Instrukcja obsługi Citizen Promaster AIR Automatic GMT NB6046-59E

Citizen Oglądać Promaster AIR Automatic GMT NB6046-59E

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Citizen Promaster AIR Automatic GMT NB6046-59E (6 stron) w kategorii Oglądać. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/6
1/6
9054 instruction manual
Thank you for your purchase of this Citizen watch.
Before using the watch, read this instruction manual (PDF) carefully to ensure correct use.
Caliber No. of this watch: 9054
You can access the web instruction manual in addition by using the QR code or the URL:
https://www.citizenwatch-global.com/support/html/en/9054/9054.html
Some models may be equipped with enhanced features functions such as slide rules and tachymeters. To see how to use such features and functions, which is not covered
with the instruction manual, and other information, access the CITIZEN support page (
https://www.citizenwatch-global.com/support/
).
ENGLISH
Safety precautions — IMPORTANT
This manual contains instructions that should be strictly followed at all times
not only for optimal use, but to prevent any injuries to yourself, other persons or
property. We encourage you to read the entire booklet (especially, page
6
) and
understand the meaning of the following symbols:
⿎Safety advisories are categorized and depicted in this manual as follows:
DANGER
Highly likely to cause death or serious injury
WARNING
Can cause serious injury or death
CAUTION
Can or will cause minor or moderate injury or damage
⿎Important instructions are categorized and depicted in this manual as follows:
(Following symbols are examples of Pictograms.)
Warning (caution) symbol followed by prohibited matters.
Warning (caution) symbol followed by instructions that should be followed or
precautions that should be observed.
Features
■
Times of two places can be shown at the same time with the hour and 24-
hour hands.
The hour hand and the date indication can be moved freely without stopping the watch.
You can easily adjust them to a new time such as that of your destination.
■
The third time can be read by using the rotating bezel.
You can read time of one other area than those indicated with the hour hand or the 24-hour
hand by calculating time difference from that indicated with the 24-hour hand and moving
the rotating bezel according to the calculation result.
CONTENTS
Before using this watch ........................................................... 1
Component identification ....................................................... 2
Winding the mainspring ......................................................... 2
Winding the mainspring manually ..........................................................2
Setting the 24-hour hand and the hour hand
to the same time and calendar .............................................. 2
Indicating the time and calendar of another area .................... 3
Using the rotating bezel .......................................................... 4
About mechanical watches ...................................................... 5
Troubleshooting ..................................................................... 5
Water resistance ..................................................................... 6
Precautionary items and usage limitations .............................. 6
Specifications ......................................................................... 6
Before using this watch
Band adjustment
We recommend seeking the assistance of an experienced watch technician for sizing
of your watch. If adjustment is not done correctly, the bracelet may unexpectedly
become detached leading to loss of your watch or injury (excluding products
containing the band adjustment tool).
Consult an authorized service center.
Protective stickers
Be sure to remove any protective stickers that may be on your watch (case back,
band, clasp, etc.). Otherwise, perspiration or moisture may enter the gaps between
the protective stickers and the parts, which may result in a skin rash and/or
corrosion of the metal parts.
How to use a specially designed crown/button
Some models are equipped with a specially designed crown and/or push button to
prevent accidental operation.
Screw down crown/button
Unlock the crown/button prior to operate your watch.
Unlock Lock
Screw down
crown
Rotate the crown
counterclockwise until
it releases from the case.
Push the crown in to
the case. With gentle
pressure towards the
case, rotate the crown
clockwise to secure it
to the case. Be sure to
tighten firmly.
Screw down
push button
Rotate the locking screw
counterclockwise, and
loosen until it stops.
Rotate the locking
screw clockwise, and
tighten firmly.
Recessed button
Press the button with a non-marring narrow-tipped object.
• Metal objects may cause marring or scratching of the button.
2/6
9054 instruction manual
Component identification
• The illustrations in this instruction manual may differ from the actual appearance
of your watch.
Minute hand
24-hour hand
Hour hand
Second hand
Rotating bezel
(for the 24-hour
hand)
Date indication
Crown
Crown's position
Winding the mainspring
This is an automatic mechanical watch powered by a spring.
When wearing the watch, your arm’s movement rotates the oscillating weight to
wind the mainspring automatically.
• When your arm’s movement is small and/or a few, winding will become
insufficient. We recommend to wear the watch as long as possible or wind the
mainspring manually in such cases.
• When not worn, the mainspring will run out in about 2 or 3 days and the watch
will stop.
• Once the mainspring is wound fully, the watch will run for about 50 hours.
Winding the mainspring manually
1 Push the crown in to position 0.
2 Hold the crown with your thumb and index finger and rotate it clockwise
slowly.
• When the watch is stopped, turning the crown about 42 times will wind the
mainspring fully.
• Rotating the crown further after the mainspring was wound fully does not damage
the mainspring.
• Rubbing down the crown from the back side of the watch can also rotate it.
Setting the 24-hour hand and the hour hand to the same
time and calendar
• When the watch is stopped, wind the mainspring beforehand.
• On the figures below, we will show the process to set the date to “8” and the time to
10:00 AM as an example.
1 Rotate the rotating bezel to set “24” to the 12 o’clock position.
• Keep “24” on the rotating bezel set to the 12 o’clock position when moving it to
other positions is not needed.
2 Check if the crown is at position 0.
• If not, push it in to position
0
.
3 Pull the crown out to position 2 as the second hand points 0 second.
The second hand stops.
4 Rotate the crown to adjust the minute and 24-hour hands.
• The hour hand and date indication also move but they will be adjusted later.
• The scale on the rotating bezel helps you to read the 24-hour hand.
5 Push the crown in to position 0 in accordance with reliable time source.
The second hand starts moving.
6 Pull the crown out to position 1.
• The second hand does not stop.
3/6
9054 instruction manual
7 Rotate the crown to adjust the hour hand and the date indication.
• Only the hour hand and the date indication move synchronously.
• The hour hand moves in 1-hour increments.
• You can see transition from AM to PM through movement of the date indication
while the hour hand is passing around 12 o’clock.
• Do not change rotation direction of the crown while the date indication is changing.
Otherwise, the date indication may not change correctly.
8 Push the crown in to position 0 to finish the procedure.
Indicating the time and calendar of another area
You can separately move the hour hand and the date indication to indicate other
time and calendar than that which the 24-hour hand shows.
• When the watch is stopped, wind the mainspring beforehand.
• Both the 24-hour hand and the hour hand are supposed to be set to the time and
calendar of the current place following the steps of “Setting the 24-hour hand and
the hour hand to the same time and calendar” (→ page 2).
1 Find the time and calendar of the area whose time you want to indicate with
the hour hand and the date indication.
2 Pull the crown out to position 1.
• The second hand does not stop.
3 Rotate the crown to adjust the hour hand and the date indication to the time
and calendar you want.
Example
Time in the current
place (24-hour hand)
London, 8th, 10:00
AM
Time and calendar to
indicate (hour hand)
Los Angeles, 8th,
2:00 AM
Rotate the crown
counterclockwise
to move the hour
hand 8 hours
backward.
• Only the hour hand and the date indication move synchronously.
• The hour hand moves in 1-hour increments.
• You can see transition from AM to PM through movement of the date indication
while the hour hand is passing around 12 o’clock.
• Do not change rotation direction of the crown while the date indication is changing.
Otherwise, the date indication may not change correctly.
4 Push the crown in to position 0 to finish the procedure.

