Instrukcja obsługi Christie Roadie 4K35


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Christie Roadie 4K35 (83 stron) w kategorii projektor wideo. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/83
U s e r M a n u a l
020-101669-04
Roadie 4K35
NOTICES
COPYRIGHT AND TRADEMARKS
Copyright © 2016 Christie Digital Systems USA Inc. All rights reserved.
All brand names and product names are trademarks, registered trademarks or trade names of their respective holders.
GENERAL
Every effort has been made to ensure accuracy, however in some cases changes in the products or availability could occur which may not be reflected in this
document. Christie reserves the right to make changes to specifications at any time without notice. Performance specifications are typical, but may vary
depending on conditions beyond Christie's control such as maintenance of the product in proper working conditions. Performance specifications are based on
information available at the time of printing. Christie makes no warranty of any kind with regard to this material, including, but not limited to, implied
warranties of fitness for a particular purpose. Christie will not be liable for errors contained herein or for incidental or consequential damages in connection
with the performance or use of this material. Canadian manufacturing facility is ISO 9001 and 14001 certified.
WARRANTY
Products are warranted under Christies standard limited warranty, the complete details of which are available by contacting your Christie dealer or Christie. In
addition to the other limitations that may be specified in Christie’s standard limited warranty and, to the extent relevant or applicable to your product, the
warranty does not cover:
a. Problems or damage occurring during shipment, in either direction.
b. Projector lamps (See Christie’s separate lamp program policy).
c. Problems or damage caused by use of a projector lamp beyond the recommended lamp life, or use of a lamp other than a Christie lamp supplied by
Christie or an authorized distributor of Christie lamps.
d. Problems or damage caused by combination of a product with non-Christie equipment, such as distribution systems, cameras, DVD players, etc., or use
of a product with any non-Christie interface device.
e. Problems or damage caused by the use of any lamp, replacement part or component purchased or obtained from an unauthorized distributor of Christie
lamps, replacement parts or components including, without limitation, any distributor offering Christie lamps, replacement parts or components through
the internet (confirmation of authorized distributors may be obtained from Christie).
f. Problems or damage caused by misuse, improper power source, accident, fire, flood, lightening, earthquake or other natural disaster.
g. Problems or damage caused by improper installation/alignment, or by equipment modification, if by other than Christie service personnel or a Christie
authorized repair service provider.
h. Problems or damage caused by use of a product on a motion platform or other movable device where such product has not been designed, modified or
approved by Christie for such use.
i. Problems or damage caused by use of a projector in the presence of an oil-based fog machine or laser-based lighting that is unrelated to the projector.
j. For LCD projectors, the warranty period specified in the warranty applies only where the LCD projector is in “normal use” which means the LCD projector
is not used more than 8 hours a day, 5 days a week.
k. Except where the product is designed for outdoor use, problems or damage caused by use of the product outdoors unless such product is protected from
precipitation or other adverse weather or environmental conditions and the ambient temperature is within the recommended ambient temperature set
forth in the specifications for such product.
l. Defects caused by normal wear and tear or otherwise due to normal aging of a product.
The warranty does not apply to any product where the serial number has been removed or obliterated. The warranty also does not apply to any product sold
by a reseller to an end user outside of the country where the reseller is located unless (i) Christie has an office in the country where the end user is located or
(ii) the required international warranty fee has been paid.
The warranty does not obligate Christie to provide any on site warranty service at the product site location.
PREVENTATIVE MAINTENANCE
Preventative maintenance is an important part of the continued and proper operation of your product. Please see the Maintenance section for specific
maintenance items as they relate to your product. Failure to perform maintenance as required, and in accordance with the maintenance schedule specified by
Christie, will void the warranty.
REGULATORY
The product has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference when the product is operated in a commercial environment. The product generates, uses, and
can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of the product in a residential area is likely to cause harmful interference in which case the user will be required to correct the
interference at the user’s own expense.
CAN ICES-3 (A) / NMB-3 (A)
이 기기는 업무용 으로 전자파적합등록을 한 기기이오니 판매자 또는 사용자는 이점을 주의하시기 바라며 가정 외의 지역에서 사용하는 것을 목적으로 합니다 (A ) , .
ENVIRONMENTAL
The product is designed and manufactured with high-quality materials and components that can be recycled and reused. This symbol means that electrical
and electronic equipment, at their end-of-life, should be disposed of separately from regular waste. Please dispose of the product appropriately and according
to local regulations. In the European Union, there are separate collection systems for used electrical and electronic products. Please help us to conserve the
environment we live in!
Content
Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Safety and warning guidelines. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Installation safety and warning guidelines. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
AC/power precautions......................................... 9
Lamp precautions 10...........................................
Product safety labels 10.........................................
Light intensity hazard distance 12. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Projector overview.............................................13
Contact your dealer 13............................................
Key features.................................................14
How the projector works.........................................14
List of components.............................................15
Installation and Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Site requirements 16.............................................
Physical operating environment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Power connection 16...........................................
Tools required for installation 16. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Projector components...........................................17
Lamp power supply components 18. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Positioning the projector 19. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Connecting the lamp power supply. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Configuring ballast settings for 200 VAC operation. . . . . . . . . . . . . . . . . . . . . . . 22
Configuring ballast settings for 400 VAC operation. . . . . . . . . . . . . . . . . . . . . . . 23
Adjusting the projector tilt and level. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Installing the foot extension rods. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Installing the touch panel controller. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Connecting external exhaust ducting (optional). . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Removing the projector shroud (optional) 27. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting up the lens.............................................28
Orienting the projector in portrait mode 29. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Connecting devices. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
Input video mapping 30...........................................
Roadie 4K35 User Manual 3
020-101669-04 Rev. 1 (01-2016)
Copyright © 2016 Christie Digital Systems USA Inc. All rights reserved.


Specyfikacje produktu

Marka: Christie
Kategoria: projektor wideo
Model: Roadie 4K35

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Christie Roadie 4K35, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje projektor wideo Christie

Instrukcje projektor wideo

Najnowsze instrukcje dla projektor wideo