Instrukcja obsługi Casio XJ-A257
Casio
Projektor Beamer
XJ-A257
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Casio XJ-A257 (103 stron) w kategorii Projektor Beamer. Ta instrukcja była pomocna dla 13 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/103
1
DATA PROJECTOR
XJ-A Series
XJ-A142/XJ-A147*
XJ-A242/XJ-A247*
XJ-A252/XJ-A257*
XJ-M Series
XJ-M141/XJ-M146*
XJ-M151/XJ-M156*
XJ-M241/XJ-M246*
XJ-M251/XJ-M256*
User’s Guide
zIn this manual, “XJ-A Series” and “XJ-M Series” refer only to the specific models listed above.
zBe sure to read the “Safety Precautions” and “Operating Precautions” in the “Setup Guide”
document that comes with the Data Projector, and make sure you use this product correctly.
zKeep this manual in a safe place for future reference.
zVisit the site below for the latest version of this manual.
http://world.casio.com/manual/projector/
*USB Models
EN
2
zDLP is a registered trademark of Texas Instruments of the United States.
zMicrosoft, Windows, and Windows Vista are registered trademarks or trademarks of Microsoft
Corporation in the United States and other countries.
zHDMI, the HDMI Logo and High-Definition Multimedia Interface are trademarks or registered
trademarks of HDMI Licensing, LLC.
zMac OS is a trademark or registered trademark of Apple, Inc. in the United States and other
countries.
zPJLink is a pending trademark or a registered trademark in Japan, the United States, and other
countries and areas.
zCrestron is a registered trademark of Crestron Electronics, Inc. of the United States.
zAMX is a registered trademark of AMX LLC of the United States.
zXGA is a registered trademark of IBM Corporation of the United States.
zOther company and product names may be registered product names or trademarks of their
respective owners.
zPortions of this product are based in part on the work of the Independent JPEG Group.
zThe contents of this User’s Guide are subject to change without notice.
zCopying of this manual, either in part or its entirety is forbidden. You are allowed to use this
manual for your own person is forbidden without thal use. Any other use e permission of CASIO
COMPUTER CO., LTD.
zCASIO COMPUTER CO., LTD. shall not be held liable for any lost profits or claims from third
parties arising out of the use of this product or this manual.
zCASIO COMPUTER CO., LTD. shall not be held liable for any loss or lost profits due to loss of
data due to malfunction or maintenance of this product, or any other reason.
zThe sample screens shown in this manual are for illustrative purposes only, and may not be
exactly the same as the screens actually produced by the product.
3
Contents
Projector Features and Main Functions ....................... 7
Features Common to All Models .................................................................................7
USB Model Features.................................................................................................... 7
Other Model-specific Features .................................................................................... 8
Getting Ready.................................................................. 9
Setting Up the Projector.........................................................................9
Setup Precautions ..................................................................................................... 10
Connecting Projector Cables ...............................................................11
Remote Controller ................................................................................12
To load remote controller batteries ........................................................................ 13
To replace remote controller batteries ................................................................... 13
Projecting an Image...................................................... 14
Selecting the Input Source...................................................................14
To select the input source ...................................................................................... 15
Resolution..................................................................................................................15
3D Input Mode (XJ-M Series Only).......................................................16
Entering the 3D Input Mode ................................................................................... 16
Returning to the Normal Input Mode from the 3D Input Mode .............................. 17
Horizontal Flipping in the 3D Input Mode.................................................................. 17
To swap the left and right images .......................................................................... 17
Projecting with File Viewer (USB Model Only)......................................18
File Viewer Overview..................................................................................................18
Projecting Files Located in Projector Internal Memory..............................................18
To copy files from a computer to projector internal memory ................................. 19
Starting Projection of Files Located in Projector Internal Memory ......................... 21
To format projector internal memory ...................................................................... 22
Projecting Files from a Memory Device Connected by USB.....................................23
To connect a USB flash drive to the projector ....................................................... 23
To connect a memory card to the projector........................................................... 24
To connect a digital camera to the projector.......................................................... 24
To start projection of files that are on a memory device connected via USB......... 25
Projecting Files .......................................................................................................... 27
To project a presentation file .................................................................................. 27
To project a PDF file............................................................................................... 28
To project an image file .......................................................................................... 29
4
To project a movie file ............................................................................................ 29
File Menu Operations................................................................................................. 31
To toggle the file menu between the list view and icon view ................................. 31
To scroll the file menu ............................................................................................ 31
To open a folder ..................................................................................................... 31
To exit the current folder and move up to the next level ........................................ 31
To return to the main screen from the file menu .................................................... 31
Configuring File Viewer Settings................................................................................ 32
To configure File Viewer settings............................................................................ 32
Autorun ...................................................................................................................... 34
To auto project images files or a movie file from a USB flash drive ....................... 34
To auto project images files or a movie file from projector internal memory.......... 35
File Viewer Troubleshooting....................................................................................... 36
File Viewer Error Messages ....................................................................................... 37
Using EZ-Converter FA to Convert PowerPoint Files to ECA or PtG Files................ 38
To convert a PowerPoint file to an ECA file or PtG file........................................... 39
To specify the screen resolution of the ECA file or PtG file.................................... 41
To specify the maximum animation display time.................................................... 41
To play back an ECA file or PtG file on your computer .......................................... 41
Projecting with the USB Display Function (USB Model Only)..............43
USB Display Function Overview ................................................................................43
Projecting Computer Screen Contents Over a USB Connection .............................. 43
To project Windows computer screen contents over a USB connection
for the first time ...................................................................................................... 44
To project Mac OS computer screen contents over a USB connection
for the first time ...................................................................................................... 45
To project computer screen contents over a USB connection
after the first time.................................................................................................... 47
Projecting the Screen Image of a Graphing Calculator
(USB Model Only).................................................................................48
To project the screen image of a graphing calculator ............................................ 48
Operating the Projector................................................ 49
Output Image and Audio Operations ...................................................49
To use manual keystone correction (KEYSTONE) .................................................. 49
To zoom an image (D-ZOOM)................................................................................. 49
To adjust the volume level (VOLUME) .................................................................... 49
To mute the audio (VOLUME)................................................................................. 50
To momentarily blank the image and mute the audio (BLANK).............................. 50
To freeze an image (FREEZE) ................................................................................. 50
To auto adjust an image (AUTO)............................................................................. 50
5
To change the aspect ratio of the projected image (ASPECT)............................... 51
To adjust image brightness (FUNC)........................................................................ 52
To change the color mode (FUNC)......................................................................... 52
Eco Mode (ECO)...................................................................................53
To select the Eco Mode.......................................................................................... 53
Using the Presentation Timer (TIMER) .................................................54
To display the timer ................................................................................................ 54
To display the timer function menu ........................................................................ 54
To configure timer settings..................................................................................... 55
To start a countdown timer operation .................................................................... 55
To pause the timer countdown............................................................................... 56
To resume a paused timer countdown...................................................................56
To reset the timer to its start time...........................................................................56
Using the Setup Menu (MENU) ............................................................57
Basic Setup Menu Operations ................................................................................... 57
Setup Menu Settings .................................................................................................57
Password Protection ............................................................................62
Using the Password Feature...................................................................................... 62
To change the password ........................................................................................ 63
To change the power on password setting ............................................................ 64
To change the projector internal storage function password ................................. 64
Control Panel Lock...............................................................................65
To lock the control panel........................................................................................ 65
To unlock the control panel .................................................................................... 65
Cleaning the Projector.................................................. 66
Cleaning the Projector Exterior ............................................................66
Cleaning the Lens.................................................................................66
Cleaning Vents .....................................................................................66
Troubleshooting ........ ...................... 67..............................
Indicators..............................................................................................67
Error Indicators and Warning Messages ..............................................68
Projector Troubleshooting....................................................................70
6
Appendix ........................................................................ 72
Connecting to a Component Video Output..........................................72
Connecting to a Composite Video Output or S-Video Output
(XJ-M Series Only)................................................................................73
Updating Firmware and Transferring a User Logo...............................74
To connect the projector’s LOGO port with a computer’s USB port..................... 74
Hanging the Projector from a Ceiling ...................................................75
Projection Distance and Screen Size ...................................................76
Aspect Ratio Setting and Projection Image .........................................78
Supported Signals................................................................................80
Projector RS-232C Control ..................................................................83
To establish a serial connection between the projector and a computer............... 83
7
Projector Features and Main Functions
Features Common to All Models
zMercury-free Hybrid Light Source
A CASIO-original laser and LED hybrid light source delivers high luminance from 2,500 to 3,000
lumens. This projector does not use a mercury lamp, making it environmentally friendly.
zA wide selection of input sources
Analog RGB, composite video, S-video (XJ-M Series only), component video (Y·Cb·Cr, Y·Pb·Pr),
and HDMI input sources are supported.
zIntelligent Brightness Control function (Eco Mode)
The projector senses surrounding light levels and adjusts projection brightness automatically as
required for efficient low-power operation. (Requires “Eco Mode” setting to be set to “On (Auto)”.)
zDirect Power On
The projector can be configured to turn on automatically and start projecting as soon as it is
plugged into a power outlet.
zPresentation Timer
The presentation timer is a countdown timer that shows the amount of presentation timing
remaining on the projection screen.
zFirmware update and user logo image data transfer
Firmware (software in the projector flash ROM) updates and user logo images can be transferred to
the projector from a computer as required.
USB Model Features
USB Models: XJ-A147, XJ-A247, XJ-A257, XJ-M146, XJ-M156, XJ-M246, XJ-M256
zProjection of image, movie, and other types of files (File Viewer)
The projector’s File Viewer can be used to open and project the following types of files located in
projector internal memory or on a USB flash drive connected to the projector: image files (JPG,
PNG, GIF, BMP), movie files (AVI, MOV, MP4), presentation files (ECA, PtG), PDF files.
zProjection of computer screen contents over a USB connection (USB Display)
Connecting the projector to a computer with a USB cable enables projection of the computer’s
screen contents. This supports projection of screen contents of even small computers that have
only a USB port, but no RGB, HDMI, or other type of video output terminal.
zGraphic Scientific Function Calculator Connection
Certain CASIO graphic scientific calculator models can be connected directly to the projector’s
USB-A port for projection of the calculator screen contents.
zProjection of images from a computer or smart device over a wireless LAN connection*
The projector is configured as an access point, a computer or smart device can connect directly to
it over a wireless LAN connection. Or a computer or smart device can connect over a wireless LAN
connection via an existing wireless LAN access point. Both screen output and audio output are
supported while a computer is connected.
zProjector control using a computer or smart device over a wireless LAN connection*
The projector can be controlled from a computer or smart device connected to it over a wireless
LAN connection.
*For details about wireless LAN connection, see the separate “Network Function Guide”.
8
Other Model-specific Features
XJ-A Series
zSlim and compact
A4 file size and approximately 43 mm slim. Compact enough to install or use just about anywhere.
XJ-M Series
z3D image projection support
Projection of a 3D image signal (60Hz/120Hz field sequential protocol) via one of three input
sources (analog RGB, composite video, S-video) is supported.
WXGA models (XJ-A242, XJ-A247, XJ-A252, XJ-A257, XJ-M241, XJ-M246, XJ-M251, XJ-M256)
zWXGA Resolution
Supports WXGA (1280 × 800) wide-screen projection resolution. This resolution is ideal for
projecting wide-screen notebook computer and HD TV images.
XJ-M Series USB Models (XJ-M146, XJ-M156, XJ-M246, XJ-M256)
zProjection of screen contents of a computer connected via wired LAN*
A LAN cable can be used for a direct connection between the projector and a computer, or a LAN
connection can be established via an existing network router. Once a connection is established,
both screen output and audio output are supported.
zRemote control of the projector from a computer connected via wired LAN*
Projector control operations can be performed remotely using the web browser of a computer
connected via a wired LAN connection.
*For details about LAN connection, see the separate “Network Function Guide”.
• Separately available 3D glasses (YA-G30) are required in order to view a projected 3D image in
3D. Also, separately available special software (CASIO 3D Converter) is required to project a 3D
image with the projector when a computer (analog RGB) is the input source.
• 3D image projection is not supported via an HDMI connection or component video connection.
9
Getting Ready
This section explains how to select a location for the projector, how to connect its cables, and how to
perform other operations required before using it.
Locate the projector on a desk, table, or stand that is firm and level. Make sure that you allow
sufficient space around the sides and back of the projector for proper ventilation. The illustrations
below show how the projector should be oriented relative to the screen for optimum projection.
Important!
zWith an XJ-A Series Projector, the allowable vertical angle range when setting up is ±30
degrees (Figure 1). Make sure the projector is within this range. Setting up the projector
outside this vertical angle range can shorten lamp life. There is no limit on the horizontal angle
of the projector (Figure 2).
zWith an XJ-M Series Projector, there is no limit on the vertical and horizontal setup angle.
Setting Up the Projector
XJ-A242/XJ-A247/XJ-A252/XJ-A257/
XJ-M241/XJ-M246/XJ-M251/XJ-M256 Other models
Position the projector so the lens side is at the edge of the table,
etc.
Make sure the projector is at a right angle to the screen.
