Instrukcja obsługi Chief CMA290


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Chief CMA290 (4 stron) w kategorii Wsparcie dla płaskich paneli. Ta instrukcja była pomocna dla 7 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/4
I N S T A L L A T I O N I N S T R U C T I O N S
Cable Lock Accessory
CMA290
CMA290 Installation Instructions
2
DISCLAIMER
CSAV, Inc., and its affiliated corporations and subsidiaries
(collectively, "CSAV"), intend to make this manual accurate and
complete. However, CSAV makes no claim that the information
contained herein covers all details, conditions or variations, nor
does it provide for every possible contingency in connection
with the installation or use of this product. The information
contained in this document is subject to change without notice
or obligation of any kind. CSAV makes no representation of
warranty, expressed or implied, regarding the information
contained herein. CSAV assumes no responsibility for
accuracy, completeness or sufficiency of the information
contained in this document.
TOOLS REQUIRED FOR INSTALLATION
A (10)
PARTS
Installation Instructions CMA290
3
Installation
The CMA-290 cable lock may be used with either a 1/8" or
3/16" 7x19 wire rope.
CAUTION: The 1/8" 7x19 wire rope is rated to 250 lb
(113.40 kg). The 3/16" 7x19 wire rope is rated to 640 lb
(290.30 kg). It is the installer’s responsibility to ensure that
the weight ratings of the cable lock system are not exceeded.
Figure 1
NOTE: (Optional) Melt lead-free solder on end of cable to
prevent unraveling.
1. Feed the cable into the cable lock, being sure to push the
release button in direction of arrow printed on lock.
(See Figure 1)
2. Loop the cable back through a locking channel and pull at
least 6 inches of wire rope through, pushing the release
button in the direction of arrow on lock. (See Figure 1)
Figure 2
3. Pass wire tail from Step 1 back through the remaining
locking channel (See Figure 2).
Unlocking the Cable Lock
To unlock the cable lock:
1. Remove load from cable and cable lock.
2. Push release button in direction of arrow on cable lock.
3. Move cable freely.
1
Release
Button
2
3


Specyfikacje produktu

Marka: Chief
Kategoria: Wsparcie dla płaskich paneli
Model: CMA290

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Chief CMA290, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Wsparcie dla płaskich paneli Chief

Chief

Chief PWCU Instrukcja

16 Stycznia 2025
Chief

Chief MIWRFUB Instrukcja

16 Stycznia 2025
Chief

Chief MWRIWUB Instrukcja

16 Stycznia 2025
Chief

Chief KPP110B Instrukcja

16 Stycznia 2025

Instrukcje Wsparcie dla płaskich paneli

Najnowsze instrukcje dla Wsparcie dla płaskich paneli