Instrukcja obsługi Chef's Choice Diamond Hone AngleSelect 1520

Chef's Choice ostrzałka do noży Diamond Hone AngleSelect 1520

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Chef's Choice Diamond Hone AngleSelect 1520 (64 stron) w kategorii ostrzałka do noży. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/64
MODEL 1520 InstructIOns
Angle Select® Knife Sharpener
Read these instructions before use.
It is essential that you follow these
instructions to achieve optimum results.
© 2014 EdgeCraft Corp.
DNLFGB
2
Important SafeguardS
When using electrical appliances, basic safety precautions should always be
followed including the following:
1. Read all instructions. Every user should read this manual.
2. To protect against electrical hazards, do not immerse the AngleSelect
® Model 1520 in
water or other liquid.
3. Make sure that only clean knife blades are inserted in Model 1520.
4. Disconnect the appliance from its power source when not in use, before cleaning, during
service and when replacing parts.
5. Avoid contacting moving parts.
6. Do not operate any appliance with a damaged cord or plug or after the appliance
malfunctions, or is dropped or damaged in any manner.
U.S. customers: You can return your sharpener to EdgeCraft’s factory for service where the
cost of repair or electrical or mechanical adjustment can be estimated. When the electrical
cord on this appliance is damaged, it must be replaced by the Chef’sChoice® distributor or
other qualified service to avoid the danger of electrical shock.
Outside U.S.: Please return your sharpener to your local distributor where the cost of repair
or electrical or mechanical adjustment can be estimated. If the supply cord of this appliance
is damaged, it must be replaced by a repair facility appointed by the manufacturer
because special tools are required. Please consult your Chef’sChoice® distributor.
7. CAUTION! This appliance may be fitted with a polarized power plug (one blade is wider than
the other). To reduce the risk of electric shock, this plug will fit in a polarized outlet only one
way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact
a qualified electrician. Do not modify the plug in anyway.
8. The use of attachments not recommended or sold by EdgeCraft Corporation may cause fire,
electric shock or injury.
9. The ChefsChoice® AngleSelect® Model 1520 is designed to sharpen American,
European, and Asian style knives. Do not attempt to sharpen scissors, ax blades or any
blade that does not fit freely in the slots.
10. Do not let the cord hang over edge of table or counter or touch hot surfaces.
11. When in the “ON” position (Red flash on switch is exposed when “ON”), the Chef’sChoice
®
sharpener should always be on a stable countertop or table.
12. WARNING: KNIVES PROPERLY SHARPENED ON YOUR AngleSelect ® Model 1520 WILL BE
SHARPER THAN YOU EXPECT. TO AVOID INJURY, USE AND HANDLE THEM WITH
EXTREME CARE. DO NOT CUT TOWARD ANY PART OF YOUR FINGERS, HAND OR BODY. DO
NOT RUN FINGER ALONG EDGE. STORE IN A SAFE MANNER.
13. Do not use outdoors.
14. Appliance is not intended to be used or cleaned by children or persons with reduced physi-
cal, sensory or mental capabilities or lack of experience and knowledge of the hazards
involved.
15. Do not use honing oils, water or any other lubricant with the AngleSelect
® Model 1520.
16. For household use only.
17.
SAVE THESE INSTRUCTIONS.
3
You made
a good
CHoICe
Congratulations! As an owner of the highly versatile Chef’sChoice
®
AngleSelect® Sharpener Model 1520 you will appreciate how easy it
is to maintain all of your American, European and Asian style knives
in factory sharp condition. A highly precise guide system is provided
to position each style of knife automatically at the optimum sharpen-
ing angle as customized diamond abrasive disks quickly restore and
hone a fresh edge. The edge is then stropped with the Chef’sChoice
®
patented stropping disk to astonishingly sharpness. You will appreciate
the joy of effortless cutting and the unmatched presentation of each
flawless slice.
The Model 1520 is designed to sharpen your Asian style knives with
primary edge facets of 15 degrees (30 degrees total) matching the
sharpness and edge shape of the highest quality Asian knives. Your
American or European knives on the other hand will be sharpened with
primary edge facets of 20 degrees (40 degrees total), the conventional
angle of the Western countries.
Because the typical Asian edge is formed with its primary edge facet
at an angle of 15º (30º total) it is inherently a “sharper” edge than
the conventional Western edge formed at the larger 20º (40º total).
Because the Asian edge is thinner it is usually considered to be a
weaker edge because of that lower angle. Uniquely the Model 1520 is
designed to create a precise 15º primary angle on the Asian blade but
you can at your choice create a second small microbevel along that
edge facet that adds significant strength and durability to that already
very sharp edge.
Thus you will realize the extra advantages in sharpness and durability
that has made the ChefsChoice
® Trizor® multibevel edge the edge of
choice for the professional chef.
We strongly encourage you to read the following sections that detail
optimum sharpening procedures for each style blade. Enjoy!


Specyfikacje produktu

Marka: Chef's Choice
Kategoria: ostrzałka do noży
Model: Diamond Hone AngleSelect 1520

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Chef's Choice Diamond Hone AngleSelect 1520, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje ostrzałka do noży Chef's Choice

Instrukcje ostrzałka do noży

Najnowsze instrukcje dla ostrzałka do noży

Orava

Orava BN-30 Instrukcja

8 Października 2024
Orava

Orava BN-40A Instrukcja

8 Października 2024
Orava

Orava BN-10 Instrukcja

8 Października 2024
Sharpal

Sharpal 191H Instrukcja

7 Października 2024
Presto

Presto EverSharp 08800 Instrukcja

6 Października 2024
Ikea

Ikea FLAKSA 301.670.03 Instrukcja

5 Października 2024
Brentwood

Brentwood TS-1002 Instrukcja

4 Października 2024