Figure 1 Figure 2
Screen Screen
10
Setup Precautions
zUse a conveniently located power outlet that you can reach easily when you need to unplug the
projector.
zDo not located any objected within 30 cm (11.8 inches) around the projector. Particular care is
required to keep objects away from projector air intake and exhaust openings.
zAirflow from air conditioning equipment can blow the heat being exhausted from the area around
the projector’s lens in a way that causes heat ripples to appear in the projected image. If this
happens, adjust the airflow of the air conditioning equipment or move the projector.
11
Connect the projector to a power outlet and to an input source device.
XJ-A Series
XJ-M Series
Note
zFor more information about component video connection, see “Connecting to a Component
Video Output” on page 72.
zFor information about how to connect for RS-232C control of the projector, see “Projector
RS-232C Control” (page 83).
zFor information about how to connect in order to update the projector firmware or to transfer
user logo data, see “Updating Firmware and Transferring a User Logo” (page 74).
Connecting Projector Cables
*1 Use this port to connect a USB flash drive (page 23), a CASIO graphic scientific calculator (page
48), or the wireless adapter that comes with the projector (see the separate “Network Function
Guide”).
*2 Terminal used when accessing projector internal memory from a computer and when projecting
computer screen contents from the projector over a USB connection. For more information, see
“To copy files from a computer to projector internal memory” (page 19) and “Projecting with the
USB Display Function (USB Model Only)” (page 43).
Use the RGB cable that comes with the projector to connect to the RGB output terminal of a
computer or other input source.
Use a commercially available HDMI cable to connect to the HDMI output terminal of a computer,
video equipment, or other input source.
Connect to the composite output terminal (pin jack type) of the video device.
Plug the mini plug end of the special AV cable that comes with the projector into this terminal. Plug the pin
plugs (yellow, red, and white) into each of the applicable video (yellow) and audio (red and white) terminals of
the video device.
Use the supplied power cord to plug
the projector into a power outlet.
*2
*1
Use the RGB cable that comes with the projector to connect to the RGB output terminal of a
computer or other input source.
Use a commercially available HDMI cable to connect to the HDMI output terminal of a
computer, video equipment, or other input source.
Connect to the composite output or S-video output of the video device.
For details, see “Connecting to a Composite Video Output or S-Video
Output (XJ-M Series Only)” (page 73).
Use the supplied power cord to plug
the projector into a power outlet.
*2*1
12
Projector operations are performed using the remote controller that comes with it. Point the remote
controller signal emitter at one of the signal receivers on the projector as you perform remote
controller key operations. The maximum range of the remote controller signal is approximately
5 meters (16.4 feet) (between signal emitter and receiver).
Important!
zTo avoid running down the battery, store the remote control unit so its keys are not pressed
inadvertently.
Remote Controller
1Remote control signal emitter
2[P] (Power) key
Turns power on or off.
3[INPUT] key
For changing the input source.
4Keys for performing projection operations and for configuring
projector settings.
(Only XJ-A Series projectors have [ZOOM –], [ZOOM +],
[FOCUST], [FOCUSS] keys.)
5These keys are used with USB models only. They are mainly
used for File Viewer (page 27) projection operations.
1
2
3
4
5
13
To load remote controller batteries
Important!
zBe sure to use alkaline batteries only.
To replace remote controller batteries
Open the battery cover on the back of the remote controller, replace the old batteries with new ones,
and then close the battery cover.
*Caution RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
1.
Open the battery cover on the back
of the remote controller.
2.
Load two new batteries into the
case, making sure that their positive
(+) and negative (–) ends are facing
correctly.
3.
Close the battery cover on the back of the remote controller.
14
Projecting an Image
This section provides information about how to project images from various different input sources.
Input source selection provides the options described in the table below.
Selecting the Input Source
Input Source Name Output Projection Image (and Audio)
Computer Screen image of a computer connected to the projector’s computer terminal.
Video XJ-A Series: Images and audio from a video device connected to the projector’s AV
terminal.
XJ-M Series: Images and audio from a video device connected to the projector’s
VIDEO terminal and AUDIO IN R/L terminals.
S-Video (XJ-M Series) Images and audio from a video device connected to the projector’s S-VIDEO terminal
and AUDIO IN R/L terminals.
HDMI Images and audio from a computer or video device connected to the projector’s
HDMI terminal.
File Viewer Images (and audio in the case of a movie file) contained in the following types of files
located in projector internal memory or on a memory device connected to the
projector’s USB-A port: image files, movie files, presentation files, PDF files.
CASIO USB Tool Screen contents of a CASIO graphic scientific calculator or electronic dictionary
connected to the projector’s USB-A port.
Wireless (XJ-A Series) Screen contents and audio of a computer connected to the projector via wireless
LAN.
Network (XJ-M Series) Screen contents and audio of a computer connected to the projector via wireless LAN
or wired LAN
USB Display Screen contents and audio of a computer connected to the projector’s USB-B port.
15
To select the input source
1.
Press the [INPUT] key. This will display the “Input” dialog box.
2.
Depending on the input source, perform one of the operations described in the
table below.
zThe name of the input source you selected will appear in the upper right corner of the
projection screen for a few seconds.
zThe message “No signal input” will appear if no input signal can be detected.
Note
zFor more information about the operation required to select Wireless, Network, USB Display,
File Viewer, or CASIO USB Tool as the input source and perform projection, refer to the
following.
Resolution
Depending on the projector model, its video resolution will be fixed at XGA (1024 × 768 pixels) or
WXGA (1280 × 800 pixels). Images may appear coarse, text and othe fficult to read r figures may be di
or a moire pattern may appear when the input signal from a computer does not match the projector’s
video resolution. If this happens, try doing the following.
zChange the computer’s output resolution setting so it matches the projector’s video resolution.
For information about the video resolution of your projector, see “Specifications” in the Setup
Guide. See the user documentation that comes with your computer for details about changing its
settings.
zChange the “Aspect Ratio” setting to “True” (Applies only to models that support WXGA video
resolution). With the “True” setting, the projector projects the input signal at its actual size (1 input
source dot equal to one projector output pixel dot).
For information about configuring the Aspect Ratio setting, see “To change the aspect ratio of the
projected image (ASPECT)” (page 51).
To select this input source: Perform this operation:
Computer, Video,
S-Video (XJ-M Series), HDMI,
Wireless (XJ-A Series),
Network (XJ-M Series), USB Display
Use the [T] and [S] keys to select the name of the input source you
want to select and then press the [ENTER] key.
File Viewer 1. Use the [T] and [S] keys to select “Viewer” and then press the
[ENTER] key.
2. On the dialog box that appears, confirm that “File Viewer” is
selected and then press the [ENTER] key.
CASIO USB Tool 1. Use the [T] and [S] keys to select “Viewer” and then press the
[ENTER] key.
2. Press the [T] key to select “CASIO USB Tool” and then press the
[ENTER] key.
Wireless or Network: Separate Network Function Guide
USB Display: “Projecting with the USB Display Function (USB Model Only)” (page 43)
File Viewer: “Projecting with File Viewer (USB Model Only)” (page 18)
CASIO USB Tool: “Projecting the Screen Image of a Graphing Calculator (USB Model Only)”
(page 48)
16
Your projector supports projection of 3D images. To project a 3D image, first enter the projector’s 3D
input mode, and then select the input source.
Important!
zSeparately available 3D glasses (YA-G30) are required in order to view a projected 3D image in
3D.
zSeparately available special software (CASIO 3D Converter) is required to project a 3D image
with the projector when a computer (analog RGB) is the input source.
z3D image projection is not supported via an HDMI connection or component video
connection.
The input sources described below can be selected for projection in the 3D Input Mode.
Note
See “3D Signals (3D Input Mode)” (page 82) for a list of 3D image signals supported by this
projector.
Entering the 3D Input Mode
1.
Press the [INPUT] key to display the input source selection screen.
2.
Select Computer (RGB), S-video, or Video as the input source.
3.
Use the [T
T
T
TT] and [S
S
S
SS] keys to move the highlighting to “To 3D input mode” and
then press the [ENTER] key.
zThis enters the 3D input mode and closes the input source selection screen.
Important!
zYou cannot select HDMI, File Viewer, CASIO USB Tool, Network, or USB Display as the input
source in the 3D input mode. To use either of these input sources, change the input source
setting back to normal input mode.
zWhen Computer is selected as the input source in the 3D input mode, a component video
signal input through the projector’s COMPUTER IN terminal is treated as an RGB signal
resulting in abnormal image projection.
zExcept when using the projector for 3D image projection, you should normally leave it in the
normal input mode.
3D Input Mode (XJ-M Series Only)
Input Source Projection Conditions
Computer (Analog RGB) zAny of the following types of 3D image data played back using separately available
special software (CASIO 3D Converter).
– 2D image file converted to a 3D image file using CASIO 3D Converter
– Side-by-side 3D format files
zSignal with 60Hz/120Hz vertical scan frequency
Composite Video, S-video zField sequential 3D format files recorded with field sequential DVD software, etc.
zSignal with 60Hz vertical scan frequency
17
Returning to the Normal Input Mode from the 3D Input Mode
1.
Press the [INPUT] key to display the input source selection screen.
2.
Use the [T
T
T
TT] and [S
S
S
SS] keys to move the highlighting to “To normal input mode”
and then press the [ENTER] key.
zThis enters the normal input mode and closes the input source selection screen.
Horizontal Flipping in the 3D Input Mode
In side-by-side 3D, a full frame consists of two halves on the left and right for each eye. In rare cases,
the left and right images may be reversed, which causes a loss of 3D depth. If this happens, try using
the following procedure to swap the left and right images with each other.
To swap the left and right images
In the 3D input mode, press the [ENTER] key.
20
10.
After you copy all of the files you want, perform one of the operations below to
unmount the “InternalMem” drive.
11.
Disconnect the USB cable from the projector and the computer.
12.
Turn the projector back on.
zThis stops internal storage function operation and returns to normal projection.
zFor information about how to project a file copied to projector internal memory, see “Starting
Projection of Files Located in Projector Internal Memory” (page 21).
Note
zThe above is presented only as a typical example of the file copy operation on a computer.
The actual steps you will need to perform may differ slightly in accordance with your
computer’s operating system and setup.
zIf “On” is selected for “Internal Storage Password” on the setting menu, a password input
dialog box will appear when you press the [ENTER] key in step 3 of the procedure above. If
this happens, enter the appropriate password and then press the [ENTER] key to advance to
step 4 of the procedure. For details, see “Password Protection” (page 62).
Windows:
Click the “Safely Remove Hardware” icon in the task tray (in the lower right corner of the screen).
On the menu that appears, select “USB Flash Drive”. Check to make sure that a “Safe To
Remove Hardware” message appears.
Mac OS:
Drag the “InternalMem” drive icon to the trash can icon. Check to make sure that the
“InternalMem” drive icon is no longer on the Mac desktop.
21
Starting Projection of Files Located in Projector Internal
Memory
1.
If a USB flash drive or some other USB device is connected to the projector’s
USB-A port, disconnect it.
2.
Press the [INPUT] key. This will display the “Input” dialog box.
3.
Use the [T] and [S] keys to select “Viewer” and then press the [ENTER] key.
4.
On the dialog box that appears, confirm that “File Viewer” is selected and then
press the [ENTER] key.
zThis will start up File Viewer and display the File Viewer main screen like the one shown below.
5.
Depending on the type of file you want to project, perform one of the operations
below.
To project this type of file: Perform this operation:
Presentation Files “To project a presentation file” (page 27)
PDF Files “To project a PDF file” (page 28)
Image Files “To project an image file” (page 29)
Movie Files “To project a movie file” (page 29)
22
To format projector internal memory
Important!
zPerforming the procedure below will delete all of the folders and files currently in the projector
internal memory.
1.
Perform steps 1 through 7 under “To copy files from a computer to projector
internal memory” (page 19).
2.
Perform one of the procedures below to format the “InternalMem” drive on your
computer.
Windows:
(1) Right click the “InternalMem” drive icon. On the menu that appears, select “Format”.
(2) On the “Format” dialog box that appears, check to make sure that “FAT32 (recommended)” is
selected for “File system” and then click [Start].
(3) On the warning dialog box that appears, click the [OK] button.
(4) When a dialog box telling you that formatting is complete appears, click [OK] to close it.
(5) Click [Close] to close the format dialog box.
Mac OS:
(1) On the Mac desktop menu bar “Go” menu, select “Utilities” to display the “Utilities” folder.
(2) Double-click “Disk Utility” to start it up.
(3) In the left pane of the disk utility window, click the line above “InternalMem” and then click
[Erase] at the top of the right pane.
(4) In the “Format” box, select “MS-DOS (FAT)”.
(5) At the bottom of the right pane, select [Erase].
(6) On the warning dialog box that appears, click the [OK] button.
(7) The screen will return to the disk utility window when formatting is complete. Close the
window.
23
Projecting Files from a Memory Device Connected by USB
Use the procedures in this section when you want to use File Viewer to project image files, movie files,
presentation files, or PDF files from a USB flash drive or other memory device.
Supported Memory Devices
The Data Projector’s USB-A port supports connection of a FAT/FAT32 format memory device
supported by the USB interface. The following are supported memory devices.
zUSB flash drive
zMemory cards
A commercially available USB card reader is required to connect a memory card to the Data
Projector.
zUSB storage class (USB Mass Storage Class) compatible digital cameras
To connect a USB flash drive to the projector
Connect USB flash drive to the Data Projector’s USB-A port as shown below.
XJ-A Series XJ-M Series
24
To connect a memory card to the projector
1.
