Instrukcja obsługi Celestron NexImage 93709

Celestron Niesklasyfikowane NexImage 93709

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Celestron NexImage 93709 (71 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 15 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/71
USERS MANUAL
Model #93709
2 I ENGLISH
Congratulations on your purchase of the Celestron NexImage Solar System Imager. Please read
the instructions carefully and be sure to setup your camera and computer indoors first before
taking it outside and trying it at night.
Your NexImage camera comes with:
• NexImage Camera
NexImage iCap and RegiStax processing
software CD-ROM
Recommended Minimum System
requirements:
+ Pentium IV, 2.0 GHz, 1GB RAM
+ Graphics card with 24 or 32 bit
+ Windows XP, Windows Vista, Windows 7
(32 & 64 bit)
+ DirectX 9.0c or higher
Setting up the Camera
1. Place the CD into your computer’s CD-
ROM drive.
2. Install both the NexImage iCap and
RegiStax software onto your computer.
3. Plug the USB 2.0 connector into a port on
your computer. Once connected, the Found
New Hardware message will appear. Follow
the installation Wizard until the device has
been successfully installed.
4. Double click the NexImage
iCap icon on your desktop to
start the program.
5. If the NexImage is not already detected,
select the camera from the list and press OK.
6. You should be able to see light displayed in
the Preview window of the iCap software
You are now ready to use the camera outside
and image the planets!


Specyfikacje produktu

Marka: Celestron
Kategoria: Niesklasyfikowane
Model: NexImage 93709

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Celestron NexImage 93709, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Niesklasyfikowane Celestron

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane