Instrukcja obsługi Casio G-Shock GA-710GB-1AER

Casio Oglądać G-Shock GA-710GB-1AER

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Casio G-Shock GA-710GB-1AER (7 stron) w kategorii Oglądać. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/7

Operation Guide 5522

E-9

To do this: Enter this mode: See:

x View the current time in one of 48 cities (31 time

zones) around the globe

x Swap Home Time and World Time

World Time Mode E-39

Set an alarm time Alarm Mode E-43

E-8

Mode Reference Guide

The mode you should select depends on what you want to do.

To do this: Enter this mode: See:

x View the current date in the Home City

x Configure Home City and daylight saving time (DST)

settings

x Configure time and date settings

x Direct timing start from the Timekeeping Mode

x Change the display illumination duration setting

x Enable/disable the button operation tone

Timekeeping Mode E-17

x Use the stopwatch to measure elapsed time

x Use Target Time Alarm Stopwatch Mode E-25

Use the countdown timer Countdown Timer Mode E-36

E-7

Illumination . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-47

To turn on illumination . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-47

To change the illumination duration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-48

Adjusting Hand Positions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-49

Button Operation Tone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-52

To turn the button operation tone on and off . . . . . . . . . . . . . . . . . . . . . . . . . E-52

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-54

Main Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-56

Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-58

E-6

To stop the alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-38

Checking the Current Time in a Different Time Zone . . . . . . . . . . . . . . . . . . . E-39

To enter the World Time Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-40

To view the time in another time zone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-40

To specify standard time or daylight saving time (DST) for a city . . . . . . . . . . . E-41

To swap your Home City and World Time City . . . . . . . . . . . . . . . . . . . . . . . . E-42

Using the Alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E-43

To enter the Alarm Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-43

To set an alarm time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-44

To test the alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-45

To turn an alarm and the Hourly Time Signal on and off . . . . . . . . . . . . . . . . . E-46

To stop the alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-46

E-5

Using the Stopwatch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-25

To enter the Stopwatch Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-26

To perform an elapsed time operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-28

To pause at a split time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-28

To measure two finishes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-28

To set a target time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-30

To use the target time alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-31

To stop the alert beeper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-35

To perform stopwatch timing without using the Target Time Alarm . . . . . . . . . E-35

Countdown Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-36

To enter the Countdown Timer Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-36

To configure the countdown timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-37

To perform a countdown timer operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-38

E-4

Contents

About This Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-2

Things to check before using the watch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-3

Mode Reference Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-8

Timekeeping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-17

Configuring Home City Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E-18

To configure Home City settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-18

To change the Daylight Saving Time (summer time) setting . . . . . . . . . . . . . . E-20

Adjusting the Digital Time and Date Settings . . . . . . . . . . . . . . . . . . . . . . . . .E-21

To configure the digital time and date settings . . . . . . . . . . . . . . . . . . . . . . . . E-21

E-3

Things to check before using the watch

1. Check the Home City and the daylight saving time (DST) setting.

Use the procedure under “To configure Home City settings” (page E-18) to configure

your Home City and daylight saving time settings.

Important!

x Proper World Time Mode data depends on correct Home City, time, and date

settings in the Timekeeping Mode. Make sure you configure these settings

correctly.

2. Set the current time.

x See “Adjusting the Digital Time and Date Settings” (page E-21).

The watch is now ready for use.

E-2

About This Manual

x Depending on the model of your watch, display text

appears either as dark figures on a light background, or

light figures on a dark background. All sample displays

in this manual are shown using dark figures on a light

background.

x Button operations are indicated using the letters shown

in the illustration.

x Note that the product illustrations in this manual are

intended for reference only, and so the actual product

may appear somewhat different than depicted by an

illustration.

E-1

ENGLISH

Congratulations upon your selection of this CASIO watch.

Operation Guide 5522

E-19

3. After the setting is the way you want, press to return to the Timekeeping A

Mode.

Note

x You can check the city code and name (English) of your Home City by pressing A.

x After you specify a city code, the watch will use UTC* offsets in the World Time

Mode to calculate the current time for other time zones based on the current time

in your Home City.

* Coordinated Universal Time, the world-wide scientific standard of timekeeping.

The reference point for UTC is Greenwich, England.

E-18

Configuring Home City Settings

There are two Home City settings: actually selecting the Home City, and selecting

either standard time or daylight saving time (DST).

