Instrukcja obsługi Chief FSD-3

Chief Niesklasyfikowane FSD-3

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Chief FSD-3 (4 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/4
I N S T A L L A T I O N I N S T R U C T I O N S
Instrucciones de instalación
Installationsanleitung
Instruções de Instalação
Istruzioni di installazione
Installatie-instructies
Instructions d´installation
FSD-2
FSD-3
FSD-4
Rack Drawer
Spanish Product Description
German Product Description
Portuguese Product Description
Italian Product Description
Dutch Product Description
French Product Description
FSD SERIES
FSD SERIES Installation Instructions
2
DISCLAIMER
Milestone AV Technologies and its affiliated corporations and
subsidiaries (collectively "Milestone"), intend to make this
manual accurate and complete. However, Milestone makes no
claim that the information contained herein covers all details,
conditions or variations, nor does it provide for every possible
contingency in connection with the installation or use of this
product. The information contained in this document is subject
to change without notice or obligation of any kind. Milestone
makes no representation of warranty, expressed or implied,
regarding the information contained herein. Milestone assumes
no responsibility for accuracy, completeness or sufficiency of
the information contained in this document.
Chief® is a registered trademark of Milestone AV Technologies.
All rights reserved.
DEFINITIONS
MOUNTING SYSTEM: A MOUNTING SYSTEM is the
primary Chief product to which an accessory and/or component
is attached.
ACCESSORY: AN ACCESSORY is the secondary Chief
product which is attached to a primary Chief product, and may
have a component attached or setting on it.
COMPONENT: A COMPONENT is an audiovisual item
designed to be attached or resting on an accessory or mounting
system such as a video camera, CPU, screen, display,
projector, etc.
WARNING: A WARNING alerts you to the possibility of
serious injury or death if you do not follow the instructions.
CAUTION: A CAUTION alerts you to the possibility of
damage or destruction of equipment if you do not follow the
corresponding instructions.
IMPORTANT SAFETY INSTRUCTIONS
WARNING: Failure to read, thoroughly understand, and
follow all instructions can result in serious personal injury,
damage to equipment, or voiding of factory warranty! It is the
installer’s responsibility to make sure all mounting systems/
accessories are properly assembled and installed using the
instructions provided.
WARNING: Failure to provide adequate structural strength
for this accessory can result in serious personal injury or
damage to equipment! It is the installer’s responsibility to
make sure the structure to which this accessory is attached
can support five times the combined weight of all equipment.
Reinforce the structure as required before installing the
accessory.
WARNING: Exceeding the weight capacity can result in
serious personal injury or damage to equipment! It is the
installer’s responsibility to make sure the combined weight of
all components located within the FSD Series rack up does
not exceed 30 lbs (13.6 kg).
WARNING: Use this accessory only for its intended use as
described in these instructions. Do not use attachments not
recommended by the manufacturer.
WARNING: Never operate this accessory if it is damaged.
Return the accessory to a service center for examination and
repair.
WARNING: Do not use this product outdoors.
--SAVE THESE INSTRUCTIONS--
DIMENSIONS
(A)
(B)
(C)
(E)
(D)
FSD-2
MODEL HEIGHT (A) USABLE WIDTH (B) DEPTH (C) USABLE DEPTH (D) EXTENDED DEPTH (E)
FSD-2 3.50 [89]
15.88 [403] 13.94 [354] 13.00 [330] 28.59 [726]
FSD-3
5.25 [133]
FSD-4
7.00 [178]
Installation Instructions FSD SERIES
3
TOOLS / PARTS FOR INSTALLATION
#2
A (1)
[FSD drawer]
B (4)
[#10-32 x 3/4"
(not included)
(FSD-3 shown)
screw w/washer]
ASSEMBLY AND INSTALLATION
1. Determine mounting position on rack.
2. Use four Phillips screws with washers (B) (not included) to
secure FSD Series rack drawer (A) to rack at desired
mounting location. (See Figure 1)
NOTE: Screws to be used are #10-32 x 3/4" Phillips half dog
point screws with pre-installed washers.
Figure 1
3. Open rack vault and install desired components.
WARNING: Exceeding the weight capacity can result in
serious personal injury or damage to equipment! It is the
installer’s responsibility to make sure the combined weight of
all components located within the FSD Series rack drawer up
does not exceed 30 lbs (13.6 kg).
2
(B) x 4
rack (example)
(A)

Specyfikacje produktu

Marka: Chief
Kategoria: Niesklasyfikowane
Model: FSD-3

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Chief FSD-3, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Niesklasyfikowane Chief

Chief

Chief PACPC1 Instrukcja

3 Stycznia 2025
Chief

Chief CSA100 Instrukcja

3 Stycznia 2025
Chief

Chief CMA480W Instrukcja

1 Stycznia 2025
Chief

Chief DVM27U3 Instrukcja

31 Grudnia 2025
Chief

Chief PAC527FW-KIT Instrukcja

31 Grudnia 2025
Chief

Chief DVM27U4E Instrukcja

31 Grudnia 2025
Chief

Chief DVM27U4 Instrukcja

31 Grudnia 2025
Chief

Chief DVM27U2 Instrukcja

31 Grudnia 2025
Chief

Chief DVM27U3E Instrukcja

31 Grudnia 2025
Chief

Chief DVM27U2E Instrukcja

31 Grudnia 2025

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

GBC

GBC ThermaBind T500Pro Instrukcja

15 Stycznia 2025
Da-Lite

Da-Lite Parallax 29850 Instrukcja

15 Stycznia 2025
Crivit

Crivit IAN 290909 Instrukcja

15 Stycznia 2025
Tripp Lite

Tripp Lite SmartRack SRW12US Instrukcja

15 Stycznia 2025
Powerfix

Powerfix IAN 280221 Instrukcja

15 Stycznia 2025
AGM

AGM Rattler TC35-640 Instrukcja

15 Stycznia 2025
AGM

AGM Wolf-7 Pro Instrukcja

15 Stycznia 2025
AGM

AGM Anaconda TC50-640 Instrukcja

15 Stycznia 2025
AGM

AGM Secutor Pro TS50-640 Instrukcja

15 Stycznia 2025
Microchip

Microchip AT91SAM9M11 Instrukcja

15 Stycznia 2025