Load the memory card into a USB card reader’s card slot.
z For details about how to load a memory card into the USB card reader, see the user
documentation that comes with the reader.
2.
Connect the USB card reader to the Data Projector’s USB-A port.
To connect a digital camera to the projector
1.
If necessary, configure the digital camera’s USB mass storage class setting.
2.
Turn off the digital camera and connect a USB cable to it.
3.
Connect the other end of the USB cable (Type A connector) to the Data
Projector’s USB-A port.
4.
Turn on the digital camera.
Note
z For details about steps 1, 2, and 4, see the user documentation that comes with your digital
camera.
XJ-A Series
XJ-M Series
25
To start projection of files that are on a memory device
connected via USB
1.
Connect the memory device where files you want to project are stored to the
projector’s USB-A port.
zIf the File Viewer main screen appears automatically, advance to step 5 of this procedure. If it
doesn’t, go to step 2. Note that the File Viewer main screen will appear automatically if “On” is
selected for the “Plug and Play” setting on the projector’s Setup Menu.
2.
Press the [INPUT] key. This will display the “Input” dialog box.
3.
Use the [T] and [S] keys to select “Viewer” and then press the [ENTER] key.
4.
On the dialog box that appears, confirm that “File Viewer” is selected and then
press the [ENTER] key.
zThis will start up File Viewer and display the File Viewer main screen.
5.
Depending on the type of file you want to project, perform one of the operations
below.
zThe screen that will appear depends on the function you selected.
6.
Use the file list displayed on the screen to check the contents of the USB flash
drive you connected in step 1 of this procedure or the contents of internal
memory.
zIf the file list shows the contents of a USB flash drive, go to step 8 of this procedure. If the file
list shows the contents of internal memory, go to step 7.
7.
Press the [FUNC] key. On the menu that appears, select “Drive Switching” and
then press the [ENTER] key.
To project this type of file: Perform this operation:
Presentation File Use the [T] and [S] keys to select “Presentation” and then press the [ENTER]
key.
PDF File Use the [T] and [S] keys to select “PDF Viewer” and then press the [ENTER]
key.
Image File Use the [T] and [S] keys to select “Slide” and then press the [ENTER] key.
Movie File Use the [T] and [S] keys to select “Movie” and then press the [ENTER] key.
Function name Folder path
26
8.
Depending on the function you selected in step 5 of this procedure, perform one
of the operations below.
Drive Menu
Entering the Presentation Mode, PDF Viewer Mode, Slide Mode, or Movie Mode while there are
multiple memory devices connected to the Data Projector’s USB-A port (multiple USB flash drive
devices connected via a USB hub, multiple memory cards loaded in the memory card reader
connected to the Data Projector, etc.) will cause a menu like the one shown below to appear on the
projection screen.
When this happens, use the cursor keys to move the highlighting to the drive you want to use and then
press the [ENTER] key. This will display a menu of files for the mode you are entering.
Note
zThe Data Projector can recognize up to four drives.
zThe message “NOUSB” will appear in the Drive Menu if there is no memory device connected
to the projector’s USB-A port when you perform Drive Switching ([FUNC] 3 “Drive
Switching” 3 [ENTER]). If this happens, perform Drive Switching again to restore the
previous screen.
If you selected this function: Perform this operation:
Presentation Perform the procedure from step 2 under “To project a presentation file”
(page 27).
PDF Viewer Perform the procedure from step 2 under “To project a PDF file” (page 28).
Slide Perform the procedure from step 2 under “To project an image file” (page
29).
Movie Perform the procedure from step 2 under “To project a movie file” (page 29).
27
Projecting Files
This section explains procedures you can project each type of file using File Viewer.
To project a presentation file
1.
On the File Viewer main screen, select “Presentation” and then press the
[ENTER] key.
z This displays a menu of presentation (ECA or PtG) files.
2.
Use the [T] and [S] keys to select the presentation file you want to play and then
press the [ENTER] key (or [ ] key).
z This will start playback of the currently selected presentation file.
3.
Perform page change and other operations as required.
z You can perform the operations described in the table below while presentation playback is in
progress.
4.
To return to the file menu, press the [ESC] key.
5.
To return to the main screen, press the [FUNC] key and then the [ENTER] key.
To do this: Perform this operation:
Go to the previous page Press the [W] or [ ] key.
Go to the next page Press the [X] or [ ] key.
Pause playback Press the [ ] key.
Resume playback from where it
was paused
Press the [ ] key.
Move back to the position of the
previous animation delimiter
Press the [S] or [ ] key
Move forward to the position of
the next animation delimiter
Press the [T] or [ ] key.
Select a particular page from a
menu of thumbnails and play back
that page
1. Press the [FUNC] key.
2. On the menu that appears, select “Page Selection” and then press
the [ENTER] key.
3. Use the cursor keys to select the thumbnail of the page you want
to play back and then press the [ENTER] key.
28
To project a PDF file
1.
On the File Viewer main screen, select “PDF Viewer” and then press the [ENTER]
key.
zThis displays a list of PDF files.
2.
Use the [T] and [S] keys to select the PDF file you want to open and then press
the [ENTER] key (or [ ] key).
zThis will open the selected PDF file.
3.
Perform page change, zoom, and other operations as required.
zThe following operations are supported during PDF file projection.
4.
To return to the file menu, press the [ESC] key.
5.
To return to the main screen, press the [FUNC] key and then the [ENTER] key.
To do this: Perform this operation:
Go to the previous page Press the [W] or [ ] key.
Go to the next page Press the [X] or [ ] key.
Adjust the image to the
screen width
Press the [FUNC] key. On the menu that appears, select “Adjust to Screen
Width” and then press the [ENTER] key.
Return to a full page view Press the [FUNC] key. On the menu that appears, select “Show Entire
Page” and then press the [ENTER] key.
Select a page from a
thumbnail list and display it
1. Press the [FUNC] key.
2. On the menu that appears, select “Page Selection” and then press the
[ENTER] key.
3. Use the cursor keys to select the thumbnail of the page you want to
display and then press the [ENTER] key.
29
To project an image file
1.
On the File Viewer main screen, select “Slide” and then press the [ENTER] key.
z This displays a list of image files.
2.
Use the [T] and [S] keys to select image file you want to open and then press
the [ENTER] key.
z This will project the selected image file.
z Pressing the [ ] key instead of the [ENTER] key will start an image file slideshow starting
from the currently selected file.
3.
Perform the rotate image and image scrolling operations described below as
required.
z The following operations are supported during image file projection.
* Supported for JPEG files only.
4.
To return to the file menu, press the [ESC] key.
5.
To return to the main screen, press the [FUNC] key and then the [ENTER] key.
To project a movie file
1.
On the File Viewer main screen, select “Movie” and then press the [ENTER] key.
z This displays a list of movie files.
2.
Use the [T] and [S] keys to select the movie file you want to open and then
press the [ENTER] key or [ ] key.
z This will start playback of the selected movie file.
To do this: Perform this operation:
Project the previous image file Press the [W] or [ ] key.
Project the next image Press the [X] or [ ] key.
Rotate the image leftwards 90 degrees* Press the [ ] key.
Rotate the image rightwards 90 degrees* Press the [ ] key.
Start a slideshow Press the [ ] key.
Stop an ongoing slideshow Press the [ ] key.
30
3.
Perform fast forward, fast reverse, pause, and other operations as required.
zThe operations described below are supported during movie file playback.
4.
To return to the file menu, press the [ESC] key.
5.
To return to the main screen, press the [FUNC] key and then the [ENTER] key.
To do this: Perform this operation:
Pause and resume movie playback Press the [ENTER] or [ ] key.
zA pause icon ( ) is displayed in the upper left
corner of the projection screen while movie
projection is paused.
Re-play the file from the beginning 1. Press the [FUNC] key.
2. On the menu that appears, select “Play from
Beginning” and then press the [ENTER] key.
Toggle display of the movie playback time
between show and hide
Press the [FUNC] key. On the menu that appears,
select “Time Indicator On/Off” and then press the
[ENTER] key.
Fast forward at 2X, 8X, or 32X normal speed Press the [X] or [ ] key.
zThe first press starts 2X speed fast forward, the
second press increases to 8X, and the third press
increases to 32X.
zThe indicator appears in the upper left corner
during 2X fast forward, during 8X fast forward,
and during 32X fast forward.
Fast reverse at 2X, 8X, or 32X normal speed Press the [W] or [ ] key.
zThe first press starts 2X speed fast reverse, the
second press increases to 8X, and the third press
increases to 32X.
zThe indicator appears in the upper left corner
during 2X fast reverse, during 8X fast reverse,
and during 32X fast reverse.
Return from fast forward or fast reverse to
normal playback
Press the [ENTER] key or [ ] key twice. Pressing
either of these keys only once will pause playback.
Press once more to start normal playback.
Jump to the final movie frame Press the [FUNC] key. On the menu that appears,
select “Go to End” and then press the [ENTER] key.
Stop movie file playback and return to the file
menu
Press the [ESC] key.
Total movie play time
Elapsed movie play time
32
Configuring File Viewer Settings
This section explains how to configure File Viewer settings, including those that control what appears
on the File Viewer file menu.
To configure File Viewer settings
1.
On the File Viewer main screen, select “Viewer Settings” and then press the
[ENTER] key.
zThis displays the “Viewer Setup” screen.
2.
Use [T] and [S] to select the item whose setting you want to change.
3.
Use [W] and [X] to change the currently selected setting.
zFor information about the settings available for each item, see “File Viewer Setting Items”.
4.
Repeat steps 2 through 3 as many times as necessary to configure all of the
settings you want.
5.
After all the settings are the way you want, press the [ESC] key to return to the
File Viewer main screen.
33
File Viewer Setting Items
The initial default setting for each item is indicated by an asterisk (*).
Setting Name Description
Display Sequence
Setup
Specifies the sequence of images in the file menu.
File Names (Ascending)*:
Displays files in file name ascending order.
File Names (Descending):
Displays files in file name descending order.
File Name Extension (Ascending):
Displays file names in file name extension ascending alphabetical order. If multiple files
have the same file name extension, they are displayed in file name ascending order.
Time (New-to-Old):
Displays files by the time they were last modified, from the newest to the oldest.
Time (Old-to-New):
Displays files by the time they were last modified, from the oldest to the newest.
Startup Mode Specifies whether the default view when a mode is entered from the main File Viewer
main screen is the list view or icon view.
List View*:
Specifies list view as the default view.
Icon View:
Specifies icon view as the default view.
Thumbnail View Show*:
Displays file thumbnails in the file menu.
Hide:
File thumbnails not displayed.
Image Switching Manual*:
Specifies manual image scrolling.
Auto:
Specifies auto image scrolling.
Slideshow Display
Interval
Specifies how long each image will remain displayed during a slideshow.
5 seconds*, 10 seconds, 30 seconds, 1 minute, 5 minutes
Slideshow Repeat Repeat:
Loops playback of a slideshow or movie.
Repeat Off*:
Automatically stops playback when the end of a slideshow or movie is reached.
Movie Audio Output Output*:
Outputs audio when a movie with an audio track is played back.
Do not output:
Audio not output during movie playback.
Initialize Viewer Setup Returns all File Viewer settings to their initial defaults.
34
Autorun
Autorun lets you configure the projector for automatic projection of image files or a movie file located
in a special folder named AUTORUNC. When auto projection is performed depends on where the
AUTORUNC folder is located.
The settings shown below need to be configured before using Autorun.
z“Multimedia Settings 3 Autorun” (page 61): Enabled
z“Option Settings 2 3 Plug and Play” (page 60) ng Autorun from a USB : On (Only when performi
flash drive)
Note
zAutorun projection of the still images or a movie file is in accordance with the current settings
configured on the “Viewer Setup” screen (page 32).
To auto project images files or a movie file from a USB flash
drive
1.
Create a folder named “AUTORUNC” (all single-byte upper-case characters) in
the root directory of the USB flash drive.
2.
Insert all of the image files or movie file you want to auto project into the folder
you created in step 1.
zIf you want to auto project a movie file, place only one movie file into the “AUTORUNC” folder.
Do not place any other files into the folder. If there is both a movie file and image file in the
“AUTORUNC” folder, the image file will be given priority and the movie file will not be played.
zMultiple image files can be placed in the “AUTORUNC” folder without any problem. If there
are, plugging the USB flash drive into the projector in step 3 below will start a slideshow of the
images.
3.
While projector power is turned on, plug the USB flash drive that contains the
“AUTORUNC” folder to which you copied the files in step 2 above into the
projector’s USB-A port.
zThis will automatically start up File Viewer and project the file(s) you put in the “AUTORUNC”
folder in step 2 above.
When AUTORUNC is located here: Autorun is performed at this time:
Internal memory When the projector is turned on.
USB flash drive When the USB flash drive is plugged into the projector’s
USB-A port.
35
To auto project images files or a movie file from projector
internal memory
1.
Perform steps 1 through 8 under “To copy files from a computer to projector
internal memory” (page 19).
2.
Create a folder named “AUTORUNC” (all single-byte upper-case characters) in
the root directory of the “InternalMem” drive (projector internal memory).
3.
Insert all of the image files or movie file you want to project with Autorun into the
folder you created in step 2.
z If you want to auto project a movie file, place only one movie file into the “AUTORUNC” folder.
