Instrukcja obsługi Clarion CJ-981E

Clarion Niesklasyfikowane CJ-981E

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Clarion CJ-981E (61 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/61

2CJ-981E

Be sure to unfold and read the next page.

Veuillez déplier et vous référer à la page suivante.

Bitte ausbreiten und die nächste Seite lesen.

Assicurarsi di aprire e leggere la pagina successiva.

6.5 LCD Color Monitor for Rear-View

Vehicular Camera Systems

Écran LCD couleur de 6,5 pouces pour

système rétro caméra automobile

6,5-Zoll-LCD-Farbmonitor für Fahrzeug-

Heckkameraanlagen

Monitor LCD a colori da 6,5” per telecamere

di retrovisione per automobili

Owner’s manual & Installation manual

Mode d’emploi et manuel d’installation

Bedienungs- & Installationsanleitung

Manuale d’Istruzioni e d’Installazione

CJ-981E

ADJPOWER SELEC T IR IS ZOO M CAM1/DIM

FUNC MODE

English DeutschFrançais Italiano

English

Thank you for purchasing this Clarion product.

∗Please read this owner’s manual in its entirety before operating this equipment.

∗After reading this manual, be sure to keep it in a handy place (e.g., glove compartment).

∗Check the contents of the enclosed warranty card and keep it carefully with this manual.

1. FEATURES

■6.5" TFT active-matrix-drive wide color-

LCD display

■Reverse-gear linked display

When used to confirm the rear view, the monitor

can be set so that the rear view camera is

automatically selected when the vehicle’s

transmission is shifted to reverse gear.

■Automatic Screen Saver Function

In manual mode (CAM mode), a timer can be

set to automatically turn off the screen after a

preset interval, thus helping preserve the

monitor.

■Scale Marker Display

When using the camera image to confirm

safety, scale marks displayed onscreen assist

the driver in determining distances to obstacles.

■Backlight compensation function

The camera’s aperture (iris) can be adjusted

to provide brighter viewing under adverse

backlighted conditions (e.g., when vehicle

shadow is cast in the camera path or when

entering a garage).

■Screen brightness (DIMMER) linked to

parking lamp switch

■Supports use of CC-2000 series digital

1.4x zoom CCD cameras

Supports zoom function for 1.4x magnification

of image.

■Supports DC 24V or DC 12V vehicles

Voltage can be switched at power supply box.

■Auxiliary input (power supply box VIDEO/

IN) connector

Can be used to view images from sources

other than a camera (to prevent driver

distraction, auxiliary video images cannot be

viewed when vehicle is moving).

■Image controls

Image adjustment controls include BRIGHT

(luminance), HUE (tint), COLOR (saturation),

and DIMMER.

■Three camera input (power supply box

CAMERA/IN) connectors

An additional two cameras can be connected

in addition to the rear-view camera.

■RGB video input (power supply box RGB/

IN) connectors

Allows viewing of images from an auto

navigation system, etc.

Contents

1. FEATURES ............................................. 2

2. NAMES AND FUNCTIONS OF PARTS ... 3

3. PRECAUTIONS ...................................... 5

Handling Precautions ...............................5

4. OPERATIONS .......................................... 7

Adjusting the Image Quality .....................7

Selecting VTR Playback Mode

(NTSC/PAL) .............................................. 7

Setting the Camera Function

(CAM TYPE) ............................................. 7

To Display Onscrren Scale Markers

(MARKER) ................................................ 8

Setting the Marker Pattern

(MARKER SELECT) .................................8

Adjusting the Bumper Position

(MARKER ADJUST) ................................. 9

Setting the Screen Saver

TIMER Function ..................................... 10

Setting the Camera Linked-Image Switch

(CAM AUTO/CAM HAZARD) ................. 10

Enlarging the CCD Camera’s Image

(ZOOM Function) ................................... 11

Backlight Compensation Function

(IRIS) ...................................................... 11

Using the Dimmer Function (DIM) .......... 12

To Immediately Switch to

CAMERA1 Image ................................... 12

5. INSTALLATION ...................................... 13

Before Installing ...................................... 13

Installing the Monitor Stand/Display Unit ...

6. TROUBLRSHOOTING ........................... 15

7. SPECIFICATIONS ................................. 15

3 4CJ-981E CJ-981E

Note: Be sure to unfold this page and refer to the front diagrams as you read each chapter.