To configure Home City settings

1. In the Timekeeping Mode, hold down until the A

flashing indicator disappears from the SET Hold

display and the currently selected city code flashes on

the display.

x This indicates the Home City setting mode.

2. Use (+) and (–) to scroll through city codes until D B

the one you want is displayed.

x For details about city codes, see the “City Code

Table” at the back of this manual.

x Holding down either button scrolls at high speed.

City Code

E-17

Timekeeping

Use the Timekeeping Mode to set and view the current time and date.

Hour

Second

Month-DayDay of week

Minute

PM indicator

Hour : Minute

Second

E-16

2. Holding down again as you press will cause the hands to return to their L C

normal positions (normal timekeeping).

Note

x Watch button functions are the same regardless of whether the hands are moved

out of the way or at their normal positions.

x Changing to another mode will cause the hands to move back to their normal

positions.

x The hands also will move back to their normal positions automatically if no

operation is performed for about one hour.

E-15

1. While holding down , press L C.

x This will cause the hour and minute hands to move to a location where they do

not block your view of the digital display.

Example: When the current time is 8:23

Flashes while the hands are moved out of the way.

E-14

General Functions (All Modes)

The functions and operations described in this section can be used in all modes.

Auto Return

If you do not perform any operation for about two or three minutes while configuring

settings (setting flashing on the digital display) in any mode, the watch will exit the

setting operation and return to normal display.

Scrolling

The and buttons are used on the setting mode to scroll through data on the B D

display. In most cases, holding down these buttons during a scroll operation scrolls

through the data at high speed.

Moving the Hands Out of the Way for Better Viewing

You can use the procedure below to temporarily move the hour and minute hands

out of the way to better view what is on the display.

x This operation can be performed in any mode. In the case of a setting mode

(setting flashing on the screen), the hands will move out of the way automatically,

even if you do not perform the below operation.

E-13

Alarm Mode Stopwatch Mode

Countdown Timer Mode World Time Mode

E-12

x Press C to cycle between the modes as shown below.

x To return to the Timekeeping Mode from any other mode, hold down C for about

two seconds.

Timekeeping Mode

Each time you press the button, the display will B

change as follows.

E-11

x In any mode (except a setting mode), press to illuminate the display.L

E-10

Selecting a Mode

x In the Timekeeping Mode, press to enter the Stopwatch Mode.D

x For more information about using the Stopwatch Mode, see “To enter the

Stopwatch Mode” (page E-26).

Timekeeping Mode Stopwatch Mode

Operation Guide 5522

E-29

Note

x Once started, elapsed time measurement continues until you press to stopD

it, even if you change to a different mode and even if the stopwatch reaches the

elapsed time maximum limit.

Using the Target Time Alarm

You can set a target time in the range of one minute to 24 hours, in units of one

minute.

A beeper will sound for 10 seconds when the elapsed timing of the stopwatch

reaches the target time.

E-28

To perform an elapsed time operation

D D D D B

Start Stop (Resume) (Stop) Reset

To pause at a split time

D B B D B

Start Split

(SPL displayed)

Split release Stop Reset

To measure two finishes

D B D B B

Start Split

(SPL displayed)

First runner finishes.

Display time of first

runner.

Stop

Second runner

finishes.

Split release

Display time of

second runner.

Reset

E-27

2. Now you can perform the same operations as those shown on page E-28.

Entering from Another Mode (including the Timekeeping Mode)

Press as many times as necessary to navigate to the Stopwatch Mode as shown C

on page E-13.

x To enter from the Timekeeping Mode using this method, press four times.C

x This will display the stopwatch screen in the same status as it was the last time you

exited the Stopwatch Mode. However, if you exited with a split time displayed, the

split time operation will be released when you return.

E-26

To enter the Stopwatch Mode

You can enter the Stopwatch Mode using any one of the methods below.

Entering Directly from the Timekeeping Mode

If the stopwatch was reset to all zeros the last time you used it, a new elapsed time

operation will start as soon as you enter the Stopwatch Mode.

See page E-28 for information about measuring an elapsed time.

1. In the Timekeeping Mode, press D.

This will result in one of the following, depending on the status of the stopwatch the

last time you exited the Stopwatch Mode.

x If reset (stopped at 0:00 00"00): Timing starts.

