7s Instrukcja

5 Lutego 2025
Sony

Sony E Instrukcja

15 Stycznia 2025
Zoom

Zoom Q4 Instrukcja

14 Stycznia 2025