Remarque: Veuillez déplier cette page et vous ré éf rer aux schémas quand vous lisez chaque chapitre.

Hinweis: Bitte diese Seite ausfalten und beim Lesen der einzelnen Kapitel die Frontdiagramme beachten.

Nota: Assicurarsi di aprire questa pagina e fare riferimento a questi diagrammi quando si legge ciascun capitolo.

NAMES AND FUNCTIONS OF PARTS

NOM ET FONCTIONS DES ORGANES

BEZEICHNUNG UND FUNKTION DER TEILE

NOME E FUNZIONE DELLE VARIE PARTI

English Fran aisçDeutsch Italiano

English

ADJ

POWER SE LEC T IRI S ZOOM C AM1/DIM

FUNC MODE

[FUNC]

[MODE]

[ ], [ ]z w

[ ], [ ]Å Î

[CAM1/DIM]

[ZOOM]

[IRIS]

[SELECT]

[POWER]

[IRIS] button

• “ ”During the CAM mode, pressing this button

causes the camera to alterate between

backlight compensation ON and OFF.

[SELECT] button

• “ ”During the CAM mode, pressing this button

causes the screen mode to change in the

following order: CAMERA1 ➜ CAMERA2 ➜

CAMERA3 ➜ CAMERA1

[POWER] indicator

•Light turns off when the power is turned ON,

and illuminates when power is turned OFF.

When unit is turned OFF, it enters the standby

mode, and if the vehicle s transmission is’

shifted to reverse gear, the monitor

automatically powers on and displays the

rear-view camera image.

[FUNC] button

•When power is OFF, pressing this button will

turn power ON.

•When power is ON, pressing this button will

switch unit alternately between “ ” “ ”CAM , VTR ,

and “ ”RGB modes. If the button is held

depressed for about 1 second, power is

turned OFF.

[MODE] button

• “ ”In CAM mode, pressing this button causes

the setting menu screen to change (screen

size is fixed at (full wide)).“ ”F-WIDE

CAM: displays image from camera

MARKER: displays setting menu for scale

markers

CAM TYPE: displays camera type setting menu

MARKER SELECT: displays marker pattern

setting menu

MARKER ADJUST: displays marker display

position setting menu

TIMER: displays timer operation menu

CAM1 AUTO: CAMERA1 image linked setting

CAM2 AUTO: CAMERA2 image linked setting

CAM3 AUTO: CAMERA3 image linked setting

CAM2 HAZARD:

CAMERA2 hazard linked setting

CAM3 HAZARD:

CAMERA3 hazard linked setting

∗ During display of images from

CAMERA

2 or

CAMERA

3, the , “ ”MARKER “MARKER

SELECT MARKER ADJUST” “, and ”

setting menus do not appear.

[MODE] button

• “ ”During VTR mode, pressing this button

causes the screen to change in the following

order:

F-WIDE: 4:3 ratio images are stretched

horizontally to fill the entire screen.

CINEMA 1: 4:3 ratio images are displayed

“ ”letterbox style, with black band at top

and bottom.

CINEMA 2: Use this mode if subtitles are cut off

when using .“ ”CINEMA 1

NORMAL: Normal 4:3 ratio television display

mode.

WIDE: 4:3 ratio images are stretched

horizontally on left and right sides only.

Note:

• “ ”Images displayed in VTR mode are those input

through the power supply box s video input’

connectors. In order to prevent distractions to the

driver, these images cannot be viewed unless the

vehicle is stopped and the parking brake applied.

■When normal 4:3 ratio images are input,

the image shape will differ depending on

the display mode setting, as follows:

° WIDE mode

Left and right

sides of image are

stretched

horizontally.

° CINEMA 1 mode

Top and bottom

portions of image

are cut off.

° F-WIDE mode

Entire image is

stretched

horizontally.

° NORMAL mode

Right and left

edges of screen

appear as black

stripes.

° CINEMA 2 mode

Top portion of

image is cut off.

°Regarding WIDE screen images

Wide television monitors are equipped with

controls allowing the user to select from a

variety of display modes. If the mode chosen

differs from the ratio of the original television

program or movie software, the screen image

will appear distorted from its original

appearance. This point should be taken into

account when selecting a video mode.

[z], [w] buttons

•In the setting menu, use to move to different

menu selections or change adjustment levels.

[Å], [Î] buttons

•In the setting menu, use to change

adjustment levels.