Do not place any other files into the folder. If there is both a movie file and image file in the
“AUTORUNC” folder, the image file will be given priority and the movie file will not be played.
z Multiple image files can be placed in the “AUTORUNC” folder without any problem. If there
are, turning on projector power in step 6 below will start a slideshow of the images.
4.
Turn off the projector.
5.
If a USB flash drive or some other USB device is connected to the projector’s
USB-A port, disconnect it.
6.
Turn on the projector.
z This will automatically project the file(s) you put in the AUTORUNC folder in step 3 above.
36
File Viewer Troubleshooting
Problem Cause and Required Action
File Viewer does not appear when I
connect USB flash drive to the
Data Projector’s USB-A port.
z The USB flash drive you are connecting may have a format that cannot be
recognized by the Data Projector. Connect the USB flash drive to your
computer to check if its file system is FAT or FAT32. If it isn’t, reformat the
USB flash drive to FAT or FAT32. Note that doing so will delete all of the
data currently in USB flash drive.
z If “Off” is selected for the “Option Settings 2 3 Plug and Play” setting
(page 60), File Viewer will not startup automatically even if a USB flash
drive is connected to the projector’s USB-A port. If this happens, change
the “Plug and Play” setting to “On”.
Some folders and/or files are not
displayed in the file menu.
All the folders and/or files contained in a folder will not be displayed if there
are more than 999 folder and/or files inside the folder. If this happens, reduce
the number of folders and/or files in the folder.
There are multiple devices
connected to the Data Projector via
a USB hub or USB card reader, but
some of the devices are not
recognized.
The Data Projector can recognize up to four drives. If the number of
connected drives is greater than four, the Data Projector will not recognize
the fifth and subsequent drives. Connect memory devices while ensuring that
no more than four drives are connected.
When I connect my digital camera
to the Data Projector via USB,
digital camera memory contents do
not appear.
z The digital camera’s USB mass storage class setting may not be
configured correctly, or you may need to perform some operation on the
camera. Consult the user documentation for your digital camera for
information about the required settings and operations.
z The digital camera may not support USB mass storage class. If it does not,
you will not be able to use Viewer to view digital camera memory contents.
On the Slide Mode file menu,
question marks (?) appear in place
of thumbnails.
Question marks are displayed in place of thumbnails of images that cannot
be projected by File Viewer.
37
File Viewer Error Messages
Problem Cause and Required Action
Folder does not contain any image
files.
There is no displayable folder, or file in the folder you are trying to access with
the File Viewer. Use your computer to check the contents of the folder. For
details about file formats supported for Data Projector playback, see
“Supported Playback Files” (page 18).
This ECA/PtG file cannot be played
back.
There may be an error in the ECA file or PtG file itself. Play back the ECA file
or PtG file using the EZ-Converter FA on your computer and check it.
Cannot display an image file. z You may be trying to play back an image whose format and/or size is not
supported by File Viewer. Check the “Supported Playback Files” (page 18).
z There may be an error in the image file itself. Open the image file on your
computer and check it.
This movie file cannot be played
back.
z You may be trying to play back a movie whose format and/or size is not
supported by File Viewer. Check the “Supported Playback Files” (page 18).
z There may be an error in the movie file itself. Open the movie file on your
computer and check it.
This PDF file cannot be displayed. For information about the types of PDF files that can be displayed by File
Viewer, see “Supported Playback Files” (page 18).
Internal Memory Access Error An error may have been generated by a particular folder or file in projector
internal memory. Perform steps 1 through 8 under “To copy files from a
computer to projector internal memory” (page 19) and then open the
“InternalMem” drive (projector internal memory) on your computer. Check if
all of the folders and files in “InternalMem” open normally. If you experience
trouble with any file or folder, delete it.
If you cannot open any of the files or folders in projector internal memory with
your computer or if you cannot open the “InternalMem” drive itself, it could
mean there is a problem with the projector internal memory file system. In this
case, perform the procedure under “To format projector internal memory”
(page 22).
Failure due to insufficient internal
memory capacity.
Remaining available projector internal memory capacity is insufficient.
Perform steps 1 through 8 under “To copy files from a computer to projector
internal memory” (page 19) and then open the “InternalMem” drive (projector
internal memory) on your computer. Next, delete files you no longer need.
This file cannot be played back. For information about the types of files that can be displayed by File Viewer,
see “Supported Playback Files” (page 18).
Could not find an image file. There is nothing in projector internal memory or on the connected USB flash
drive, or there is some problem with the file system. Use your computer to
check the contents of projector internal memory or the USB flash drive.
38
Using EZ-Converter FA to Convert PowerPoint Files to ECA or
PtG Files
EZ-Converter FA is computer software for converting PowerPoint files to ECA files or PtG files, which
can be played back using the projector’s File Viewer. EZ-Converter FA supports conversion of files
created with Microsoft Office PowerPoint 2003, 2007 and 2010.
Important!
z Before trying to use EZ-Converter FA, be sure to go to the CASIO website
(http://www.casio-intl.com/support/) and check the information there about minimum
computer system requirements, and conditions governing download and use.
z The procedure below assumes that you already have EZ-Converter FA installed on your
computer.
Note
z Save for certain exceptions (described below), playback and projection of an ECA file or PtG
file normally should be able to reproduce transitions, animations, and other special effects of
the original PowerPoint file.
z Starting a conversion operation with EZ-Converter FA will temporarily change the screen
settings of your computer as shown below. Screen settings will revert back to what they were
after the conversion operation is complete.
z The screen resolution of the ECA file or PtG file will be the resolution specified by the
EZ-Converter FA setting (800 × 600, 1024 × 768, 1280 × 768 or 1280 × 800) when the file
conversion operation starts. For information about configuring this setting, see “To specify the
screen resolution of the ECA file or PtG file” (page 41).
• Conversion of OLE objects (movies, audio, etc.) and VBA objects in a PowerPoint file is not
supported.
• Conversion of timer and repeat operations in a PowerPoint file animation is not supported.
• An animation in a PowerPoint file is converted up to the time specified by “To specify the
maximum animation display time” (page 41), and everything after that is cut. When the point
up to which the animation was converted is reached during playback of the converted file,
playback will pause, and you will have to press the [ENTER] key to advance to the next step.
• The source PowerPoint file plays when you convert a file with EZ-Converter FA. If there is no
change on the screen for about three consecutive seconds during this playback, say
between Points A and B, for example, the effect at Point B in the original file is ignored and
not converted. When Point B is reached during playback of the converted file, playback will
pause, and you will have to press the [ENTER] key to advance to the next step.
Operating System: Changes:
Windows XP z Screen resolution changes to 800 × 600, 1024 × 768, 1280 × 768 or
1280 × 800.
z Display card hardware acceleration is disabled.
Windows Vista or
Windows 7
z Screen resolution changes to 800 × 600, 1024 × 768, 1280 × 768 or
1280 × 800.
z Windows changes to the Basic mode (Windows Aero TM disabled).
Windows 8 z Screen resolution changes to 800 × 600, 1024 × 768, 1280 × 768 or
1280 × 800.
40
7.
Configure the settings as required on the dialog box.
zThe following describes the meanings and settings of each of the items that appear on the
dialog box.
8.
After configuring all the settings you want, click [OK].
zThis will start playback of the PowerPoint file and start converting it to an ECA file or PtG file.
zThe “Conversion complete.” message will appear when file conversion is complete.
zIf you have other PowerPoint files you want to convert, repeat steps 4 through 7.
zTo check the contents of an ECA file or PtG file, perform the procedure under “To play back
an ECA file or PtG file on your computer” (page 41).
9.
After you are finished converting all the files you want, click the close button in
the upper right corner of the EZ-Converter FA window.
Dialog Box Item Description
Input File Shows the name of the PowerPoint file selected in step 6. The setting of this item
cannot be changed.
Output Drive Shows the drive name of the removable disk (USB flash drive or memory card)
connected to the computer in step 2. When you have multiple removable disks
connected to your computer, you can click the [T] button and select the name of the
drive where you want to save the converted file. A converted file is stored in the folder
named ECA (in the case of an ECA file) or PtG (in the case of a PtG file) on the drive you
specify here.
Under initial default settings, if there are no removable disks connected to the
computer, the resulting file will be saved in the same location (drive and folder) as the
original PowerPoint file. Click the [Browse] button and change the save destination, if
you want.
Output File Name Shows the file name of the converted file, along with the path from the drive name.
Except for the extension, the file name is the same as the PowerPoint file name. The
setting of this item cannot be changed.
ECA/PtG Specifies the format of the converted file (Default: ECA).
41
To specify the screen resolution of the ECA file or PtG file
1.
Right-click the left side of the EZ-Converter FA window.
2.
On the menu that appears, click “Output Resolution”.
3.
On the sub-menu that appears, select the resolution you want.
zSelect 1280 × 800 or 1280 × 768. If you cannot select the 1280 × 800 or 1280 × 768
resolution, select 1024 × 768.
zFor a PtG file, select 1024 × 768 or 800 × 600.
zThe setting you select here remains in effect until you change it.
To specify the maximum animation display time
1.
Right-click the left side of the EZ-Converter FA window.
2.
On the menu that appears, click “Max Animation Display Time”.
3.
On the sub-menu that appears, select a maximum animation display time value
(in seconds).
zAvailable sub-menu options are 10 seconds, 20 seconds, 30 seconds, and 60 seconds.
zThe option you select remains in effect until you change it.
To play back an ECA file or PtG file on your computer
1.
On your computer, start up EZ-Converter FA.
zThis will display the EZ-Converter FA window.
2.
Click the button at the top of the EZ-Converter FA window.
zThis will display two more buttons as shown below.
3.
Click the button.
zThis displays a dialog box for opening files.
42
4.
Select the ECA file or PtG file you want to play back and then click the [Open]
button.
zThis will display a control panel at the top of the screen.
zDuring file playback, you can use the control panel buttons to perform the operations
described below.
To do this: Perform this operation:
Go to the previous page Click the button.
Go to the next page Click the button.
Jump to a specific page 1. Click the button and then click “Slide Viewer” on the menu that appears.
2. On the page menu that appears, click the thumbnail of the destination page
and then click [OK].
Display help Click the button and then click “Help” on the menu that appears.
Exit file playback Click the button, or click the button and then click “Exit” on the menu
that appears. You could also press the [ESC] button on your computer keyboard
to stop playback.
Control panel
43
USB Display Function Overview
Connecting the projector to a computer with a USB cable* enables projection of the computer’s
screen contents. This supports projection of screen contents of even small computers that have only a
USB port, but no RGB, HDMI, or other type of video output terminal.
*To use the USB Display function, connect the computer to the projector’s USB-B port.
Minimum Computer System Requirements
zSupported Operating Systems
Windows XP SP3, Windows Vista SP1 (32bit), Windows 7 SP1 (32bit, 64bit), Windows 8/8.1 (64bit),
or Mac OS (10.6, 10.7, 10.8, 10.9)
Note, however, that functions may be limited by the operating system being used.
zUSB Type A port (USB 2.0) equipped.
Important!
zLog into Windows with admin priv unction. You will not be able ileges to use the USB display f
to use USB display if you are logged into Windows with a non-admin account.
Projecting Computer Screen Contents Over a USB Connection
The operation you need to perform the first time you connect to a computer to project its display
contents (described below) depends on whether the computer is running Windows or Mac OS. After
that, use the procedure under “To project computer screen contents over a USB connection after the
first time” (page 47), which is the same for any operating system.
Perform one of the procedures below, depending on your computer’s operating system.
Projecting with the USB Display Function
(USB Model Only)
44
To project Windows computer screen contents over a USB
connection for the first time
1.
Press the [INPUT] key. This will display the “Input” dialog box.
2.
Use the [T] and [S] keys to select “USB Display” and then press the [ENTER]
key.
zThis will cause the USB Display standby screen to be projected.
3.
While your computer is running, use a commercially available USB cable to
connect the projector’s USB-B port (Micro USB B type) to your computer’s USB
port.
zThe location of the USB-B port of this projector is indicated by “*
2” in the illustration under
“Connecting Projector Cables” (page 11).
zThis will mount the projector onto your computer as a virtual CD-ROM drive, which is
represented by a “USB_DISPLAY” drive icon on your computer’s desktop.
zCASIO USB Display will start up automatically and display a window like the one shown below
on your computer. Projection of the computer screen contents will also start at the same time.
Note
zIf CASIO USB Display does not start up automatically, use Explorer to navigate to the
USB_DISPLAY drive. Right-click the drive and then click “Auto Play” on the menu that
appears.
zFor information about the types of operations that can be performed at this point, see
“Supported Operations during Projection over a USB connection” (page 46).
Add-on Driver Software for Windows
With Windows, use of some functions of the CASIO USB Display requires installation of the driver
software shown in the table below. For information about how to obtain this software, go to the CASIO
website (http://www.casio-intl.com/support/).
To use this function: Install this driver software:
Audio output function VAC driver (for Windows XP version that does not
support audio level mixer functions)
Extended screen output function VDD driver (for Windows XP and Windows Vista)
45
To project Mac OS computer screen contents over a USB
connection for the first time
1.
Press the [INPUT] key. This will display the “Input” dialog box.
2.
Use the [T] and [S] keys to select “USB Display” and then press the [ENTER]
key.
zThis will cause the USB Display standby screen to be projected.
3.
While your computer is running, use a commercially available USB cable to
connect the projector’s USB-B port to your computer’s USB port.
zThe location of the USB-B port of this projector is indicated by “* 2” in the illustration under
“Connecting Projector Cables” (page 11).
zThis will cause a drive icon named “USB_DISPLAY” to appear on your computer screen.
