Instrukcja obsługi Chief MCS6015


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Chief MCS6015 (2 stron) w kategorii Wsparcie dla płaskich paneli. Ta instrukcja była pomocna dla 8 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/2
I N S T A L LA T I O N I N S T R U C T I O N S
CHIEF MANUFACTURING, a division of Milestone AV Technologies, Inc. 8840-000095
1-800-582-6480 952-894-6280 FAX 952-894-6918 2008© Milestone AV Technologies
8401 EAGLE CREEK PKWY, STE. 700 www.chiefmfg.com
SAVAGE, MINNESOTA 55378 USA 04/08
ALL COMPONENTS MUST BE SECURELY FASTENED TO A
STRUCTURAL MEMBER CAPABLE OF SUPPORTING 4
TIMES THE COMBINED WEIGHT OF ALL COMPONENTS
PLUS THE EQUIPMENT BEING MOUNTED. IF IT CANNOT
SUPPORT THIS WEIGHT, THE STRUCTURE MUST BE
REINFORCED.
THE MAXIMUM WEIGHT TO BE INSTALLED ON THE
MOUNT IS
125
POUNDS (
56
.74
KG).
MSB-6015
FLAT PANEL DISPLAY MOUNTING BRACKET
Prior to assembly, unpack carton completely and verify contents.
If you are missing any of the following components, please contact Customer Service at 1-800/582-6480
(1) Interface Bracket (4) Mounting Button – Tapped
(4) 10-24 x .5 Button Head Cap Screw (4) M5 x 20 Phillips Head Screws
(4) 18 OD x 8.3 ID x 10 L Metric Nylon Spacer (1) 1/8 Allen Key
BEFORE PROCEEDING, READ INSTALLATION INSTRUCTIONS COMPLETELY
DISPLAYS ARE EXTREMELY FRAGILE.
CAUTION!
Figure 1
WARNING!
NOTE: If installing screen on a Chief J-series wall mount, proceed
to Step 2 (J-Series VESA Interface Installation).
1. Using a 10-24 button head cap screw inserted from back side of bracket, secure mounting button, with
chamfered hole of mounting button (larger surface) facing bracket, to top and bottom brackets (four places) (see
Figure 2 & Figure 3).
2. Place Nylon spacers over mounting holes on back of screen. Attach mounting brackets to display using the M5
screws (see Figure 4 & Figure 5). Use the inner set of holes for 32” and 37” screens and the outer set of holes
for 42” and 47” screens.
3. With the aid of another person, lift your display up to the Chief Mount, aligning buttons of mounting brackets
with slots in the Chief Mount. Lower safety latch on the Chief Mount to secure your display, making sure latch
is completely engaged. If using a Chief J-series wall mount, use the M4 screws provided with the wall mount
to attach the wall mount to the interface plate.
Figure 2 Figure 3
Figure 4 Figure 5


Specyfikacje produktu

Marka: Chief
Kategoria: Wsparcie dla płaskich paneli
Model: MCS6015

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Chief MCS6015, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Wsparcie dla płaskich paneli Chief

Chief

Chief RSA213 Instrukcja

28 Grudnia 2024
Chief

Chief RPA640 Instrukcja

28 Grudnia 2024
Chief

Chief RPMA204 Instrukcja

28 Grudnia 2024
Chief

Chief K1D120BXDL Instrukcja

28 Grudnia 2024
Chief

Chief TS218SU Instrukcja

9 Grudnia 2024
Chief

Chief PFQUB Instrukcja

6 Października 2024
Chief

Chief MFQUB Instrukcja

5 Października 2024
Chief

Chief PFMUB Instrukcja

5 Października 2024
Chief

Chief K4G210B Instrukcja

23 Września 2024
Chief

Chief MF26000B Instrukcja

23 Września 2024

Instrukcje Wsparcie dla płaskich paneli

Najnowsze instrukcje dla Wsparcie dla płaskich paneli