[CAM1/DIM] button

•Switches to image from CAMERA1 input.

•When showing normal image, holding the

button depressed for about 1 second

switches dimmer between Light/Dark settings.

[ZOOM] button

• “ ”During the CAM mode, pressing this button

causes the camera to alternate between

camera zoom ON and OFF.

CJ-981E 5

English

3. PRECAUTIONS

CAUTION

• The rear-view monitor image has the same

right-left inversion as your vehicle’s rear-

view mirrors. Depending on the vehicle,

the field and angle of view may differ.

• Do not attempt to use this device for

applications other those for which it was

designed.

Electrical shock or other injury may result.

• Never attach or detach cables and wires while

the system is operating, since accidents may

result. Always turn off the vehicle’s power

(ACC-OFF) before connecting or

disconnecting cables.

• This component is a video monitor; it does not

operate alone, and must be combined with

separately purchased power supply box and

CCD camera.

• The miniature fluorescent tubes installed in

this type of LCD panel are considered

consumable parts. If the screen image

appears dark or flickers, the tubes may

require replacement (median lifetime is about

5,000 hours).

Handling Precautions

■

Regarding the LCD screen

• In very cold climates, the screen updating

may become slower or the image may appear

darker than usual; this is not a malfunction.

Operation should return to normal when the

temperature rises.

• Small black or bright pixel points may appear

within the LCD, but this is a characteristic of

LCD monitors, and not a malfunction.

• The LCD panel is easily scratched, so do not

rub or strike it with hard objects.

• Do not leave the LCD panel while it is wet,

since discoloration or stains may occur, or

moisture may invade the interior of the unit,

resulting in damage. In the event water drops

are splashed on the unit, wipe them away with

cotton or soft cloth.

• During summer months, temperatures inside

a vehicle may rise precipitously; in such

cases, allow the vehicle interior to cool before

using the unit. The permissible temperature

range during use is 0 ˚C to 40 ˚C.

WARNING

•Do Not Back Up Vehicle While Relying

Only on the Monitor Image

The rear-view monitor should be considered an

auxiliary device meant to help confirm the

presence of obstacles, but its field of view is

limited. Always back the vehicle only after

confirming with the naked eye that it conditions

are safe. Failure to do so could result in serious

injury or damage to persons or objects lying

outside the camera’s field of view.

•Use Slow Speeds When Backing Up

The rear-view camera utilizes a wide-angle

lens, with the result that the actual distance to

obstacles may be less than the perceived

onscreen distance; backing up quickly may

result in a serious accident involving damage

or injuries to property or persons.

•Always Park in a Safe Area When Viewing

Television or Videos

To prevent distraction to the driver, vehicular

video devices are designed to operate only

when the vehicle is stopped and the parking

brake applied.

•Do Not Attempt to Disassemble or Modify

this Device

Disassembly may result in accidents, fire, or

electrical shock.

Specyfikacje produktu

Marka:	Clarion
Kategoria:	Niesklasyfikowane
Model:	CJ-981E

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Clarion CJ-981E, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Niesklasyfikowane Clarion

Clarion NX706E Instrukcja

20 Września 2024

Clarion Z3 Instrukcja

16 Września 2024

Clarion VZ402E Instrukcja

16 Września 2024

Clarion FX504E Instrukcja

15 Września 2024

Clarion TTX7503Z Instrukcja

13 Września 2024

Clarion NX405E Instrukcja

13 Września 2024

Clarion VMA573 Instrukcja

13 Września 2024

Clarion CJ-981E Instrukcja

13 Września 2024

Clarion CMD8 Instrukcja

12 Września 2024

Clarion DGL373 Instrukcja

12 Września 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

Black Diamond BD1121530000ALL1 Instrukcja

15 Października 2024

Husqvarna K 970 SmartGuard Instrukcja

15 Października 2024

Stihl HT 70 Instrukcja

15 Października 2024

Ernesto H14270 Instrukcja

15 Października 2024

Uniden BT MIC KIT Instrukcja

15 Października 2024

Vaude Omnis Bike 26 Instrukcja

15 Października 2024

ART ProChannel II Instrukcja

15 Października 2024

Aukey DR02J Instrukcja

15 Października 2024

Master Lock 653EURD Instrukcja

15 Października 2024

Roland FR-18 Diatonic Instrukcja

15 Października 2024