4.
Double-click the “USB_DISPLAY” drive icon to open it.
5.
Double-click “MAC_USB_Display_V2.pkg” and follow the instructions that
appear on the display to install the application.
zA message prompting you to restart your computer will appear after installation is complete.
Restart your computer. After the restart is complete, you will see a CASIO USB Display icon in
the Dock.
6.
In the Dock, click the CASIO USB Display icon.
zThis will start up CASIO USB Display, which will display the window shown below on your
computer. At the same time, projection of the computer’s screen contents will start.
zFor information about the types of operations that can be performed at this point, see
“Supported Operations during Projection over a USB connection” (page 46).
Add-on Driver Software for Mac OS
With Mac OS, use of some parts of the CASIO USB Display requires installation of the driver software
shown in the table below. For information about how to obtain this software, go to the CASIO website
(http://www.casio-intl.com/support/).
To use this function: Install this driver software:
Audio output function Sound flower
Extended desktop output function Syphon-virtual-screen
47
To project computer screen contents over a USB connection
after the first time
1.
Turn on and start up the projector and computer.
2.
Press the [INPUT] key. This will display the “Input” dialog box.
3.
Use the [T] and [S] keys to select “USB Display” and then press the [ENTER]
key.
zThis will cause the USB Display standby screen to be projected.
4.
Use a USB cable to connect the projector’s USB-B port to your computer’s USB
port.
zThe CASIO USB Display will startup automatically on the computer and start projection of the
computer screen contents.
Note
zIf the above operation does not cause CASIO USB Display to start up automatically, perform
either of the operations below on your computer, depending on its operating system.
Windows:
Use Explorer to navigate to the USB_DISPLAY drive. Right-click the drive and then click “Auto
Play” on the menu that appears.
Mac OS:
In the Dock, click the CASIO USB Display icon.
48
You can connect a CASIO graphing calculator to the Data Projector using a USB cable and project the
calculator’s screen image with the Data Projector. USB connection of the following CASIO graphing
calculators is supported.
zClassPad II (fx-CP400)
zClassPad 330 PLUS
zfx-CG series
zfx-9860G series
zfx-9860GII series
zfx-9750GII
zGRAPH 95/85/85 SD/75/75+/35+
To project the screen image of a graphing calculator
1.
While the projector is turned on, connect the USB cable that comes with the
graphing calculator to the projector’s USB-A port and the graphing calculator’s
USB port.
2.
On the projector, press the [INPUT] key. This will display the “Input” dialog box.
3.
Use the [T] and [S] keys to select “Viewer” and then press the [ENTER] key.
4.
Use the [T] key to select “CASIO USB Tool” and then press the [ENTER] key.
5.
On the graphing calculator, perform the operation required for projection.
zFor details about this operation, refer to the use documentation that comes with your
calculator.
Important!
zIf the calculator does not operate properly after you connect it to the Data Projector, try
disconnecting the USB cable from the calculator and then reconnecting it. If this does not
correct the problem, disconnect the USB cable from both the Data Projector and the
calculator. Turn the Data Projector off and then back on again, and then re-connect the
calculator.
Projecting the Screen Image of a Graphing Calculator
(USB Model Only)
49
Operating the Projector
This section explains how to use the remote controller to perform projector operations.
To use manual keystone correction (KEYSTONE)
The projector has a keystone correction feature that prevents
distortion of the projected image when projecting from an
angle. The projector detects when it is at a vertical angle to the
screen and performs keystone correction automatically.
You can use the [KEYSTONE +] and [KEYSTONE –] keys to
adjust keystone correction manually.
To zoom an image (D-ZOOM)
1.
Press the [D-ZOOM] key.
z This will enlarge the center of the projected image one step.
2.
To zoom in on the center of the projected image more, press the [D-ZOOM] key
again.
z Each press of [D-ZOOM] zooms in (increases the zoom factor). Holding down [D-ZOOM]
continuously scrolls the zoom factor.
3.
While an image is zoomed, use the [S
S
S
SS], [ ], [
T
T
T
TT W], and [X] keys to scroll the view
to other parts of the image.
4.
To exit the zoom operation, press the [ESC] key.
To adjust the volume level (VOLUME)
1.
Press the [VOLUME +] or [VOLUME –] key.
z This causes the “Volume” screen to appear on the projected image.
2.
Press the [VOLUME +] key to increase the volume, or the [VOLUME –] key to
lower the volume.
3.
After the setting is the way you want, press the [ESC] key.
Output Image and Audio Operations
50
To mute the audio (VOLUME)
1.
Press the [VOLUME +] or [VOLUME –] key to display the “Volume” screen.
2.
Press the [ENTER] key.
zThis stops output from the speaker.
3.
To restore the audio, press the [VOLUME +] or [VOLUME –] key.
To momentarily blank the image and mute the audio (BLANK)
1.
Press the [BLANK] key.
zThis blanks the screen by displaying the blank screen image specified by the Setup Menu
“Blank Screen” setting (page 59) and mutes the audio.
2.
To resume normal image and sound, press the [BLANK] key (or [ESC] key).
To freeze an image (FREEZE)
Press the [FREEZE] key to freeze the current input source image. To return to the real-time input
source image, press the [FREEZE] key again or press the [ESC] key.
To auto adjust an image (AUTO)
Press the [AUTO] key.
zPressing the [AUTO] key automatically adjusts the frequency and phase in accordance with the
input signal, which can reduce flickering and other projected image problems.
zThis operation is supported while the input source is Computer (RGB).
51
To change the aspect ratio of the projected image (ASPECT)
Press the [ASPECT] key to cycle through the aspect ratio settings for the projected image.
Available settings depend on your projector model as shown below.
XJ-A242/XJ-A247/XJ-A252/XJ-A257/XJ-M241/XJ-M246/XJ-M251/XJ-M256
Pressing the [ASPECT] key will cycle through settings in accordance with the current input source as
shown below.
XJ-A142/XJ-A147/XJ-M141/XJ-M146/XJ-M151/XJ-M156
Pressing the [ASPECT] key will cycle through settings in accordance with the current input source as
shown below.
Description of Each Setting
Note
zFor details about how the aspect ratio setting affects the projected image, see “Aspect Ratio
Setting and Projection Image” (page 78).
zWhen projecting while “True” is selected as the aspect ratio setting for an RGB signal with a
resolution that is less than SVGA, the image is enlarged to SVGA and projected.
zYou can also change the aspect ratio using the Setup Menu “Screen Settings 3 Aspect
Ratio” setting (page 58).
Important!
zNote that enlarging or reducing the size of an image using the [ASPECT] key for commercial
purposes or public presentation may infringe on the legally protected copyright of the
copyright holder of the original material.
Input Source Pressing the [ASPECT] key will cycle through these settings:
Video, Component, HDMI (DTV) Normal J 16:9 4:3 J J Letter Box
RGB, HDMI (PC) Normal J Full J 16:9 J 4:3 J True
Input Source Pressing the [ASPECT] key will toggle between these settings:
Video, Component, HDMI (DTV) Normal J 16:9 4:3J
RGB, HDMI (PC) Normal J Full J 16:9
Normal: Projects at the projector’s maximum possible size while maintaining the input signal aspect
ratio.
Full: Projects at the projector’s maximum possible size by enlarging or reducing the input signal.
16:9: This setting specifies a 16:9 aspect ratio, which is the same as a movie screen, high-definition
TV, etc. Using this setting when the input signal is a 16:9 image that has been squeezed to a
4:3 image causes the image to be displayed with its normal 16:9 aspect ratio.
4:3: Regardless of the input signal aspect ratio, the image is always resized to an aspect ratio of
4:3 for projection.
True: Projects the input signal at its actual size (1 input source dot equal to one projector output
pixel dot) in the center of the projector’s projection screen. If the input signal resolution
exceeds the projector’s output resolution, the excess is cut off.
Letter Box:This will resize the image horizontally to 1280 dots and project 800 vertical dots of the
center of the image, maintaining the aspect ratio of the input signal.
52
To adjust image brightness (FUNC)
1.
Press the [FUNC] key. On the menu that appears, select “Brightness” and then
press the [ENTER] key.
2.
On the brightness adjustment screen that appears, use the [W] and [X] keys to
adjust brightness.
3.
To hide the window, press the [ESC] key.
To change the color mode (FUNC)
1.
Press the [FUNC] key. On the menu that appears, select “Color Mode” and then
press the [ENTER] key.
zThis displays the color mode selection window. The currently selected color mode is the one
whose button is selected (filled in).
2.
Use the [T
T
T
TT] and [S
S
S
SS] keys to move the highlighting to the color mode you want to
select, and then press the [ENTER] key.
zThis will select the button next to the highlighted color mode name.
zFor details on what each color mode does, see “Image Adjustment 1 3 Color Mode” (page
58).
3.
To hide the window, press the [ESC] key.
Important!
zThe color mode cannot be selected in the following cases.
• When “Off” is selected for the Eco Mode setting (page 53)
53
The following three Eco Mode settings are available to specify whether priority should be given to
low-power, low-noise operation or to projection brightness.
Important!
zWhile “On (Auto)” is selected as the Eco Mode setting, make sure that the brightness sensor
on the top of the projector is not blocked by anything.
zThe local environment and setup conditions affect the brightness sensor, so operation when
“On (Auto)” is selected for the Eco Mode depends on these factors.
To select the Eco Mode
1.
Press the [ECO] key.
zThis causes “Eco Mode” window to appear on the projection screen.
2.
Use the [W] and [X] keys to select the setting you want.
zIf you select “On (Manual)” here, go to step 3. If you select another setting, jump to step 4.
3.
Perform the following steps to adjust the “Eco Level” (the balance between
low-power, quiet operation and projection brightness).
4.
To hide the window, press the [ESC] key.
Note
zWhile “Off” is selected for the Eco Mode setting, you also can specify whether brightness or
color should be given emphasis. For details, see “Image Adjustment 1 3 Eco Off Mode”
(page 58).
Important!
zThe Eco Mode level is fixed whenever the projector is in the 3D input mode (“3D Input Mode
(XJ-M Series Only)”, page 16). Because of this the Eco Mode setting cannot be changed.
Eco Mode (ECO)
On (Auto) : A brightness sensor on the top of the projector senses surrounding light, and
automatically adjusts projection brightness and color accordingly. Brightness is
reduced for darker surroundings, which saves power and reduces operation noise.
On (Manual): Enables manual adjustment to balance the needs of low-power, quiet operation and
projection brightness.
Off : Give top priority to projection brightness.
1Press the [T] key to move the highlighting to the Eco Level.
2Use the [W] and [X] keys to adjust the Eco Level to the setting you want.
Fewer marks gives higher priority to projection brightness. A greater number gives high
priority to low-power, quiet operation.
54
The presentation timer shows a countdown from a preset time value. You can use it to keep track of
how much time has elapsed during your presentation, and to limit a presentation to a preset amount of
time. You can configure the presentation timer so it is displayed in the projected image.
To display the timer
When the timer is not displayed on the projected image, press the [TIMER] key once.
The timer will appear for about five seconds and then disappear automatically if the “Off” is selected
for the “Continuous Display” setting on the timer function menu.
To display the timer function menu
When the timer is not displayed on the projected image, press the [TIMER] key twice. If the timer is
displayed, press the [TIMER] key once.
Use this menu to start, pause, resume, and reset the timer, and to configure various timer settings.
Using the Presentation Timer (TIMER)
56
To pause the timer countdown
1.
Use the [TIMER] key to display the timer function menu.
2.
Select “Pause Timer” and then press the [ENTER] key.
To resume a paused timer countdown
1.
Use the [TIMER] key to display the timer function menu.
2.
Select “Restart Timer” and then press the [ENTER] key.
To reset the timer to its start time
1.
Use the [TIMER] key to display the timer function menu.
2.
Select “Reset Timer” and then press the [ENTER] key.
zThis will reset the time to the “Start Time” setting.
57
Pressing the [MENU] key displays the Setup Menu shown below on the projection screen. You can
use this menu to adjust projected image brightness, contrast, and other settings, and to change
projector settings.
The guidance shows the key operations that can be performed for the currently selected (highlighted)
menu item.
Basic Setup Menu Operations
Setup Menu Settings
z One or more letters (such as RCV) after the menu item name indicates an item that is available only
when one or more particular input source is selected. The letters indicate the input source(s) where
the menu item is available.
R C V: RGB input, : Component input, : S-video input* 1 or Video input, H: HDMI (PC) input,
D F T W: HDMI (DTV) input, : File Viewer, : CASIO USB Tool, : Wireless* 2 or Network* 1,
U: USB Display
z A menu item that does not have any letter after it will be available regardless of the input source.
z after a menu item indicates the item is available only for USB models.
z The initial default setting is indicated by an asterisk (*).
Using the Setup Menu (MENU)
To do this: Perform this operation:
Display the Setup Menu
Exit the Setup Menu
Press the [MENU] key. Pressing the [MENU] key to exit the Setup Menu will save the
settings you configured while it was displayed.
Select a menu item Use the [S] and [T] keys to move the highlighting to the menu that contains the menu
item you want to select and then press the [ENTER] key. Next, use the [S] and [T]
keys to move the highlighting to the menu item you want to select.