Specyfikacje produktu

Marka: Citizen
Kategoria: Oglądać
Model: Promaster AIR Automatic GMT NB6046-59E

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Citizen Promaster AIR Automatic GMT NB6046-59E, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Oglądać Citizen

Citizen

Citizen Cal 411X Instrukcja

6 Października 2024
Citizen

Citizen CAL U700 Instrukcja

5 Października 2024
Citizen

Citizen CAL 4633 Instrukcja

5 Października 2024
Citizen

Citizen Promaster Diver EO2028-06L Instrukcja

4 Października 2024
Citizen

Citizen Sport Automatic NH7530-52L Instrukcja

4 Października 2024
Citizen

Citizen Promaster AIR Automatic GMT NB6046-59E Instrukcja

4 Października 2024
Citizen

Citizen Perpetual Calendar BL5421-01E Instrukcja

4 Października 2024
Citizen

Citizen Limited Edition AQ4103-16E Instrukcja

4 Października 2024
Citizen

Citizen Promaster Aqualand BN2038-01L Instrukcja

4 Października 2024
Citizen

Citizen Attesa Satellite Wave GPS CC4055-65E Instrukcja

4 Października 2024

Instrukcje Oglądać

Najnowsze instrukcje dla Oglądać

Casio

Casio G-Shock GMA-B800 Instrukcja

9 Października 2024
Rolex

Rolex Submariner Instrukcja

9 Października 2024
Casio

Casio GW-3000BD-1AER Instrukcja

9 Października 2024
Seiko

Seiko 6N76 Instrukcja

8 Października 2024
Seiko

Seiko 6N53 Instrukcja

8 Października 2024
Seiko

Seiko 6N52 Instrukcja

8 Października 2024
Seiko

Seiko 6G28 Instrukcja

8 Października 2024
Seiko

Seiko 4N30 Instrukcja

8 Października 2024
Seiko

Seiko 4227 Instrukcja

8 Października 2024
Seiko

Seiko 6N32 Instrukcja

8 Października 2024