Instrukcja obsługi Casio G-Shock DW-5900
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Casio G-Shock DW-5900 (6 stron) w kategorii Oglądać. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/6
Operation Guide 3465
E-9
Timekeeping
Use the Timekeeping Mode to set and view the current
time and date.
Read this before you set the time and date !
The times displayed in the Timekeeping Mode and World
Time Mode are linked. Because of this, make sure you
select a city code for your Home City (the city where you
normally use the watch) before you set the time and date.
x To view the current Home City code setting, press A
while in the Timekeeping Mode.
x For full information on city codes, see the “City Code
Table” at the back of this manual.
Day of week
Seconds
Hour : Minutes
PM indicator
Day
E-8
Auto Return Features
x If you leave the watch in the Alarm Mode for two or three minutes without
performing any operation, it automatically changes to the Timekeeping Mode.
x If you leave a screen with flashing digits or a cursor on the display for two or three
minutes without performing any operation, the watch automatically saves any
settings you have made up to that point and exits the setting screen.
Scrolling
The and buttons are used in various modes and setting screens to scroll B D
through data on the display. In most cases, holding down these buttons during a
scroll operation scrolls at high speed.
Initial Screens
When you enter the World Time or Alarm Mode, the data you were viewing when
you last exited the mode appears first.
E-7
Countdown Timer Mode
C
Alarm Mode Stopwatch Mode
CC
E-6
General Guide
x Press C to change from mode to mode.
x In any mode, press B to illuminate the display.
Timekeeping Mode World Time Mode
C C
E-5E-4
Operating Precautions ..................................................................................... E-32
User Maintenance ............................................................................................ E-42
E-3
Countdown Timer............................................................................................. E-19
To use the countdown timer ......................................................................... E-19
To set the countdown start time ................................................................... E-20
Alarms ............................................................................................................... E-21
To set an alarm time ..................................................................................... E-22
To test the alarm ........................................................................................... E-23
To turn an alarm on and off .......................................................................... E-24
To turn the Hourly Time Signal on and off .................................................... E-25
Illumination .......................................................................................................E-26
To illuminate the display ............................................................................... E-27
To specify the illumination duration .............................................................. E-27
Other Settings .................................................................................................. E-28
To turn the button operation tone on and off ................................................ E-28
Specifications ................................................................................................... E-30
E-2
Contents
About This Manual ............................................................................................. E-1
General Guide ..................................................................................................... E-6
Timekeeping .......................................................................................................E-9
To set the time and date ............................................................................... E-10
To toggle the Timekeeping Mode time between DST and Standard Time .... E-13
World Time ....................................................................................................... E-14
To view the time in another city code ........................................................... E-14
To toggle a city code time
between Standard Time and Daylight Saving Time ................................... E-15
Stopwatch ......................................................................................................... E-17
To measure times with the stopwatch .......................................................... E-18
E-1
About This Manual
x Depending on the model of your watch, display text
appears either as dark figures on a light background or
light figures on a dark background. All sample displays
in this manual are shown using dark figures on a light
background.
x Button operations are indicated using the letters shown
in the illustration.
x Note that the product illustrations in this manual are
intended for reference only, and so the actual product
may appear somewhat different than depicted by an
illustration.
E
ENGLISH
Congratulations upon your selection of this CASIO watch.
To ensure that this watch provides you with the years of service for which it is
designed, carefully read and follow the instructions in this manual, especially the
information under “Operating Precautions” and “User Maintenance”.
MA1810-EA
©
2018 CASIO COMPUTER CO., LTD.
Operation Guide 3465
E-19
Countdown Timer
The countdown timer can be set within a range of
one minute to 24 hours. An alarm sounds when the
countdown reaches zero.
x The countdown operation continues even if you exit the
Countdown Timer Mode.
x All of the operations in this section are performed in the
Countdown Timer Mode, which you enter by pressing
C (page E-7).
To use the countdown timer
Press while in the Countdown Timer Mode to start the countdown timer.D
x When the end of the countdown is reached, the alarm sounds for 10 seconds or
until you stop it by pressing any button. The countdown time is automatically reset
to its starting value after the alarm stops.
Minutes
Hours Seconds
E-18
To measure times with the stopwatch
Elapsed Time
D D D D A
Start Stop Resume Stop Reset
Split Time
D A A D A
Start Split
(SPL displayed)
Split release Stop Reset
Two Finishes
D A D A A
Start Split
First runner
finishes.
Display time of
first runner.
Stop
Second runner
finishes.
Split release
Display time of
second runner.
