Instrukcja obsługi Chief CMA-440

Chief Niesklasyfikowane CMA-440

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Chief CMA-440 (8 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 7 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/8
CMA-440 Light Weight
Suspended Ceiling Kit
The CMA-440 Light Weight Suspended Ceiling Kit provides a
sturdy support for LCD/DLP hanging brackets (and certain
other products weighing less than 50 pounds) when installing
these products in a suspended ceiling.
The Kit includes a 8 x 24 in. (203 x 610 mm) reinforcing plate
that will be suspended by four tie wires from the true ceiling
above the suspended ceiling tiles. Turnbuckles allow the instal-
lation to be fine-tuned.
The reinforcing plate can be installed anywhere above a
2’ x 2’ (600 X 600mm) or 2’ x 4’ (600 X 1200mm) ceiling tile.
Knockouts for
electrical outlet boxes and
antenna leads
Attachment point for safety
cable and clamp
Turnbuckles for
support wires
BEFORE YOU BEGIN
•CAUTION: To prevent damage to the Kit, which could affect or void the Factory warranty, and to the equipment that
will be attached to it, thoroughly study all instructions and illustrations before you begin the installation. Pay particu-
lar attention to the “Important Precautions” on Page 1.
• The maximum weight to be installed on the CMA-440 mount is 50 pounds (22.68 Kg).
• The ceiling tray is designed to fit above a conventional suspended ceiling system.
• If you have any questions about this installation, contact Chief Manufacturing at 1-800-582-6480.
• In certain installations, it may be easier to install the ceiling anchors (page 3) before you attach the hanger brackets to the ceil-
ing tray.
I N S T A L L A T I O N I N S T R U C T I O N S
CHIEF MANUFACTURING INC.
1-800-582-6480 952-894-6280 FAX 952-894-6918
8401 EAGLE CREEK PARKWAY, STE. 700
SAVAGE, MINNESOTA 55378 USA
8810-000006 Rev. E
2006 Chief Manufacturing
www.chiefmfg.com
06/06
Installation Instructions CMA-440 Light Weight Suspended Ceiling Kit
2
IMPORTANT WARNINGS AND PRECAUTIONS!
WARNING: A WARNING alerts you to the possibility of serious injury or death if you do not follow the instructions.
CAUTION: A CAUTION alerts you to the possibility of damage or destruction of equipment if you do not follow the corre-
sponding instructions.
•WARNING:Improper installation can result in serious personal injury! Make sure that the ceiling structural mem-
bers can support a redundant weight factor five times the total weight of the equipment: if not, reinforce
the ceiling before installing the suspended ceiling kit.
•WARNING:Be aware also of the potential for personal injury or damage to the unit if it is not adequately mounted.
•WARNING:The installer is responsible for verifying that the ceiling to which the CMA-440’s reinforcing plate is
anchored will safely support the combined load of all attached components or other equipment.
•WARNING:The weight of the LCD/DLP projector must not exceed 50 lbs (22.68 kg), the maximum load capacity of
the reinforcing plate.
•CAUTION: To avoid personal injury or damage to the suspended ceiling kit, be sure that it is installed square and parallel in
all dimensions.
•CAUTION: Check the unit for shipping damage before you begin the installation.
CONTENTS
TOOLS REQUIRED FOR INSTALLATION..................... 1
DIMENSIONAL DRAWING.............................................. 2
ASSEMBLY PROCEDURES.............................................. 3
HANG CEILING TRAY ..................................................... 3
ANCHOR THE TRAY TO THE CEILING ........................ 4
SECURE THE SAFETY CABLE........................................ 5
PARTS ................................................................................. 6
TOOLS REQUIRED FOR INSTALLATION
• Phillips screwdrivers, No. 1 and No. 2 tip
• Drill and bit set
• Pliers (heavy-duty)
• Wire cutter
• Hammer (claw type), if suspending from a solid concrete ceiling.
• Other tools may be required depending on the method of installing the unit in the ceiling.

Specyfikacje produktu

Marka: Chief
Kategoria: Niesklasyfikowane
Model: CMA-440

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Chief CMA-440, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Niesklasyfikowane Chief

Chief

Chief PACPC1 Instrukcja

3 Stycznia 2025
Chief

Chief CSA100 Instrukcja

3 Stycznia 2025
Chief

Chief CMA480W Instrukcja

1 Stycznia 2025
Chief

Chief DVM27U3 Instrukcja

31 Grudnia 2025
Chief

Chief PAC527FW-KIT Instrukcja

31 Grudnia 2025
Chief

Chief DVM27U4E Instrukcja

31 Grudnia 2025
Chief

Chief DVM27U4 Instrukcja

31 Grudnia 2025
Chief

Chief DVM27U2 Instrukcja

31 Grudnia 2025
Chief

Chief DVM27U3E Instrukcja

31 Grudnia 2025
Chief

Chief DVM27U2E Instrukcja

31 Grudnia 2025

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

GBC

GBC ThermaBind T500Pro Instrukcja

15 Stycznia 2025
Da-Lite

Da-Lite Parallax 29850 Instrukcja

15 Stycznia 2025
Crivit

Crivit IAN 290909 Instrukcja

15 Stycznia 2025
Tripp Lite

Tripp Lite SmartRack SRW12US Instrukcja

15 Stycznia 2025
Powerfix

Powerfix IAN 280221 Instrukcja

15 Stycznia 2025
AGM

AGM Rattler TC35-640 Instrukcja

15 Stycznia 2025
AGM

AGM Wolf-7 Pro Instrukcja

15 Stycznia 2025
AGM

AGM Anaconda TC50-640 Instrukcja

15 Stycznia 2025
AGM

AGM Secutor Pro TS50-640 Instrukcja

15 Stycznia 2025
Microchip

Microchip AT91SAM9M11 Instrukcja

15 Stycznia 2025