Instrukcja obsługi Chief FSB4101S


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Chief FSB4101S (4 stron) w kategorii Wsparcie dla płaskich paneli. Ta instrukcja była pomocna dla 8 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/4
I N S T A L L A T I O N I N S T R U C T I O N S
CHIEF MANUFACTURING INC.
1-800-582-6480 952-894-6280 FAX 952-894-6918
8401 EAGLE CREEK PARKWAY, STE 700
SAVAGE, MINNESOTA 55378 USA
PART NO. 8804-000034 (Rev. E)
©2005 Chief Manufacturing
www.chiefmfg.com
Printed in USA 09/05
Model FSB-4101
INTERFACE BRACKET
VESA 200mm x 100mm / 100mm x 100mm
BEFORE YOU BEGIN
Prior to assembly, unpack carton completely and verify contents.
If you are missing any of the following components, or you have any questions about this installation, contact Chief
Manufacturing Customer Service at 1-800/582-6480
Model FSB-4101 Installation Instructions
2
WARNING: FLAT PANEL DISPLAYS ARE
EXTREMELY FRAGILE. If Display Uses a Screw Size
Other Than M4, DO NOT USE M4 Screws provided.
Monitor Damage Could Occur.
ITEM DESCRIPTION QTY.
10 Interface Bracket 1
20 3/8" Nylon Spacers 6
30 3/4" Nylon Spacers 6
40 1/8" Nylon Spacers 6
50 M4 X 12mm Phillips Pan Head Screws 6
60 M4 X 20mm Phillips Pan Head Screws 6
70 M4 X 30mm Phillips Pan Head Screws 6
80 M4 X 6mm Phillips Pan Head Screws 6
Figure 1:
80 30 70 20 60 40 50 10
Installation Instructions Model FSB-4101
3
NOTE: If the flat panel display has a table stand
attached, remove existing stand.
Flush Mount Installation
1. Secure the Interface Bracket to the Display using 1/8"
Nylon Spacers and M4 x 12mm screws
(see Figure 2).
NOTE: Length of mounting screws is dependant
upon length of spacer used.
Figure 2:
Recessed Mount Installation
1. Place four Nylon spacers (3/8" or 3/4" as necessary)
over four mounting holes in Display (see Figure 3).
2. Secure the Interface Bracket to the Display using M4
x 20mm or M4 x 30mm screws depending upon
spacer used. (see Figure 3).
Figure 3:
Mount to Q2 System
1. Install flat panel display, with interface plate attached,
on Q2 mount (see Figure 4).
2. Move latching flag of Q2 mount to secure display.
Figure 4:
Conversion to VESA 75mm Mounting/Centri
Mounts
1. Remove Phillips head screws and mounting buttons
from the interface bracket.
Figure 5:
2. Using M4 x 6mm screws, attach the interface bracket
to any VESA 75mm x 75mm mounting device.
Display
Interface
Bracket
1/8" Nylon Spacers (6)
M4 x 12mm Screws(6)
Display
Interface
Bracket
3/8" or 3/4" Nylon Spacers(6)
M4 x 20mm Screws(6)
M4 x 30mm Screws(6)
Display
Interface
Bracket
Q2 Mount
Latching Flag
Display
Interface
Bracket
Mounting Button
Phillips Head
Screw (4)
VESA Mount


Specyfikacje produktu

Marka: Chief
Kategoria: Wsparcie dla płaskich paneli
Model: FSB4101S

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Chief FSB4101S, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Wsparcie dla płaskich paneli Chief

Chief

Chief RSA213 Instrukcja

28 Grudnia 2024
Chief

Chief RPA640 Instrukcja

28 Grudnia 2024
Chief

Chief RPMA204 Instrukcja

28 Grudnia 2024
Chief

Chief K1D120BXDL Instrukcja

28 Grudnia 2024
Chief

Chief TS218SU Instrukcja

9 Grudnia 2024
Chief

Chief PFQUB Instrukcja

6 Października 2024
Chief

Chief MFQUB Instrukcja

5 Października 2024
Chief

Chief PFMUB Instrukcja

5 Października 2024
Chief

Chief K4G210B Instrukcja

23 Września 2024
Chief

Chief MF26000B Instrukcja

23 Września 2024

Instrukcje Wsparcie dla płaskich paneli

Najnowsze instrukcje dla Wsparcie dla płaskich paneli