Instrukcja obsługi Chef's Choice eXact-V 415


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Chef's Choice eXact-V 415 (8 stron) w kategorii ostrzałka do noży. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/8
eXact-V® 415
Diamond Hone® Sharpener
GB
2
Chef’sChoice®
eXact-V
®
415
Diamond Hone® Sharpener
As an owner of the ChefsChoice® eXact-V® Diamond Hone®
Sharpener you have the world’s most advanced V-type knife
sharpener.
You will find that the accurate dual angle control technology and
precision diamond plating of ultrafine diamonds incorporated
in the eXact-V® creates sharper and more durable edges than
conventional V-sharpeners. The novel use of two sharpening
angles the rst with coarse grit followed by a slightly larger
angle with ultrafine diamonds can quickly create double-bevel
facets along the edge for unmatched sharpness of your favorite
sporting, camping or home knives.
Figure 1.
2
34
4
5
5
6
7
8
9
10 10
11
11
Description of the eXact-V
®
The eXact-V Diamond Hone Sharpener shown fully assembled (page 2)
consists of a support base (2) which doubles as a storage case for the knife
guiding assembly (3) and the two sharpening rods (4). Raised hand-guards (5)
are provided in order to protect the hand that steadies an end of the base while
the other hand is sharpening the knife. For your safety the use of these guards
is highly recommended and they can be conveniently folded down at against
the base when not in use.
The knife guiding frame (3) mounted slidingly on its support post (6) can be
readily deflected sideways to the left or right by the sharpening action of the
knife blade, but normally it is restrained by a leaf spring mechanism (7) in a
center position. A red spring tensioner (8) mounted on the support post (6)
can be raised up to increase the spring tension which in turn increases the
sharpening force and the force needed to slide the guiding frame from its
center rest position.
In order to sharpen the knife edge the face of the knife blade is alternately
placed in intimate contact with the left or the right vertical frame guiding
surfaces (9) and moved down that surface while the knife edge contacts and
slides down the inclined abrasive surface (10).
Each of the two abrasive rods (4) has a coarser grit diamond abrasive coated
pad (Coarse) on one side and an ultra fine diamond abrasive (Fine) coated pad
on the other. These rods can be readily pulled out of the supporting base and
reversed which exchanges the diamond grit size from Coarse to Fine and
simultaneously changes the sharpening angle on each rod by 4 degrees. The
change in angle allows you to create a strong double bevel facet (resembling a
Gothic Arch design) on each side of the edge and hence a more durable edge.
The knife is sharpened by first making a number of alternating guided pulls
across and down the two Coarse diamond pads. The blade face must be aligned
with the vertical guide surface (9) on the right side as shown and then on the
left side. The abrasive rods are then rotated in order to sharpen the edge further
on the Fine abrasives to develop a razor sharp edge.
See following section “How to Sharpen for detailed instructions.
3


Specyfikacje produktu

Marka: Chef's Choice
Kategoria: ostrzałka do noży
Model: eXact-V 415

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Chef's Choice eXact-V 415, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje ostrzałka do noży Chef's Choice

Instrukcje ostrzałka do noży

Najnowsze instrukcje dla ostrzałka do noży

Orava

Orava BN-30 Instrukcja

8 Października 2024
Orava

Orava BN-40A Instrukcja

8 Października 2024
Orava

Orava BN-10 Instrukcja

8 Października 2024
Sharpal

Sharpal 191H Instrukcja

7 Października 2024
Presto

Presto EverSharp 08800 Instrukcja

6 Października 2024
Ikea

Ikea FLAKSA 301.670.03 Instrukcja

5 Października 2024
Brentwood

Brentwood TS-1002 Instrukcja

4 Października 2024