Instrukcja obsługi Chief K3G120B

Chief Wsparcie dla płaskich paneli K3G120B

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Chief K3G120B (16 stron) w kategorii Wsparcie dla płaskich paneli. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/16
I N S T A L L A T I O N I N S T R U C T I O N S
Instrucciones de instalación
Installationsanleitung
Instruções de Instalação
Istruzioni di installazione
Installatie-instructies
Instructions d´installation
K3F120
K3F220
K3G310
K3G120 K3G220
Kontour™ Array Arm Series
Spanish Product Description
German Product Description
Portuguese Product Description
Italian Product Description
Dutch Product Description
French Product Description
K3 Series
K3 Series Installation Instructions
2
DISCLAIMER
Milestone AV Technologies and its affiliated corporations and
subsidiaries (collectively "Milestone"), intend to make this
manual accurate and complete. However, Milestone makes no
claim that the information contained herein covers all details,
conditions or variations, nor does it provide for every possible
contingency in connection with the installation or use of this
product. The information contained in this document is subject
to change without notice or obligation of any kind. Milestone
makes no representation of warranty, expressed or implied,
regarding the information contained herein. Milestone assumes
no responsibility for accuracy, completeness or sufficiency of
the information contained in this document.
Chief® is a registered trademark of Milestone AV Technologies.
All rights reserved.
IMPORTANT SAFETY INSTRUCTIONS
WARNING: A WARNING alerts you to the possibility of
serious injury or death if you do not follow the instructions.
CAUTION: A CAUTION alerts you to the possibility of
damage or destruction of equipment if you do not follow the
corresponding instructions.
WARNING: Failure to read, thoroughly understand, and
follow all instructions can result in serious personal injury,
damage to equipment, or voiding of factory warranty! It is the
installer’s responsibility to make sure all components are
properly assembled and installed using the instructions
provided.
WARNING: Failure to provide adequate structural strength
for this component can result in serious personal injury or
damage to equipment! It is the installer’s responsibility to
make sure the structure to which this component is attached
can support five times the combined weight of all equipment.
Reinforce the structure as required before installing the
component.
WARNING: Exceeding the weight capacity can result in
serious personal injury or damage to equipment! It is the
installer’s responsibility to make sure the combined weight of
all components located on the K3 Series mount up to (and
including) the display does not exceed 15 lbs (6.8 kg) per
display for the K3F220, K3G220 and K3G310 mounts or 25
lbs (11.34 kg) per display for the K3F120 and K3G120
mounts.
WARNING: Use this mounting system only for its intended
use as described in these instructions. Do not use
attachments not recommended by the manufacturer.
WARNING: The K3F120 and K3F220 mounting systems
are intended for table top mounting ONLY!
WARNING: Never operate this mounting system if it is
damaged. Return the mounting system to a service center for
examination and repair.
WARNING: Do not use this product outdoors.
--SAVE THESE INSTRUCTIONS--
Installation Instructions K3 Series
3
DIMENSIONS
25.62
650.7
MAX. DISTANCE
BETWEEN MONITORS
18.291
464.5
MAX. MONITOR CENTER
HEIGHT FROM SURFACE
449.8
BETWEEN MONITORS
17.71
MIN. DISTANCE
1420.6
55.93
1.77
45.0
15°
MAX ANGLE
+/-12
TILT ADJUSTMENT
INTERFACES
75 X 75
COMPATIBLE
+/-12
TILT ADJUSTMENT
VESA
100 X 100
TILT ADJUSTMENT
+/-10
7.55
191.8
2.43
WIDTH
COLUMN
61.6
0.25
6.4
BASE THICKNESS
4.94
125.5
MAX.
SURFACE
DEPTH
30.6
1.21
2.27
57.7
DEPTH
20.87
530.0
7.03
178.5
2.28
57.9
K3G310
464.7
18.29
921.9
MAX. MONITOR
CENTER HEIGHT
36.29
FROM SURFACE
TILT ADJUSTMENT
+/-10 DEGREES
VESA
100 X 100
75 X 75
COMPATIBLE
576.0
22.68
2.43
COLUMN WIDTH
61.6
0.31
7.9
BASE
THICKNESS
3.19
2.27
57.7
COLUMN
DEPTH
30.6
1.21
81.0
393.6
15.50
39.06
992.2
K3F120

Specyfikacje produktu

Marka: Chief
Kategoria: Wsparcie dla płaskich paneli
Model: K3G120B

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Chief K3G120B, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Wsparcie dla płaskich paneli Chief

Chief

Chief TS218SU Instrukcja

9 Grudnia 2024
Chief

Chief PFQUB Instrukcja

6 Października 2024
Chief

Chief MFQUB Instrukcja

5 Października 2024
Chief

Chief PFMUB Instrukcja

5 Października 2024
Chief

Chief K4G210B Instrukcja

23 Września 2024
Chief

Chief MF26000B Instrukcja

23 Września 2024
Chief

Chief FSB018BLK Instrukcja

23 Września 2024
Chief

Chief TPK1 Instrukcja

22 Września 2024
Chief

Chief PDR2612B Instrukcja

22 Września 2024
Chief

Chief CMA395 Instrukcja

22 Września 2024

Instrukcje Wsparcie dla płaskich paneli

Najnowsze instrukcje dla Wsparcie dla płaskich paneli

Rocstor

Rocstor Y10N027-B1 Instrukcja

11 Grudnia 2024
StarTech.com

StarTech.com ARMQUADSS Instrukcja

10 Grudnia 2024
CTA Digital

CTA Digital ADD-AVPMB Instrukcja

10 Grudnia 2024
Gabor

Gabor FPC-85 Instrukcja

10 Grudnia 2024
Gabor

Gabor FPS-L Instrukcja

10 Grudnia 2024
Gabor

Gabor TM-UL Instrukcja

10 Grudnia 2024
Kanto

Kanto FMX2 Instrukcja

9 Grudnia 2024
Gabor

Gabor FSM-L Instrukcja

9 Grudnia 2024
Dell

Dell MDS19 Instrukcja

8 Grudnia 2024
Proaim

Proaim CT-SDCF-PRO Instrukcja

7 Grudnia 2024