Instrukcja obsługi Chief CMA151


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Chief CMA151 (2 stron) w kategorii Wsparcie dla płaskich paneli. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/2
I N S T A L L A T I O N I N S T R U C T I O N S
CHIEF MANUFACTURING INC.
1-800-582-6480 952-894-6280 FAX 952-894-6918
8401 EAGLE CREEK PARKWAY, STE 700
SAVAGE, MINNESOTA 55378 USA
8803-000073 Rev A
2006 Chief Manufacturing
www.chiefmfg.com
02/06
BEFORE YOU BEGIN
1-1/2" to 1" NPT Adapter Accessory
Model: CMA-151
Specifications:
Adapts a 1-1/2" NPT threaded fitting to a 1" NPT
threaded column.
Intended for use with Chief CMA Series
accessories and RPA Series mounts.
NOTE: U.L. listed assemblies require the use of U.L.
listed components.
Weight capacity of 250 lbs (113 kg).
WARNING: It is the installer’s responsibility to make sure all components are properly assembled and installed
using the instructions provided. Failure to read, thoroughly understand, and follow all instructions can result in
serious personal injury, damage to equipment, or voiding of factory warranty.
If you have any questions about this these instructions or your specific installation, contact Chief Manufacturing
at 1-800-582-6480 or 952-894-6280.
Model: CMA-151 Installation Instructions
2
IMPORTANT WARNINGS AND CAUTIONS!
WARNING: A WARNING alerts you to the possibility of serious injury or death if you do not follow the instructions.
CAUTION: A CAUTION alerts you to the possibility of damage or destruction of equipment if you do not follow the
corresponding instructions.
WARNING: Exceeding the weight capacity can result in serious personal injury or damage to equipment! It is the
installer’s responsibility to make sure the combined weight of all components located between the CMA-151 up to
(and including) the display/projector does not exceed 250 lbs (113 kg).
The weight capacity of the CMA-151 may be LIMITED to the lowest weight capacity of any other component
located between the CMA-151 and the supporting structure!
DIMENSIONS
TOOLS REQUIRED FOR INSTALLATION
Pipe Wrench
NOTE: Other tools may be required depending on your
method of installation.
PARTS
After unpacking carton, inspect and verify contents (See
Figure 1). If any listed parts are missing or damaged,
contact Chief Customer Service at 1-800-582-6480.
Figure 1: Parts
INSTALLATION
1. Screw adapter (10) onto 1" NPT threaded column by
hand.
2. Screw 1" NPT threaded column, with adapter (10),
into 1-1/2" NPT threaded fitting. Tighten securely
using pipe wrench.
Table 1: Parts
Item Description Qty
10 Adapter, 1-1/2" to 1" NPT 1
COLUMN, Threaded, 1" NPT
(required, not supplied)
1
FITTING, Threaded, 1-1/2" NPT
(required, not supplied)
1
10


Specyfikacje produktu

Marka: Chief
Kategoria: Wsparcie dla płaskich paneli
Model: CMA151

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Chief CMA151, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Wsparcie dla płaskich paneli Chief

Chief

Chief RSA213 Instrukcja

28 Grudnia 2024
Chief

Chief RPA640 Instrukcja

28 Grudnia 2024
Chief

Chief RPMA204 Instrukcja

28 Grudnia 2024
Chief

Chief K1D120BXDL Instrukcja

28 Grudnia 2024
Chief

Chief TS218SU Instrukcja

9 Grudnia 2024
Chief

Chief PFQUB Instrukcja

6 Października 2024
Chief

Chief MFQUB Instrukcja

5 Października 2024
Chief

Chief PFMUB Instrukcja

5 Października 2024
Chief

Chief K4G210B Instrukcja

23 Września 2024
Chief

Chief MF26000B Instrukcja

23 Września 2024

Instrukcje Wsparcie dla płaskich paneli

Najnowsze instrukcje dla Wsparcie dla płaskich paneli