Instrukcja obsługi Chief Kontour KXC420

Chief Niesklasyfikowane Kontour KXC420

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Chief Kontour KXC420 (16 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/16
I N S T A L L A T I O N I N S T R U C T I O N S
Instrucciones de instalación
Installationsanleitung
Instruções de Instalação
Istruzioni di installazione
Installatie-instructies
Instructions d´installation
KXC220
KXC330
KXC420
KXC Flexlink™ Column Mounts
Spanish Product Description
German Product Description
Portuguese Product Description
Italian Product Description
Dutch Product Description
French Product Description
KXC Series
KXC Series Installation Instructions
2
DISCLAIMER
Legrand AV and its affiliated corporations and subsidiaries |
(collectively “Legrand AV”), intend to make this manual |
accurate and complete. However, Legrand AV makes no claim |
that the information contained herein covers all details,
conditions or variations, nor does it provide for every possible
contingency in connection with the installation or use of this
product. The information contained in this document is subject
to change without notice or obligation of any kind. Legrand AV |
makes no representation of warranty, expressed or implied,
regarding the information contained herein. Legrand AV |
assumes no responsibility for accuracy, completeness or
sufficiency of the information contained in this document.
DEFINITIONS
MOUNTING SYSTEM: A MOUNTING SYSTEM is the
primary Chief product to which an accessory and/or component
is attached.
ACCESSORY: AN ACCESSORY is the secondary Chief
product which is attached to a primary Chief product, and may
have a component attached or setting on it.
COMPONENT: A COMPONENT is an audiovisual item
designed to be attached or resting on an accessory or mounting
system such as a video camera, CPU, screen, display,
projector, etc.
WARNING: A WARNING alerts you to the possibility of
serious injury or death if you do not follow the instructions.
CAUTION: A CAUTION alerts you to the possibility of
damage or destruction of equipment if you do not follow the
corresponding instructions.
IMPORTANT SAFETY INSTRUCTIONS!
WARNING: Failure to read, thoroughly understand, and
follow all instructions can result in serious personal injury,
damage to equipment, or voiding of factory warranty! It is the
installer’s responsibility to make sure all mounting systems
are properly assembled and installed using the instructions
provided.
WARNING: Failure to provide adequate structural strength
for this mounting system can result in serious personal injury
or damage to equipment! It is the installer’s responsibility to
make sure the structure to which this mounting system is
attached can support five times the combined weight of all
equipment. Reinforce the structure as required before
installing the mounting system.
WARNING: Use this mounting system only for its intended
use as described in these instructions. Do not use
attachments not recommended by the manufacturer.
WARNING: Do not use this product outdoors.
WARNING: Never operate this mounting system if it is
damaged. Return the mounting system to a service center for
examination and repair.
WARNING: Exceeding the weight capacity can result in
serious personal injury or damage to equipment! It is the
installer’s responsibility to make sure the combined weight of
all components located between the K1C Series Monitor Arm
and the desk up to (and including) the display does not the
weight limits listed in the table below. Use with products
heavier than the maximum weight indicated may result in
collapse of the mount and its accessories causing possible
injury.
--SAVE THESE INSTRUCTIONS!--
MODEL Max Weight
Allowed for EACH
Max Weight
Capacity of
KXC220 25 lbs
(11.34 kg)
50 lbs
(22.68 kg)
KXC330 20 lbs
(9.07 kg)
60 lbs
(27.2 kg)
KXC420 20 lbs
(9.07 kg)
80 lbs
(36.3 kg)
Installation Instructions KXC Series
3
DIMENSIONS
KXC220
DESKTOP THICKNESS
RANGE
2.43
.43
61.8
11.0
DYNAMIC HEIGHT
ADJUST RANGE
18.81
5.81
477.8
147.6
INTERFACE
ROTATION
RANGE
90
MOUNTING PATTERN
COMPATIBILITY
100 X 100
75 X 75
UP
10
DOWN
KXC330
25.58
649.8
10.41
264.5
3.50 [88.9] COLUMN ADJUST
19.65
499.0
6.50 [165.1] DYNAMIC
HEIGHT ADJUST
3.50 [88.9] COLUMN ADJUST
23.69
601.6
14.47
367.6
INTERFACE ROTATION
RANGE
90
MOUNTING PATTERN
COMPATIBILITY
100 X 100
75 X 75
DESKTOP
THICKNESS
RANGE
2.50
0.50
63.6
12.8
3.69
93.7
TILT RANGE
75
UP
10
DOWN
DYNAMIC LIT ARM
LENGTH RANGE
STRAIGHT = MAX
10.21
7.12
259.3
180.8
6.75
171.5
6.75
171.5
1.88
47.6

Specyfikacje produktu

Marka: Chief
Kategoria: Niesklasyfikowane
Model: Kontour KXC420

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Chief Kontour KXC420, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Niesklasyfikowane Chief

Chief

Chief PACPC1 Instrukcja

3 Stycznia 2025
Chief

Chief CSA100 Instrukcja

3 Stycznia 2025
Chief

Chief CMA480W Instrukcja

1 Stycznia 2025
Chief

Chief DVM27U3 Instrukcja

31 Grudnia 2025
Chief

Chief PAC527FW-KIT Instrukcja

31 Grudnia 2025
Chief

Chief DVM27U4E Instrukcja

31 Grudnia 2025
Chief

Chief DVM27U4 Instrukcja

31 Grudnia 2025
Chief

Chief DVM27U2 Instrukcja

31 Grudnia 2025
Chief

Chief DVM27U3E Instrukcja

31 Grudnia 2025
Chief

Chief DVM27U2E Instrukcja

31 Grudnia 2025

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

GBC

GBC ThermaBind T500Pro Instrukcja

15 Stycznia 2025
Da-Lite

Da-Lite Parallax 29850 Instrukcja

15 Stycznia 2025
Crivit

Crivit IAN 290909 Instrukcja

15 Stycznia 2025
Tripp Lite

Tripp Lite SmartRack SRW12US Instrukcja

15 Stycznia 2025
Powerfix

Powerfix IAN 280221 Instrukcja

15 Stycznia 2025
AGM

AGM Rattler TC35-640 Instrukcja

15 Stycznia 2025
AGM

AGM Wolf-7 Pro Instrukcja

15 Stycznia 2025
AGM

AGM Anaconda TC50-640 Instrukcja

15 Stycznia 2025
AGM

AGM Secutor Pro TS50-640 Instrukcja

15 Stycznia 2025
Microchip

Microchip AT91SAM9M11 Instrukcja

15 Stycznia 2025