Configure the setting of a
menu item
z If a menu item that has options or setting values to the right, use the [ W] and [ X]
keys to change the setting.
z For a menu item that has “Modify [ENTER]” or “OK [ENTER]” to the right, press the
[ENTER] key to display a dialog box for configuring the setting.
* *1 XJ-M Series only 2 XJ-A Series only
Use this menu item: To do this:
Image Adjustment 1 3
Brightness
Adjust projected image brightness.
Image Adjustment 1 3
Contrast
Adjust projected image contrast.
Image Adjustment 1 3
Sharpness (V)
Use this sub-menu to adjust the sharpness of the outlines in the projected image. A
larger value makes the image sharper, while a smaller value makes it softer.
Menu Items
(Main Menu)
Highlighting
Menu Item
(Sub-menu)
Guidance
58
Image Adjustment 1 3
Saturation (V)
Use this sub-menu to adjust the color saturation of the projected image. A larger
value increases color saturation.
Image Adjustment 1 3
Tint (V)
Use this sub-menu to adjust the tint of the projected image.
A larger value makes the overall image more bluish, while a smaller value makes the
overall image more reddish. This setting is supported only when the signal is NTSC
or NTSC4.43.
Image Adjustment 1 3
Color Mode
Select one of the following projected image color modes: “Standard*”, “Graphics”,
“Theater”, “Blackboard”, “Game”.
Image Adjustment 1 3
Color Balance
Select one of the following color balance presets: “Warm”, “Normal*”, “Cold”.
Also can be used to separately adjust red, green, and blue.
Image Adjustment 1 3
Eco Off Mode
When “Off” is selected for the “Option Settings 1 3 Eco Mode” setting, specify
either “Bright” (brightness priority) or “Normal*” (hue priority) as the image quality
setting.
Image Adjustment 1 3
Restore Menu Defaults
Return all of the items in the “Image Adjustment 1” main menu to their initial defaults
for the currently projecting image source.
Image Adjustment 2 3
Vertical Position (RCV)
Adjust the vertical and horizontal positions of the input source image in relation to
the target screen.
Image Adjustment 2 3
Horizontal Position (RCV)
Image Adjustment 2 3
Frequency (R)
When vertical bands appear in the projected image while RGB is selected as the
input source, it means that the frequency setting is not correct. When this happens,
use this setting to adjust the frequency manually. If, for some reason, your manual
frequency settings cause the image input from the computer to disappear from the
projection, you can press the [AUTO] key to perform an auto adjust operation, which
should cause the image to appear.
Image Adjustment 2 3
Phase (R)
Adjust the phase of the RGB input signal when the image flickers because the
projector phase and RGB input signal phase do not match.
Image Adjustment 2 3
Overscan (CVD)
Adjust the overscan amount for an input video signal within the range of 0% to 5%*.
The size of the border area displayed on the projection screen depends on the
setting value. A smaller value results in a wider border area as shown below.
Image Adjustment 2 3
Restore Menu Defaults
(RCVD)
Return all of the items in the “Image Adjustment 2” main menu to their initial defaults
for the currently projecting image source.
Volume Adjustment 3
Volume
See “To adjust the volume level (VOLUME)” (page 49) for more information.
Volume Adjustment 3
Restore Menu Defaults
Return the Volume setting to its initial default for the currently projecting image
source.
Screen Settings 3
Keystone Correction
Use this sub-menu to perform vertical keystone correction of the projected image.
Screen Settings 3
Aspect Ratio (RCVHD)
Select an aspect ratio setting for the projected image.
See “To change the aspect ratio of the projected image (ASPECT)” (page 51) for
more information.
Use this menu item: To do this:
Display range at 5%
Display range at 0%
59
Screen Settings 3
Projection Mode
Specify whether projection will be from the front of the screen or the back of the
screen.
Front*: Select this option to project from the front of the screen.
Rear: Select this option to project from the back of the screen. This setting flips the
front projected image horizontally.
Screen Settings 3
Ceiling Mount
Set up the projector to be hung from a ceiling.
On: Select when the projector is hung from a ceiling. Since the bottom of the
projector is upwards, the projected image is flipped both horizontally and
vertically.
Off*: Select when the projector is used on a desktop. This projects the image
assuming that the top of the projector is upwards.
Screen Settings 3
Startup Screen
Specify whether or not a startup screen should be projected whenever projector
power is turned on, and select the image to be used as the startup screen.
Logo: Projects a logo built into the projector or a user logo (page 74) as the startup
screen.
None*: Disables startup screen projection.
Screen Settings 3
No Signal Screen
Select one of the following as the projection image whenever there is no input signal
being input to the projector: “Blue”* (blue screen), “Black” (black screen), “Logo”
(projector built-in logo, or user logo, page 74).
Screen Settings 3
Blank Screen
Select one of the following as the projection image whenever the [BLANK] key is
pressed: “Blue”* (blue screen), “Black” (black screen), “Logo” (projector built-in
logo, or user logo, page 74).
Screen Settings 3
Restore Menu Defaults
Return all of the items in the “Screen Settings” main menu to their initial defaults for
the currently projecting image source.
Input Settings 3
COMPUTER Terminal (RC)
Specify the method to be used to identify the COMPUTER terminal input signal.
Auto*: Projector automatically identifies the COMPUTER terminal input signal.
RGB: Always assumes the COMPUTER terminal input signal is an RGB signal.
Component: Always assumes the COMPUTER terminal input signal is a component
video signal.
Input Settings 3
Video Signal (V)
Input Settings 3
S-Video Signal (V)
(XJ-M Series only)
Specify the method to be used to identify the video signal being input to the
projector (XJ-A Series: AV terminal input signal, XJ-M Series: VIDEO terminal or
S-VIDEO terminal input signal).
Auto*: Projector automatically identifies the video input signal.
NTSC, NTSC4.43, PAL, PAL-M, PAL-N, PAL60, SECAM:
Always assumes the video input signal is the specified video signal type.
Input Settings 3
Signal Name Indicator
Specify whether the newly selected input signal type should be displayed (On*) or
not displayed (Off) when the [INPUT] key is pressed to change the input signal.
Input Settings 3
Restore Menu Defaults
Return all of the items in the “Input Settings” main menu to their initial defaults for the
currently projecting image source.
Option Settings 1 3
Auto Keystone Correction
Turn auto keystone correction on (On*) or off (Off).
Option Settings 1 3
Auto Adjust (R)
Specify whether the projector should detect the RGB input signal type (resolution,
frequency) and adjust the projection image accordingly.
On*: Auto Adjust enabled.
Off: Auto Adjust disabled.
Option Settings 1 3
Eco Mode
See “Eco Mode (ECO)” (page 53).
Option Settings 1 3
Auto Power Off
Specify the amount of time of projector operation and input signal inactivity to be
allowed before Auto Power Off is triggered to turn off projector power automatically.
Auto Power Off can be disabled, if you want.
5 min, 10 min*, 15 min, 20 min, 30 min: Time until Auto Power off is triggered.
Off: Disables Auto Power Off.
Use this menu item: To do this:
60
Option Settings 1 3
Password
See “Password Protection” (page 62).
Option Settings 1 3
Direct Power On
Enable (On) and disable (Off*) projector auto power on as soon as the projector’s AC
adapter is plugged into a power outlet.
Option Settings 1 3
Language
Specify the display language.
English, French, German, Italian, Spanish, Swedish, Portuguese, Dutch, Norwegian,
Polish, Finnish, Czech, Turkish, Russian, Chinese (Simplified), Chinese (Traditional),
Korean, Japanese, Thai, Indonesian, Malay, Vietnamese, Lithuanian
Important!
zUSB Model Users
When using certain USB model functions, some menus and messages may
be displayed in English, regardless of the language selected here.
Option Settings 1 3
Restore Menu Defaults
Return all of the items in the “Option Settings 1” main menu to their initial defaults for
the currently projecting image source.
Option Settings 2 3
Zoom Memory
(XJ-A Series only)
Specify whether the projector should remember the current zoom (projected image
size) setting when you press the [P] (Power) key to turn off projector power.
Select “On*” to have the projector remember the current zoom setting when the [P]
(Power) is pressed to turn off power and restore it the next time power is turned on.
Option Settings 2 3
Plug and Play
Specify whether the projector input source should switch automatically (Plug and
Play: On*) when a supported external USB device is connected to the projector’s
USB-A port.
Note
zRegardless of the setting of this item, plug-and-play is disabled while the
projector is in the 3D input mode. See “3D Input Mode (XJ-M Series Only)”
on page 16 for information.
Option Settings 2 3
Audio Out
Use this sub-menu to specify whether audio input from the input sources below
should be output to the speaker (Speaker*) or output to an external destination
(Line)*
1.
zFile Viewer (Movie playback audio)
zWireless or Network (Video stream projection movie audio)
zUSB Display
zHDMI
*1 When Line is specified, an XJ-A Series projector will output audio from its AV
terminal, while an XJ-M Series projector will output from its AUDIO OUT terminal.
Option Settings 2 3
High Altitude
Turn the high-altitude fan speed setting on or off in accordance with the altitude of
the area where you are using the projector.
On: Select this setting when using the projector in a high altitude (1,500 to
3,000 meters / 5,000 to 10,000 feet above sea level) area where air is thin. This
setting increases cooling efficiency.
Off*: Select this setting at normal altitudes (up to 1,500 meters / 5,000 feet).
Important!
zDo not use this projector at altitudes greater than 3,000 meters (10,000 feet)
above sea level.
Option Settings 2 3
Control Panel Lock
Disable projector unit key operations.
See “Control Panel Lock” (page 65) for more information.
Use this menu item: To do this:
61
Option Settings 2 3
Closed Caption (V)
Use this sub-menu to specify whether to display closed captions when projecting a
video signal that includes them.
Off*: Closed captions not displayed.
CC1, CC2, CC3, CC4: Indicates the current closed caption output setting (CC1,
CC2, CC3, and CC4).
Note
zKeystone correction does not affect displayed closed caption text.
Option Settings 2 3
Timer Function
Display the timer function menu. For details, see “Using the Presentation Timer
(TIMER)” (page 54).
Option Settings 2 3
Restore Menu Defaults
Return all of the items in the “Option Settings 2” main menu to their initial defaults for
the currently projecting image source.
Multimedia Settings 3
Autorun
Specify whether to use (Enable*) or not use (Disable) the autorun function. For
details, see “Autorun” (page 34).
Multimedia Settings 3
Functions (F)
Display the same menu (Function Menu) that appears when the remote controller’s
[FUNC] key is pressed.
Multimedia Settings 3
Internal Storage Function
(RCVHD)
Access projector internal memory from a computer. For details, see “To copy files
from a computer to projector internal memory” (page 19).
Network Settings Access projector wireless LAN connection setting and network setting items. For
details, see the separate “Network Function Guide”.
Operational Info (RCVHDFT) Display the projector information below.
Input Signal, Signal Name, Resolution, Horizontal Frequency, Vertical Frequency,
Scan System, Light Time, Version (projector ROM version)
Restore All Defaults 3
Unit Operating Time
Display the cumulative operating time of this unit.
This time cannot be initialized.
Restore All Defaults 3
Restore All Defaults
Initialize all Setup Menu item settings, except for those below.
Option Settings 1 3 Language, Option Settings 1 3 Power On Password,
Operational Info 3 Light Time, Operational Info 3 Version,
Restore All Defaults 3 Unit Operating Time
Use this menu item: To do this:
62
The operations described below can be password protected on the projector. You can have only one
password assigned to the projector at any time, and the same password is used for operations.
zProjector startup protection
The projector can be configured so a dialog box prompting input of the password is displayed
whenever the projector is turned on. In this case, further operation of the projector is not possible
unless the correct password is input. This protects against unauthorized use of the projector.
zUsing projector internal storage
Attempting to access the projector internal storage function (page 19) from the Setup Menu causes
a password input dialog box to appear. This protects against inadvertent and unauthorized deletion
or replacement of files in projector internal memory.
Use the “Power On Password” and “Internal Storage Password” settings to turn password protection
for the above operations on or off individually.
Using the Password Feature
Note the following precautions whenever you use the password feature.
z The password feature protects against unauthorized use of the projector. Note that it is not an
anti-theft measure.
z You will need to enter the initial factory default password the first time you use the projector after
turning on the password feature. Change the initial factory default password to a different one of
your choice as soon as possible after turning on the password feature.
z Remember that password operations are always performed using the remote controller, so you
should take care not to lose or misplace the remote controller.
z Also note that you will not be able to input the password if the remote controller batteries are dead.
Replace the remote control batteries as soon as possible after it starts to go low.
If you forget your password...
If you forget the password, you will need to bring the following two items to your CASIO distributor to
have the password cleared. Note that you will be charged to have the password cleared.
Note that your CASIO distributor will not be able to clear the password of your projector unless you
bring both of the items listed above.
Also, keep the projector’s warranty in a safe place.
Important!
z Having your password cleared using the procedure described above will return all of the
settings of your projector, except for the Light Time, to their initial factory defaults.
Keep a written record of your password!
You will not be able to use the projector if you forget its password. We strongly suggest that you keep
a written or other type of record of the password so you can look it up when necessary.
Password Protection
1. Personal identification (original or copy of your driver’s license, employee I.D., etc.)
2. Projector unit
63
To change the password
1.
Press the [MENU] key to display the setup menu.
2.
Use the [T
T
T
TT] key to select “Option Settings 1”, and then press the [ENTER] key.