One-press timing start from the Timekeeping Mode (direct timing start from the

Timekeeping Mode)

x If an ongoing timing operation is paused: Timing remains paused.

x If an ongoing timing operation is in progress*: Timing continues to be performed.

* An ongoing stopwatch timing operation continues even if you navigate to

another mode from the Stopwatch Mode.

E-25

Using the Stopwatch

The stopwatch measures elapsed time, split times, and two finishes.

x The measurement range of the stopwatch is 23 hours, 59minutes, 59.99 seconds.

Elapsed time returns to zero automatically and timing continues from there when

the maximum limit is reached.

Seconds

Minutes

Hours

Minutes

1/100 Second

E-24

Note

x Resetting the seconds to 00 while the current count is in the range of 30 to

59causes the minutes to be increased by 1.

x The watch’s built-in full automatic calendar makes allowances for different month

lengths and leap years. Once you set the date, there should be no reason to

change it except after you have the watch’s battery replaced.

x The day of the week changes automatically when the date changes.

E-23

3. When the timekeeping setting you want to change is flashing, perform the

operation described below.

Screen To do this: Do this:

Toggle between 12-hour ( ) and 24-hour 12H

(24H) timekeeping Press D.

Reset the seconds to 00 Press D.

Change the hour or minute

Use (+) and (–) to D B

change these settings.

x Holding down either button

scrolls at high speed.

Change the year

Change the month or day

4. Press to exit the setting mode.A

E-22

2. Press to move the flashing in the sequence shown below to select the other C

settings.

Home City

(page E-18)

CDST

(page E-20)

12/24-Hour Format

Seconds

CHour

Illumination Duration

(page E-47) Minute

Button Operation Tone On/Off

(page E-52) C

Day

Month

Year

E-21

Adjusting the Digital Time and Date Settings

Use the procedure below to adjust the digital time and date settings.

To configure the digital time and date settings

1. In the Timekeeping Mode, hold down until the A

flashing indicator disappears from the SET Hold

display and the currently selected city code flashes

on the display.

E-20

To change the Daylight Saving Time (summer time) setting

1. In the Timekeeping Mode, hold down until the A

flashing indicator disappears from the SET Hold

display and the currently selected city code flashes on

the display.

2. Press to display the DST setting mode.C

3. Press to toggle between Daylight Saving Time (DON)

and Standard Time ( ).OFF

x Note that you cannot switch between daylight saving

time and standard time while UTC is selected as your

Home City.

4. After the setting is the way you want, press to A

return to the Timekeeping Mode.

x The indicator appears to indicate that DaylightDST

Saving Time is turned on.

DST indicator

Specyfikacje produktu

Marka:	Casio
Kategoria:	Oglądać
Model:	G-Shock GA-710GB-1AER

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Casio G-Shock GA-710GB-1AER, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Oglądać Casio

Casio G-Shock GMA-B800 Instrukcja

9 Października 2024

Casio GW-3000BD-1AER Instrukcja

9 Października 2024

Casio G-Shock GW-9500 Instrukcja

8 Października 2024

Casio Edifice ECB 950 Instrukcja

7 Października 2024

Casio G-Shock GBD-800 Instrukcja

7 Października 2024

Casio G-Shock GR-B100 Instrukcja

7 Października 2024

Casio Baby-G MSG-S500 Instrukcja

7 Października 2024

Casio Baby-G BGA-200-1E2ER Instrukcja

6 Października 2024

Casio Edifice EFA-112D-1AVEF Instrukcja

6 Października 2024

Casio G-Shock GST-B600 Instrukcja

5 Października 2024

Instrukcje Oglądać

Najnowsze instrukcje dla Oglądać

Rolex Submariner Instrukcja

9 Października 2024

Seiko 6N76 Instrukcja

8 Października 2024

Seiko 6N53 Instrukcja

8 Października 2024

Seiko 6N52 Instrukcja

8 Października 2024

Seiko 6G28 Instrukcja

8 Października 2024

Seiko 4N30 Instrukcja

8 Października 2024

Seiko 4227 Instrukcja

8 Października 2024

Seiko 6N32 Instrukcja

8 Października 2024

Seiko 6N42 Instrukcja

8 Października 2024

Seiko 6N22 Instrukcja

8 Października 2024