Instrukcja obsługi Chief CMA395
Chief
Flat panel steun
CMA395
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Chief CMA395 (7 stron) w kategorii Flat panel steun. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/7
I N S T A L L A T I O N I N S T R U C T I O N S
Instrucciones de instalación
Installationsanleitung
Instruções de Instalação
Istruzioni di installazione
Installatie-instructies
Instructions d´installation
Angled Ceiling Adapter
Spanish Product Description
German Product Description
Portuguese Product Description
Italian Product Description
Dutch Product Description
French Product Description
CMA395
CMA395 Installation Instructions
2
DISCLAIMER
Milestone AV Technologies and its affiliated corporations and
subsidiaries (collectively "Milestone"), intend to make this
manual accurate and complete. However, Milestone makes no
claim that the information contained herein covers all details,
conditions or variations, nor does it provide for every possible
contingency in connection with the installation or use of this
product. The information contained in this document is subject
to change without notice or obligation of any kind. Milestone
makes no representation of warranty, expressed or implied,
regarding the information contained herein. Milestone assumes
no responsibility for accuracy, completeness or sufficiency of
the information contained in this document.
Chief® is a registered trademark of Milestone AV Technologies.
All rights reserved.
DEFINITIONS
WARNING: A WARNING alerts you to the possibility of
serious injury or death if you do not follow the instructions.
CAUTION: A CAUTION alerts you to the possibility of
damage or destruction of equipment if you do not follow the
corresponding instructions.
MOUNTING SYSTEM: A MOUNTING SYSTEM is the
primary product designed by Chief® to mount the projector or
display.
ACCESSORY: An ACCESSORY is any product designed by
Chief® to complement the primary mounting system either by
mounting any supporting components or enhancing the
mounting capabilities of the primary mounting system.
COMPONENT: A COMPONENT is any secondary product to
be mounted to an accessory, i.e. speakers, CPU’s, cameras,
tablets, additional displays.
IMPORTANT SAFETY INSTRUCTIONS!
WARNING: Failure to read, thoroughly understand, and
follow all instructions can result in serious personal injury,
damage to equipment, or voiding of factory warranty! It is the
installer’s responsibility to make sure all mounting systems/
accessories are properly assembled and installed using the
instructions provided.
WARNING: Failure to provide adequate structural strength
for this accessory can result in serious personal injury or
damage to equipment! It is the installer’s responsibility to
make sure the structure to which this accessory is attached
can support five times the combined weight of all equipment.
Reinforce the structure as required before installing the
accessory.
WARNING: Exceeding the weight capacity can result in
serious personal injury or damage to equipment! It is the
installer’s responsibility to make sure the maximum weight
installed on the ceiling plate does not exceed 500 lbs
(226.8 kg).
• The weight capacity of the CMA395 may be LIMITED
to the lowest weight capacity of any other mounting
system or accessory located between the CMA395 and
the projector/display.
WARNING: Use this accessory only for its intended use as
described in these instructions. Do not use attachments not
recommended by the manufacturer.
WARNING: Never operate this accessory if it is damaged.
Return the mounting system to a service center for
examination and repair.
WARNING: Do not use this product outdoors.
IMPORTANT ! : The CMA395 must be attached to
ceiling using two 3/8 x 2 1/2" lag bolts and 3/8" washers
(not included).
NOTE: The CMA395 is designed to be mounted to 2" x 4" or
larger wood stud joists. By using any length of 1-1/2"
NPT following ANSI/ASME B1.20.1 (Schedule 40,
0.154" minimum thickness aluminum - ASTM B221)
threaded extension column with both ends threaded
(not included), the height capabilities may be extended
as needed.
NOTE: The CMA395 may be used with the UL Listed CMS
Extension Column series; LCM2X2U, LCM2X2UP,
LCM3X2U, LCM3X2UP and LCM3X3U ceiling
mounted video walls; and the UL Listed LCM1U,
LCM1UP, LCM2X1U, LCM2X1UP, LCM3X1U,
LCM3X1UP, LCM5X1U, MCM1U, XCM1U, XCM7000,
LCB1U, LCB1UP, LCB1X2U, LCB2X1U, LCB2X1UP,
MCB1U, MCB1X2U, XCB1U, XCB7000, FCA3U and
FCA4U (not included).
NOTE: The LCM2X2U, LCM2X2UP, LCM3X1U, LCM3X1UP,
LCM3X2U, LCM3X2UP, and LCM3X3U require 2
CMA395 ceiling plates (not included). The LCM5X1U
requires 3 CMA395 ceiling plates (not included).
Installation Instructions CMA395
3
DIMENSIONS
TOOLS / PARTS FOR INSTALLATION
5/16 - 18 UNC THREADS
1 1/2" NPT THREADS
112.713
4.44
MAX HEIGHT
90.00°
95.00°
100.00°
41.275
1.63
.44
5/32"
(Included)
A (1)
B (1)
5/32"
[CMA395 assembly]
3/4"
9/16"
C (1)
5/16-18 x 3/8"
Specyfikacje produktu
| Marka: | Chief |
| Kategoria: | Flat panel steun |
| Model: | CMA395 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Chief CMA395, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Flat panel steun Chief
22 Września 2024
22 Września 2024
22 Września 2024
22 Września 2024
22 Września 2024
21 Września 2024
21 Września 2024
21 Września 2024
21 Września 2024
21 Września 2024
Instrukcje Flat panel steun
- Flat panel steun Iiyama
- Flat panel steun HP
- Flat panel steun Icy Box
- Flat panel steun Pyle
- Flat panel steun NEC
- Flat panel steun Vogel's
- Flat panel steun 3M
- Flat panel steun Hitachi
- Flat panel steun Newstar
- Flat panel steun Reflecta
- Flat panel steun Techly
- Flat panel steun Da-Lite
- Flat panel steun Luxor
- Flat panel steun Steren
- Flat panel steun Barkan
- Flat panel steun Atlantic
- Flat panel steun Konig
- Flat panel steun HQ
- Flat panel steun BakkerElkhuizen
- Flat panel steun Peerless
- Flat panel steun SMS Smart Media Solutions
- Flat panel steun Monoprice
- Flat panel steun Atdec
- Flat panel steun Premier Mounts
- Flat panel steun Cabstone
- Flat panel steun SmartMetals
Najnowsze instrukcje dla Flat panel steun
22 Września 2024
22 Września 2024
21 Września 2024
21 Września 2024
21 Września 2024
21 Września 2024
21 Września 2024
20 Września 2024
20 Września 2024
20 Września 2024