3.
Use the [T
T
T
TT] key to select “Password”, and then press the [ENTER] key.
zThis will display a dialog box prompting you to enter the current password.
4.
Enter the current password.
zThe password of your projector is not really a “word” made up of letters, but rather a
sequence of remote controller key inputs.
zIf the projector is still protected by the factory default password, perform the key operation
shown below to enter it.
5.
After entering the current password, press the [ENTER] key.
zThis displays the Password screen.
6.
Use the [T
T
T
TT] key to select “Change Password”, and then press the [ENTER] key.
zThis will display a dialog box prompting you to enter the new password.
7.
Enter a key sequence up to eight key operations long.
zYou can use any of the following keys as part of your password key sequence.
[INPUT], [MENU], [BLANK], [FREEZE], [ECO], [VOLUME +], [VOLUME –], [D-ZOOM +],
[D-ZOOM –], [KEYSTONE +], [KEYSTONE –], [S], [T], [ ], [W X], [TIMER], [AUTO], [ASPECT],
[FUNC]
8.
After entering the new password, press the [ENTER] key.
zThis will display a dialog box prompting you to enter the same password again.
9.
Re-enter the same password key sequence you entered in step 7 and then press
the [ENTER] key.
zThe message “Your new password has been registered.” indicates that the password has
been changed. Press the [ESC] key.
zIf the password you entered in this step is different from the one you entered in step 7, the
message “The password you input is wrong.” appears. Press the [ESC] key to return to step 7.
[ ]S] [T] [W] [X] [S] [T] [W] [X
64
To change the power on password setting
1.
Perform steps 1 through 5 under “To change the password” (page 63) and
display the Password screen.
2.
After confirming that “Power On Password” is selected, use the [W
W
W
WW] and [X
X
X
XX] keys
to select either the “On” or “Off” setting.
z Changing the setting from “Off” to “On” will cause the “Prompt for password when power is
turned on?” dialog box to appear. Press the [ENTER] key to confirm that you want to turn on
power on password protection, or [ESC] to exit the dialog box without changing the setting.
3.
After you are finished, press the [MENU] key to exit the setup menu.
To change the projector internal storage function password
1.
Perform steps 1 through 5 under “To change the password” (page 63) and
display the Password screen.
2.
Press the [T
T
T
TT] key to select “Internal Storage Password”.
3.
Use the [W
W
W
WW] and [X
X
X
XX] keys to select “On” or “Off”.
z Changing the setting from “Off” to “On” will cause the “Prompt for password when an internal
storage operation is performed?” dialog box to appear. Press the [ENTER] key to confirm that
you want to turn on internal storage password protection, or [ESC] to exit the dialog box
without changing the setting.
4.
After you are finished, press the [MENU] key to exit the setup menu.
65
Control panel lock disables (locks) all of the projectors keys, except for the [P] (Power) key. This limits
projector operation to the remote controller, which protects against inadvertent mis-operation.
To lock the control panel
1.
Press the [MENU] key to display the setup menu.
2.
Use the [T
T
T
TT] key to select “Option Settings 2”, and then press the [ENTER] key.
3.
Use the [T
T
T
TT] key to select “Control Panel Lock”.
4.
Use the [W
W
W
WW] key to select “On”.
5.
When the confirmation dialog box appears, press the [ENTER] key.
z This disables (locks) all projector keys except for the [P] (Power) key.
6.
After you are finished, press the [MENU] key to exit the setup menu.
Note
z Even if the control panel is locked, you can clear a warning message (page 68) that appears on
the projection screen by pressing the projector’s [ESC] key.
To unlock the control panel
Perform either of the following operations.
z On the projector, hold down the [T] key until the message “Control panel was unlocked.” appears.
z To use the remote controller to unlock the control panel, perform the procedure under “To lock the
control panel” above. In step 4, press the [X] key of the remote controller to select “Off” and then
press the [MENU] key.
Control Panel Lock
66
Cleaning the Projector
Make it a habit to clean the projector at regular intervals as described in this section. Before cleaning
the projector, be sure to unplug it from the power outlet and make sure it is cooled down completely.
Wipe the exterior of the projector with a soft cloth that has been moistened in a weak solution of water
and a mild neutral detergent. Be sure to wring all excess moisture from the cloth before wiping.
Never use benzene, alcohol, thinner, or any other volatile agent for cleaning.
Carefully wipe the lens with a commercially available lens cloth or optical lens paper, like those for
eyeglasses or camera lenses. When cleaning the lens, do not apply undue force and take care to avoid
damaging the lens.
Dust and dirt tend to collect around the intake vents. Because of this, you should use a vacuum
cleaner to clean away accumulated dust and dirt periodically as shown below.
Important!
z Continued use of the projector after dust has accumulated around the intake vents can cause
overheating of internal components and lead to malfunction.
z Certain operating conditions also can cause dirt and dust to accumulate around the
projector’s exhaust vents (XJ-A Series: exhaust vents, XJ-M Series: exhaust and airflow
vents). If this happens, use the same procedure as that described above to clean the exhaust
vents.
Cleaning the Projector Exterior
Cleaning the Lens
Cleaning Vents
XJ-A Series
XJ-M Series
67
Troubleshooting
Indicators keep you informed about the current operational status of the projector. The following
shows what the indicators look like when operation is normal.
When a warning message appears on the projection screen, or when the POWER/STANDBY, LIGHT,
and TEMP indicators are lit or flashing in a pattern other than those shown above, it means that a
projector error has occurred. For details, see “Error Indicators and Warning Messages” (below).
Indicators
When the indicators appear
like this: It means this:
POWER/
STANDBY LIGHT TEMP You have just plugged the AC power cord into a power outlet. Wait
until the projector enters the standby state (see below) before trying
to turn on power.
zzz
Red Amber Amber
z c c Standby state: The AC power cord is plugged in and the projector is
in standby.
Red
z z Projector is warming up after being turned on.
Green Amber Amber
z c c Projector is on and standing by for use.
“Off” is selected for the projector’s Eco Mode (page 53) setting.
Green
z z c Projector is on and standing by for use.
“On (Auto)” or “On (Manual)” is selected for the projector’s Eco Mode
(page 53) setting.
Green Green
c c Projector is performing internal power down processes.
Red
z : Lit : Flashing c : Unlit
68
Warning messages and indicators let you know what the problem is when a projector error occurs.
zWhen an error occurs, wait until the fan stops before unplugging the AC power cord. If you unplug
the AC power cord while the fan is still operating, an error may occur when you plug the AC power
cord back in.
zPress the [ESC] key to clear the warning message.
Error Indicators and Warning Messages
Indicator/Error Message Description and Required Action
POWER : Green steady The projector’s internal temperature is very high. Perform the following
steps.
1Check for any blocking of the projector’s intake vents and exhaust
vents, and make sure that there is sufficient space around the
projector. See “Setup Precautions” (page 10).
2If there is dust accumulated around the intake vents and/or exhaust
vents, turn off the projector and remove it. See
“Cleaning the
Projector” (page 66).
LIGHT : –
TEMP : –
Message : Internal temperature is too
high. Check projector air
vents for blockage.
POWER : Green steady J
Red steady
Power has turned off automatically due to internal overheating. Perform
the following steps.
1Check for any blocking of the projector’s intake vents and exhaust
vents, and make sure that there is sufficient space around the
projector. See “Setup Precautions” (page 10).
2If there is dust accumulated around the intake vents and/or exhaust
vents, remove it. See “Cleaning the Projector” (page 66).
If there is no problem with the projector’s vents, confirm that the POWER/
STANDBY indicator is lit red (without flashing), and then turn power back
on again. If the error occurs again when you turn power back on, contact
your retailer or nearest authorized CASIO Service Center.
LIGHT : –
TEMP : –
Message : Internal temperature is too
high. The projector will
turn off.
POWER : Red steady Power has turned off automatically due to a fan problem. Confirm that the
POWER/STANDBY indicator is lit red (without flashing) and that the fan
has stopped. After checking the POWER/STANDBY indicator, disconnect
the power cord from the projector and wait for all of the projector’s
indicators to go out. Next, reconnect the power cord and turn projector
power back on.
If the error occurs again when you turn power back on, contact your
retailer or nearest authorized CASIO Service Center.
LIGHT : Red steady
TEMP : Red steady
Message : There is a problem with
the fan. The projector will
turn off.
POWER : Red steady Power has turned off automatically due to a system problem. After
confirming that the POWER/STANDBY indicator is lit red (without
flashing), disconnect the power cord from the projector and wait for all of
the projector’s indicators to go out. Next, reconnect the power cord and
turn the projector back on.
If the error occurs again when you turn power back on, contact your
retailer or nearest authorized CASIO Service Center.
LIGHT : –
TEMP : Red steady
Message : A system problem has
occurred. The projector
will turn off.
POWER : Green steady A system problem has occurred, which may cause problems with some
functions. Turn off the projector, disconnect the power cord from the
projector and wait for all of the projector’s indicators to go out. Next,
reconnect the power cord and turn the projector back on.
If the error occurs again when you turn power back on, contact your
retailer or nearest authorized CASIO Service Center.
LIGHT : –
TEMP : –
Message : There is some problem
with the system.
The audio function may
not operate correctly.
69
POWER : Green steady The USB connection or LAN connection was terminated because of a
problem with the USB port or LAN terminal. Turn off the projector and
then turn it back on again.
If the error occurs again when you turn power back on, contact your
retailer or nearest authorized CASIO Service Center.
LIGHT : –
TEMP : –
Message : Some problem occurred
with the USB port or LAN
terminal.
POWER : Green steady Zoom and focus cannot be performed due to some trouble in the optical
drive circuit. Turn off the projector and then turn it back on again.
If the error occurs again when you turn power back on, contact your
retailer or nearest authorized CASIO Service Center.
LIGHT : –
TEMP : –
Message : Zoom and focus cannot
be performed for some
reason. Try turning the
projector off and then
back on again.
If this message reappears,
request servicing.
POWER : Red steady The projector was turned off automatically due to some problem that was
probably caused by external digital noise or some other reason. Confirm
that the POWER/STANDBY indicator is lit red (without flashing). After
checking the POWER/STANDBY indicator, disconnect the power cord
from the projector and wait for all of the projector’s indicators to go out.
Next, reconnect the power cord and turn projector power back on.
If the error occurs again when you turn power back on, contact your
retailer or nearest authorized CASIO Service Center.
LIGHT : –
TEMP : Red steady
Message : –
POWER : Red steady The projector was turned off automatically because the light source unit
turned off or did not turn on. After confirming that the POWER/STANDBY
indicator is lit red (without flashing), unplug the power cord. Wait for a
short while and then plug it back in and turn on the projector again.
If the error occurs again when you turn power back on, contact your
retailer or nearest authorized CASIO Service Center.
LIGHT : Red flashing
(0.5-second interval)
TEMP : Red flashing
(0.5-second interval)
Message : –
POWER : Red steady Power has turned off automatically due to a projector memory error.
Confirm that the POWER/STANDBY indicator is lit red (without flashing).
After checking the POWER/STANDBY indicator, disconnect the power
cord from the projector and wait for all of the projector’s indicators to go
out. Next, reconnect the power cord and turn projector power back on.
If the error occurs again when you turn power back on, contact your
retailer or nearest authorized CASIO Service Center.
LIGHT : Not lit or red flashing
TEMP : Red flashing
(2-second interval)
Message : –
POWER : Red steady Power has turned off automatically because the light source unit cover is
open. Perform the following steps.
1After confirming that the POWER/STANDBY indicator is lit red (without
flashing), disconnect the power cord from the projector.
2Check to make sure that the light source unit cover is closed.
3Plug the power cord back in and turn the projector back on again.
If the error occurs again when you turn power back on, contact your
retailer or nearest authorized CASIO Service Center.
LIGHT : –
TEMP : Amber flashing
(1-second interval)
Message : –
Indicator/Error Message Description and Required Action
70
Check the following items whenever you experience any problem with the projector.
Projector Troubleshooting
Problem Cause and Recommended Action
Power does not turn on. zIf the POWER/STANDBY indicator is not lit, the AC power cord is not connected
correctly. Connect the AC power cord correctly.
zIf the TEMP or LIGHT indicator remains flashing or lit, it means some type of error
has occurred. See “Error Indicators and Warning Messages” (page 68).
No image is projected or
the projected image is
abnormal.
zThe computer or video device connected to the projector is not turned on or it is
not outputting a video signal. Make sure the connected computer or video device
is turned on, and perform the required operation on it to output a video signal.
zThe correct output source is not selected on the projector. On the projector, select
the correct input source that corresponds to the connected device.
zImages may not project correctly when you have the component output terminal of
a video device connected to the COMPUTER terminal of the projector. With an
XJ-A Series projector, connect the video device to the AV terminal. For an XJ-M
Series projector, connect to the VIDEO or S-VIDEO terminal.
Image color or display is
very abnormal.
The wrong option (“Component” or “RGB”) may be selected for the “Input Settings J
COMPUTER Terminal” setting on the setup menu. The image will not be projected
correctly if “Component” is selected while the projector’s COMPUTER terminal is
connected to the RGB output terminal of a computer, or if “RGB” is selected while the
projector’s COMPUTER terminal is connected to the component video output
terminal of a video device. On the setup menu, select “Auto” for the “Input Settings J
COMPUTER Terminal” setting. See page 59.
I can’t understand
messages or menus
because they are the
wrong language.
