Instrukcja obsługi Chief KBD-S2S-19C

Chief nieskategoryzowany KBD-S2S-19C

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Chief KBD-S2S-19C (4 stron) w kategorii nieskategoryzowany. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/4
I N S T A L L A T I O N I N S T R U C T I O N S
Under-desk Keyboard Trays
Spanish Product Description
German Product Description
Portuguese Product Description
Italian Product Description
Dutch Product Description
French Product Description
KBD-XXX-19C
KBD-XXX-19C Installation Instructions
2
DISCLAIMER
Milestone AV Technologies and its affiliated corporations and
subsidiaries (collectively “Milestone”), intend to make this
manual accurate and complete. However, Milestone makes no
claim that the information contained herein covers all details,
conditions or variations, nor does it provide for every possible
contingency in connection with the installation or use of this
product. The information contained in this document is subject
to change without notice or obligation of any kind. Milestone
makes no representation of warranty, expressed or implied,
regarding the information contained herein. Milestone assumes
no responsibility for accuracy, completeness or sufficiency of
the information contained in this document.
Chief® is a registered trademark of Milestone AV Technologies.
All rights reserved.
DEFINITIONS
MOUNTING SYSTEM: A MOUNTING SYSTEM is the
primary Chief product to which an accessory and/or component
is attached.
ACCESSORY: AN ACCESSORY is the secondary Chief
product which is attached to a primary Chief product, and may
have a component attached or setting on it.
COMPONENT: A COMPONENT is an audiovisual item
designed to be attached or resting on an accessory or mounting
system such as a video camera, CPU, screen, display,
projector, etc.
WARNING: A WARNING alerts you to the possibility of
serious injury or death if you do not follow the instructions.
CAUTION: A CAUTION alerts you to the possibility of
damage or destruction of equipment if you do not follow the
corresponding instructions.
IMPORTANT SAFETY INSTRUCTIONS
WARNING: Failure to read, thoroughly understand, and
follow all instructions can result in serious personal injury,
damage to equipment, or voiding of factory warranty! It is the
installer’s responsibility to make sure all mounting systems
are properly assembled and installed using the instructions
provided.
WARNING: Failure to provide adequate structural strength
for this mounting systems can result in serious personal injury
or damage to equipment! It is the installer’s responsibility to
make sure the structure to which this mounting system is
attached can support five times the combined weight of all
equipment. Reinforce the structure as required before
installing the mounting system.
WARNING: Exceeding the weight capacity can result in
serious personal injury or damage to equipment! It is the
installer’s responsibility to make sure the combined weight of
all components attached to mounting system does not
exceed 10 lbs (4.5 kg).
WARNING: Use this mounting system only for its intended
use as described in these instructions. Do not use
attachments not recommended by the manufacturer.
WARNING: Never operate this mounting system if it is
damaged. Return the mounting system to a service center for
examination and repair.
WARNING: Do not use this mounting system outdoors.
WARNING: RISK OF INJURY TO PERSONS! Do not use
this mounting system / accessory to support video equipment
such as televisions or computer monitors.
--SAVE THESE INSTRUCTIONS--
DIMENSIONS
Installation Instructions KBD-XXX-19C
3
TOOLS REQUIRED FOR INSTALLATION/PARTS
A (1)
[Keyboard tray]
B (4)
#10-24
3/8"
Assembly And Installation
1. Use four #10-24 hex nuts (B) to secure keyboard tray (A) to
keyboard mechanism (not included). (See Figure 1)
Figure 1
2. Place keyboard on tray and adjust tray depth using red lever
under tray so that the keyboard is secured. (See Figure 2)
Figure 2
Mouse Arm Adjustments
1. Mouse arm length may be adjusted as desired or moved the
opposite side for left-handed users. (See Figure 3)
Figure 3
(B) x 4
1
(underside view)
1a
1b
1c
1d
Left-handed conversion

Specyfikacje produktu

Marka: Chief
Kategoria: nieskategoryzowany
Model: KBD-S2S-19C

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Chief KBD-S2S-19C, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje nieskategoryzowany Chief

Chief

Chief FCA813 Instrukcja

16 Września 2024
Chief

Chief FCAXV1U Instrukcja

16 Września 2024
Chief

Chief PAC525 Instrukcja

16 Września 2024
Chief

Chief FHB5033 Instrukcja

16 Września 2024
Chief

Chief FMSSCSM Instrukcja

16 Września 2024
Chief

Chief FCA803 Instrukcja

16 Września 2024
Chief

Chief JHS210B Instrukcja

27 Maja 2024
Chief

Chief Mini RPA Elite RSMB354 Instrukcja

27 Maja 2024
Chief

Chief CSSLP15X10 Instrukcja

25 Maja 2024
Chief

Chief KRA231 Instrukcja

24 Maja 2024

Instrukcje nieskategoryzowany

Najnowsze instrukcje dla nieskategoryzowany

Asko

Asko DBI644MIB.S.TW/1 Instrukcja

28 Października 2024
Asko

Asko DFS233IB.S.TW/1 Instrukcja

28 Października 2024
Emko

Emko EZM-9920 Instrukcja

27 Października 2024
Emko

Emko ESM-3712-H Instrukcja

27 Października 2024
Emko

Emko ATS-10 Instrukcja

27 Października 2024
Emko

Emko EAOM-11.2 Instrukcja

27 Października 2024
Emko

Emko EPM-3790 Instrukcja

27 Października 2024
Emko

Emko EPM-7790 Instrukcja

27 Października 2024
Livarno Lux

Livarno Lux IAN 108340 Instrukcja

27 Października 2024
Livarno Lux

Livarno Lux HG06009A-BS Instrukcja

27 Października 2024