Instrukcja obsługi Chief KTA325B

Chief Wsparcie dla płaskich paneli KTA325B

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Chief KTA325B (8 stron) w kategorii Wsparcie dla płaskich paneli. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/8
I N S T A L L A T I O N I N S T R U C T I O N S
CHIEF MANUFACTURING INC.
1-800-582-6480 952-894-6280 FAX 952-894-6918
8401 EAGLE CREEK PARKWAY, STE 700
SAVAGE, MINNESOTA 55378 USA
8832-000141 Rev E
©2008 Chief Manufacturing
www.chiefmfg.com
11/08
BEFORE YOU BEGIN
Horizontal Array Pole Clamp
Models: KTA-220/225 and KTA-320/325
The KTA-220/225 and KTA-320/325 pivot arrays allow
horizontal (yaw), vertical (pitch), and roll display
adjustment. The pitch adjustment range is 30° (15° up /
15° down).
The KTA is designed to mount two or three 17" displays.
The KTA accommodates standard VESA® 75mm/100mm
compliant displays.
KTA-220/225
KTA-320/325
CAUTION: To prevent damage to your display, which could affect or void the Factory warranty, thoroughly study all
instructions and illustrations before you begin to install the mount. Pay particular attention to the "Important Warnings
and Cautions" on Page 2.
CAUTION: The combined weight of the displays installed must not exceed 70 lbs (31.8 kg) for the KTA-220 and
KTA-225 and 90lbs (40.8 kg) for the KTA-320 and KTA-325, the maximum load capacity of the mounts. The weight of
each individual display must not exceed 35 lbs (15.9 kg) for the KTA-220 and KTA-225 or 30 lbs (13.6 kg) for the
KTA-320 and KTA-325.
Models: KTA-220/225 and KTA-320/325 Installation Instructions
2
• IMPORTANT WARNINGS AND CAUTIONS!
WARNING: A WARNING alerts you to the possibility of serious injury or death if you do not follow the instructions.
CAUTION: A CAUTION alerts you to the possibility of damage or destruction of equipment if you do not follow the
corresponding instructions.
WARNING: RISK OF ELECTRIC SHOCK ! Using the wrong screws could result in severe personal injury or damage
to your display. If your display uses a longer screw size than those included in the kit, DO NOT use the screws
provided with the kit. Use the screws provided with your display or contact the manufacturer.
WARNING: Improper installation can result in serious personal injury! Make sure that the mounting surface can
support a redundant weight factor five times the total weight of the equipment. If not, reinforce the mounting surface
structural members before installing the mount.
WARNING: Be aware of the potential for personal injury or damage to the unit if it is not adequately mounted.
WARNING: The installer is responsible for verifying that the mounting surface to which the KTA is anchored will
safely support the combined load of all attached components or other equipment.
WARNING: Watch for pinch points. Do not put your fingers between movable parts.
WARNING: Make sure the mount is correctly oriented.
WARNING: The combined weight of the displays installed must not exceed 70 lbs (31.8 kg) for the KTA-220 and
KTA-225 and 90lbs (40.8 kg) for the KTA-320 and KTA-325, the maximum load capacity of the mounts. The weight of
each individual display must not exceed 35 lbs (15.9 kg) for the KTA-220 and KTA-225 or 30 lbs (13.6 kg) for the
KTA-320 and KTA-325.
CAUTION: Check the unit for shipping damage before you begin the installation.
CONTENTS
IMPORTANT WARNINGS AND CAUTIONS!................... 2
TOOLS REQUIRED FOR INSTALLATION........................ 3
Parts................................................................................... 3
INSTALLATION ................................................................. 4
Display Installation ......................................................... 4
Attach Centris Head to Flush Mount Display.............. 4
Attach Centris Head to Recessed Mount Display....... 5
ADJUSTMENTS............................................................. 6
Array Adjustment............................................................ 6
Display Adjustment......................................................... 6
Display Horizontal Position Adjustment...................... 6
Display Pitch, Roll, and Yaw Adjustment.................... 6
Installation Instructions Models: KTA-220/225 and KTA-320/325
3
TOOLS REQUIRED FOR INSTALLATION
• Phillips screwdriver
• 3/16" Hex Key
• 5/32" Hex Key
NOTE: Other tools may be required depending on your
method of installation.
Parts
Unpack carton and verify kit contents . Read installation
instructions completely. If any listed parts are missing,
contact Chief Customer Service.
Table 1: Parts
ITEM DESCRIPTION QTY*
10 ARRAY ASSEMBLY, KTA-220/225 1
20 ARRAY ASSEMBLY, KTA-320/325 1
30 SCREW, Phillips Pan Head, M4 x 12mm 4
40 SCREW, Phillips Pan Head, M4 x 20mm 4
50 SCREW, Phillips Pan Head, M4 x 30mm 4
60 SPACER, Nylon, 3/8" (used with item 40) 4
70 SPACER, Nylon, 3/4" (used with item 50) 4
80 KEY, Hex, 5/32" 1
90 BRACKET, Pole Clamp, Back 1
100 SCREW, Button Head, 1/4-20 x3/4" 2
110 WASHER, Flat. 1/4" 2
* Quantity varies depending upon the number of displays being
mounted.
Figure 1: PARTS
10
20
30 50
60
70
80
40
110
90
100

Specyfikacje produktu

Marka: Chief
Kategoria: Wsparcie dla płaskich paneli
Model: KTA325B

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Chief KTA325B, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Wsparcie dla płaskich paneli Chief

Chief

Chief PFQUB Instrukcja

6 Października 2024
Chief

Chief MFQUB Instrukcja

5 Października 2024
Chief

Chief PFMUB Instrukcja

5 Października 2024
Chief

Chief K4G210B Instrukcja

23 Września 2024
Chief

Chief MF26000B Instrukcja

23 Września 2024
Chief

Chief FSB018BLK Instrukcja

23 Września 2024
Chief

Chief TPK1 Instrukcja

22 Września 2024
Chief

Chief PDR2612B Instrukcja

22 Września 2024
Chief

Chief CMA395 Instrukcja

22 Września 2024
Chief

Chief KTG225S Instrukcja

22 Września 2024

Instrukcje Wsparcie dla płaskich paneli

Najnowsze instrukcje dla Wsparcie dla płaskich paneli

NEC

NEC PDVWXUN 55 P Instrukcja

15 Października 2024
Insignia

Insignia NS-STV3N1705 Instrukcja

15 Października 2024
One For All

One For All DM 4110 Instrukcja

9 Października 2024
One For All

One For All DM 7220 Instrukcja

9 Października 2024
One For All

One For All DM 2220 Instrukcja

9 Października 2024
Kogan

Kogan KASMM39S12A Instrukcja

9 Października 2024
Kogan

Kogan KATWM70TLMA Instrukcja

9 Października 2024
Kogan

Kogan KADMM46G24A Instrukcja

9 Października 2024
Kogan

Kogan KADMMPCGASC Instrukcja

9 Października 2024
One For All

One For All DM 2210 Instrukcja

9 Października 2024