Perform the following operation to select the language you want. See page 60.
1. Press the [MENU] key to display the setup menu.
2. If the input signal is HDMI, press [T] four times and then press the [ENTER] key. If
the input signal is not HDMI, press [T] five times and then press the [ENTER] key.
3. Press [S] twice and then press the [ENTER] key to display the language selection
menu.
4. Use the [T] and [S] keys to move the highlighting to the language you want to
select and then press the [ENTER] key.
5. Press the [MENU] key to exit the setup menu.
No sound zThe projector’s volume level setting may be too low or muted. Press the remote
controller [VOLUME] key and then use [W] and [X] to adjust the volume level. See
page 49.
zThe volume level setting of the device connected to the projector is too low or the
other device is not outputting audio. Adjust the volume level of the connected
device.
zThe audio output of the connected device may not be connected correctly to the
projector’s AV terminal (XJ-A Series) or AUDIO IN terminal (XJ-M Series). Check
the connection. See “Connecting Projector Cables” (page 11).
zWhen the input source is HDMI, File Viewer, Wireless, Network or USB Display,
“Line” may be selected for the “Option Settings 2 J Audio Out” setting on the
setup menu. Change the “Audio Out” setting to “Speaker”. See page 60.
Strange color The input signal may not match projector settings. Try doing the following.
– Use the [BRIGHT] key to adjust image brightness.
– Use the [COLOR MODE] key to change the color mode.
– On the setup menu, use “Image Adjustment 1 J Color Balance” to adjust the
projection image color balance.
72
Appendix
This section explains how to establish a component video connection between the projector and a
video device.
z Component video output terminals come in 3-terminal sets: Y·Cb·Cr or Y·Pb·Pr. Be sure to match
the colors of the plugs on a component video cable with the colors of the terminals (Green: Y;
Blue: Cb/Pb; Red: Cr/Pr).
z Note that connection only to an analog component video output terminal is supported.
Connection to a digital output terminal is not supported.
XJ-A Series
XJ-M Series
Connecting to a Component Video Output
Projector
COMPUTER terminal
AV terminal
Bundled special AV cable
Component video cable (commercially available)
To component video
output terminals
To audio output
terminals
Video device
Yellow
(Not connected)
Red
White
Projector
AUDIO IN terminal
COMPUTER IN terminal
Stereo mini plug Ù Pin plug type audio cable
(commercially available)
Component video cable (commercially available)
To component video
output terminals
To audio output terminals
Video device
Red
White
73
Note
zNote that regardless of whether the image being projected is being input via the projector’s
S-VIDEO terminal or VIDEO terminal, the projector outputs audio that is input via the
projector’s AUDIO IN L/R terminals.
Connecting to a Composite Video Output or S-Video
Output (XJ-M Series Only)
To S-video output terminal
To video/audio output terminal
Yellow: To VIDEO terminal
To S-VIDEO terminal
Red: To AUDIO IN R terminal
White: To AUDIO IN L terminal
Projector Video device
S-video cable (commercially available)
Pin plug type video/audio cable
(commercially available)
74
The projector’s firmware (software in the projector flash ROM) can be updated and user logo images
can be transferred to the projector from a computer connected to the projector’s LOGO port (USB
port for ROM updating) with a USB cable.
To connect the projector’s LOGO port with a computer’s USB
port
Use a commercially available USB cable to connect the projector’s LOGO port to the computer’s USB
port.
Use a USB cable with a micro USB plug on one end for connection to the projector’s LOGO port, and
a plug on the other end with a shape that is compatible with the computer USB port.
Note
zFor details about how to update the firmware and how to transfer a user logo to the projector,
see the “User Logo Transfer Guide” and the “Projector Firmware Update Guide”, which are
available at the CASIO website.
Updating Firmware and Transferring a User Logo
LOGO port
XJ-A Series XJ-M Series
LOGO port
75
The projector can be hung from a ceiling. When doing so, the projector should be turned upside down,
and secured to the ceiling.
For full details, contact the retailer where you purchased the projector.
Important!
z When hanging the projector from a ceiling, make sure that it is at least one meter away from
fire detectors, fire alarms, and other fire protection devices. Locating the projector too close to
a fire protection device creates the risk of mis-operation of the device due to warm air
exhausted from the projector. Also, avoid locating the projector close to lights or fluorescent
other strong light sources. Bright light can shorten the operating range of the remote controller
or even make remote control impossible. When selecting a location for the projector, be sure
to test for proper operation of the remote controller.
z The vertical and horizontal orientation of the projected image is reversed from the normal
configuration when projecting from a projector hung from the ceiling. You need to change the
setup of the projector in order to correct for this. For details, see “Screen Settings 3 Ceiling
Mount” (page 59) under “Setup Menu Settings”.
Hanging the Projector from a Ceiling
76
z The projection distance values below are for reference when setting up the projector.
z “h” in the illustration and table indicates the distance between the center of the projector lens and
the bottom edge of the projection screen.
XJ-A Series
Projection Distance and Screen Size
Projection Size Approximate Projection Distance
XJ-A142/XJ-A147 XJ-A242/XJ-A247/XJ-A252/XJ-A257
Screen
Size
Diagonal
(cm)
Minimum
Distance
(m / feet)
Maximum
Distance
(m / feet)
h
Minimum
Distance
(m / feet)
Maximum
Distance
(m / feet)
h
(cm / inch)
40 102 1.1 / 3.61 2.2 / 7.22 0 1.0 / 3.28 1.9 / 6.23 9 / 3.54
60 152 1.7 / 5.58 3.4 / 11.15 0 1.4 / 4.59 2.8 / 9.19 14 / 5.51
80 203 2.3 / 7.55 4.5 / 14.76 0 1.9 / 6.23 3.8 / 12.47 18 / 7.09
100 254 2.8 / 9.19 5.6 / 18.37 0 2.4 / 7.87 4.8 / 15.75 23 / 9.06
150 381 4.3 / 14.11 8.5 / 27.89 0 3.6 / 11.81 7.2 / 23.62 34 / 13.39
200 508 5.7 / 18.70 11.3 / 37.07 0 4.8 / 15.75 9.6 / 31.50 45 / 17.72
h
77
XJ-M Series
The following table shows the relationship between the distance and projected image size.
Projection Size
Approximate Projection Distance
XJ-M141/XJ-M146/
XJ-M151/XJ-M156
XJ-M241/XJ-M246/
XJ-M251/XJ-M256
Screen
Size
Diagonal
(cm)
Minimum
Distance
(m / feet)
Maximum
Distance
(m / feet)
h
Minimum
Distance
(m / feet)
Maximum
Distance
(m / feet)
h
(cm / inch)
30 76 1.0 / 3.28 1.5 / 4.92 0 – – –
35 89 – – – 1.0 / 3.28 1.5 / 4.92 8 / 3.15
40 102 1.3 / 4.27 2.0 / 6.56 0 1.1 / 3.61 1.7 / 5.58 9 / 3.54
60 152 2.0 / 6.56 3.0 / 9.84 0 1.7 / 5.58 2.5 / 8.2 13 / 5.12
80 203 2.7 / 8.86 4.0 / 13.12 0 2.3 / 7.55 3.4 / 11.15 18 / 7.09
100 254 3.4 / 11.15 5.0 / 16.4 0 2.9 / 9.51 4.2 / 13.78 23 / 9.06
150 381 5.0 / 16.4 7.4 / 24.28 0 4.3 / 14.11 6.3 / 20.67 34 / 13.39
200 508 6.8 / 22.31 9.9 / 32.48 0 5.8 / 19.03 8.4 / 27.56 45 / 17.72
300 762 10.2 / 33.46 14.9 / 48.88 0 8.7 / 28.54 12.6 / 41.34 67 / 26.38
h
Specyfikacje produktu
| Marka: | Casio |
| Kategoria: | Projektor Beamer |
| Model: | XJ-A257 |
| Kolor produktu: | Grey, White |
| Typ produktu: | Projektor o standardowym rzucie |
| Źródło zasilania: | Prąd przemienny |
| Częstotliwość wejściowa AC: | 50 - 60 Hz |
| Napięcie wejściowe AC: | 100 - 240 V |
| Wysokość produktu: | 43 mm |
| Szerokość produktu: | 297 mm |
| Głębokość produktu: | 210 mm |
| Waga produktu: | 2313 g |
| W zestawie pilot zdalnego sterowania: | Tak |
| Poziom hałasu: | 35 dB |
| Wbudowane głośniki: | Tak |
| Moc wyjściowa (RMS): | 1 W |
| Obsługiwany typ USB: | Micro-USB B, USB Type-A |
| Pojemność pamięci wewnętrznej: | 2 GB |
| Umieszczenie: | Desktop, Ceiling |
| Zakres temperatur (eksploatacja): | 5 - 35 °C |
| Zakres wilgotności względnej: | 20 - 80 % |
| Współczynnik kontrastu (typowy): | 1800:1 |
| Natywne proporcje obrazu: | 16:10 |
| Wi-Fi: | Tak |
| Standardy Wi- Fi: | 802.11b, 802.11g, Wi-Fi 4 (802.11n) |
| Skrócona instrukcja obsługi: | Tak |
| Przewody: | AC, VGA |
| Pobór mocy w trybie czuwania: | 0.4 W |
| Przewodowa sieć LAN: | Nie |
| Zintegrowany czytnik kart: | Nie |
| Pobór mocy: | 165 W |
| Ilość portów HDMI: | 1 |
| Kensington Lock: | Tak |
| Typ gniazda zamka kabla: | Kensington |
| Liczba portów VGA (D-Sub): | 1 |
| Wyście mocy ac: | Tak |
| Ilość wbudowanych glosników: | 1 |
| Dopuszczalna wysokość podczas eksploatacji (n.p.m.): | 0 - 3048 m |
| Długość ogniskowa: | - mm |
| Obsługiwane rozdzielczości grafiki: | 1280 x 800 (WXGA), 1600 x 1200 (UXGA) |
| Złożone wejście wideo: | 1 |
| Obsługiwane tryby wideo: | 1080i, 1080p, 480i, 480p, 576i, 576p, 720p |
| Port DVI: | Nie |
| Zoom optyczny: | 2 x |
| Pełny HD: | Nie |
| Pilot zdalnego sterowania: | Podczerwień |
| System formatu sygnału analogowego: | NTSC, PAL, PAL 60, PAL M, PAL N, SECAM |
| Ostrość: | Automatyczna |
| Jasność projektora: | 3000 ANSI lumenów |
| Technologia projekcji: | DLP |
| Naturalna rozdzielczość projektora: | WXGA (1280x800) |
| Korekcja Keystone'a, poziom: | -30 - 30 ° |
| Odległość projekcji: | - m |
| Kompatybilność rozmiaru ekranu: | 18 - 300 " |
| Rodzaj źródła światła: | Hybrydowy laser / LED |
| Żywotność źródła światła: | 20000 h |
| Stosunek padania: | 1.15 - 2.3:1 |
| Przesunięcie: | 33 % |
| Poziom hałasu (tryp ekonomiczn): | 29 dB |
| Ilość kolorów: | 16.78 millionów kolorów |
| Rozmiar matrycy: | 0.65 " |
| Pobór mocy (tryb ekonomiczny): | 120 W |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Casio XJ-A257, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Projektor Beamer Casio
4 Lipca 2024
3 Lipca 2024
3 Lipca 2024
3 Lipca 2024
3 Lipca 2024
2 Lipca 2024
2 Lipca 2024
2 Lipca 2024
2 Lipca 2024
2 Lipca 2024
Instrukcje Projektor Beamer
- Projektor Beamer Sony
- Projektor Beamer Yamaha
- Projektor Beamer Philips
- Projektor Beamer Acer
- Projektor Beamer Epson
- Projektor Beamer Nobo
- Projektor Beamer Panasonic
- Projektor Beamer Canon
- Projektor Beamer Viewsonic
- Projektor Beamer Medion
- Projektor Beamer Toshiba
- Projektor Beamer HP
- Projektor Beamer Kodak
- Projektor Beamer JVC
- Projektor Beamer Dell
- Projektor Beamer Auna
- Projektor Beamer Mitsubishi
- Projektor Beamer XGIMI
- Projektor Beamer NEC
- Projektor Beamer Sanyo
- Projektor Beamer Optoma
- Projektor Beamer Nebula
- Projektor Beamer BenQ
- Projektor Beamer Overmax
- Projektor Beamer Fenton
- Projektor Beamer Aiptek
- Projektor Beamer Apeman
- Projektor Beamer Sagem
- Projektor Beamer Eiki
- Projektor Beamer InFocus
- Projektor Beamer Bauer
- Projektor Beamer Aaxa
- Projektor Beamer Vivitek
- Projektor Beamer Brookstone
- Projektor Beamer Stereoboomm
- Projektor Beamer Ibm
- Projektor Beamer Legamaster
- Projektor Beamer La Vague
- Projektor Beamer FengMi Wemax
- Projektor Beamer Nor-tec
- Projektor Beamer Skytronic
- Projektor Beamer Eumig
- Projektor Beamer DreamVision
Najnowsze instrukcje dla Projektor Beamer
15 Stycznia 2025
13 Stycznia 2025
13 Stycznia 2025
13 Stycznia 2025
13 Stycznia 2025
12 Stycznia 2025
17 Grudnia 2024
5 Października 2024
5 Października 2024
5 Października 2024