Instrukcja obsługi Chef's Choice SteelPro 470

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Chef's Choice SteelPro 470 (8 stron) w kategorii ostrzałka do noży. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/8
SteelPro®
Model 470 Series
SteelPro®
Congratulations!
As an owner of the Chef’sChoice
® SteelPro® Model 470, you will be able to
experience for the rst time the pleasure of cutting and slicing with perfectly
steeled edges. The SteelPro® creates a unique cutting edge much superior to
that obtainable with conventional steels. The SteelPro
® edge will consistently
have a good “bite and will, uniquely, stay very sharp as you continue to use the
SteelPro®. No skill is required and even a first time user will find it easy to use.
The SteelPro® eliminates the uncertainty, inconsistency and intimidation of the
age-old method of unguided manual steeling. With the SteelPro
® you will in just
seconds be able to consistently obtain superior edges with that extra “bite” and
sharpness unmatched by even the most experienced professionals.
You will quickly realize how much less intimidating it is to use the SteelPro
®
compared to conventional uncontrolled manual steeling.
2
Description of SteelPro
®
The SteelPro® is designed to be used either right or left handed (Figure 1 and 2).
The soft-touch handle is shaped and sized for a comfortable hold. The SteelPro
®
can be hung by the metal ring attached to the handle or stored flat in a drawer
or on a shelf.
The SteelPro® contains two unique rods made of a special high carbon steel
hardened to about Rockwell C-65, which is much harder than any commercially
available cutlery. Consequently these special rods will show very little wear from
the repeated contact with the edge of your finest and hardest knives.
Two precision knife guides, with planes set at about 23 degrees to the vertical
center line of the hardened rods, control and precisely align the face of the knife
as the balde is inserted into the slot between the guide and the blade retention
spring. In use, the blade is inserted alternately into the left and then the right
slots and pulled forward so that the knife edge slides along the surface of the
hardened steel rod.
The steel rods are supported by elastomeric materials that allow the rods to
deect when excessive force is applied to the blade. This feature and the ultra-
precise and consistent angular contact maintained stroke after stroke between
the knife edge and the hardened steel rods are key to optimizing the edge
structure. Viewed under a microscope, the SteelPro
® edge presents a uniform
formation of exceedingly fine and super-sharp micro-serrations. Furthermore,
even after many uses of the SteelPro® on a knife, the original edge geometry is
maintained and the edge does not round-off like it would using a conventional
steel with no angle control.
3
Figure 1. Right-handed use. FIgure 2. Left-handed use.

Specyfikacje produktu

Marka: Chef's Choice
Kategoria: ostrzałka do noży
Model: SteelPro 470

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Chef's Choice SteelPro 470, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje ostrzałka do noży Chef's Choice

Instrukcje ostrzałka do noży

Najnowsze instrukcje dla ostrzałka do noży

Orava

Orava BN-30 Instrukcja

8 Października 2024
Orava

Orava BN-40A Instrukcja

8 Października 2024
Orava

Orava BN-10 Instrukcja

8 Października 2024
Sharpal

Sharpal 191H Instrukcja

7 Października 2024
Presto

Presto EverSharp 08800 Instrukcja

6 Października 2024
Ikea

Ikea FLAKSA 301.670.03 Instrukcja

5 Października 2024
Brentwood

Brentwood TS-1002 Instrukcja

4 Października 2024