Reset
E-17
Stopwatch
The stopwatch lets you measure elapsed time, split
times, and two finishes.
x The display range of the stopwatch is 59 minutes,
59.99seconds.
x The stopwatch continues to run, restarting from zero
after it reaches its limit, until you stop it.
x The stopwatch measurement operation continues even if
you exit the Stopwatch Mode.
x Exiting the Stopwatch Mode while a split time is frozen
on the display clears the split time and returns to
elapsed time measurement.
x All of the operations in this section are performed in the Stopwatch Mode, which
you enter by pressing (page E-7).C
Seconds
Minutes
1/100 seconds
E-16
Note
x The seconds count of the World Time is synchronized with the seconds count of
the Timekeeping Mode.
x All World Time Mode times are calculated from the current Home City time in the
Timekeeping Mode using UTC time differential values.
x The UTC differential is a value that indicates the time difference between a
reference point in Greenwich, England and the time zone where a city is located.
x The letters “UTC” is the abbreviation for “Coordinated Universal Time”, which is the
world-wide scientific standard of timekeeping. It is based upon carefully maintained
atomic (cesium) clocks that keep time accurately to within microseconds. Leap
seconds are added or subtracted as necessary to keep UTC in sync with the
Earth’s rotation.
E-15
To toggle a city code time between Standard Time and Daylight Saving Time
1. In the World Time Mode, use to display the city D
code (time zone) whose Standard Time/Daylight Saving
Time setting you want to change.
2. Hold down for about one second to toggle between A
Daylight Saving Time (DST indicator displayed) and
Standard Time (DST indicator not displayed).
x The DST indicator is on the display whenever you display
a city code for which Daylight Saving Time is turned on.
x Note that the DST/Standard Time setting affects only
the currently displayed city code. Other city codes are
not affected.
x In the World Time Mode, you can switch the city code you currently have selected
as your Timekeeping Mode Home City between Standard Time and DST. The
setting you select in the World Time Mode will also be applied in the Timekeeping
Mode.
DST indicator
E-14
World Time
World Time shows the current time in 48 cities (29 time
zones) around the world.
x All of the operations in this section are performed in
the World Time Mode, which you enter by pressing C
(page E-6).
To view the time in another city code
In the World Time Mode, press to scroll through theD
available city codes. Holding down the button scrolls at
high speed.
x For full information about city codes, see the “City Code
Table” at the back of this manual.
x If the current time shown for a city is wrong, check your
Timekeeping Mode time and Home City code settings
and make the necessary changes.
City code
Current time in the zone of
the selected city code
E-13
Daylight Saving Time (DST)
Daylight Saving Time (summer time) advances the time setting by one hour from
Standard Time. Remember that not all countries or even local areas use Daylight
Saving Time.
To toggle the Timekeeping Mode time between DST and Standard Time
1. In the Timekeeping Mode, hold down until the A
seconds start to flash, which indicates the setting
screen.
2. Press twice to display the DST setting screen.C
3. Press to toggle between Daylight Saving Time (DOn)
and Standard Time ( ).OF
4. Press to exit the setting screen.A
x The indicator is displayed on the TimekeepingDST
Mode and Alarm Mode screen while Daylight Saving
Time is turned on.
DST indicator
On/Off status
E-12
4. Press to exit the setting screen.A
x Resetting the seconds to while the current count is in the range of 30 to 59 00
causes the minutes to be increased by 1. In the range of 00 to 29, the seconds are
reset to without changing the minutes.00
x With the 12-hour format, the (PM) indicator appears to the left of the hour digitsP
for times in the range of noon to 11:59 p.m. and no indicator appears to the left of
the hour digits for times in the range of midnight to 11:59 a.m.
x With the 24-hour format, times are displayed in the range of 0:00 to 23:59, without
any indicator.
x The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is
applied in all modes.
x The year can be set in the range of 2000 to 2099.
x The watch’s built-in full automatic calendar makes allowances for different month
lengths and leap years. Once you set the date, there should be no reason to
change it except after you have the watch’s battery replaced.
x The day of the week is automatically displayed in accordance with the date (year,
month, and day) settings.
E-11
3. When the setting you want to change is flashing, use and to change it as D B
described below.
Screen To do this: Do this:
Reset the seconds to 00 Press D.
Change the city code Use (east) and (west).D B
Toggle between Daylight Saving Time (On)
and Standard Time (OF)Press D.
Change the hour or minutes Use (+) and (–).D B
Toggle between 12-hour ( ) and 24-hour 12H
(24H) timekeeping Press D.
Change the year, month, or day Use (+) and (–).D B
x See “Daylight Saving Time (DST)” (page E-13) for details about the DST setting.
E-10
To set the time and date
1. In the Timekeeping Mode, hold down until the A
seconds start to flash, which indicates the setting
screen.
2. Press to move the flashing in the sequence shown C
below to select other settings.
Seconds MinutesHourDSTCity Code
Day 12/24-Hour FormatYearMonth
C C C
CCC
C C
C
Operation Guide 3465
E-29
x Holding down to turn the button operation tone on or off also causes the C
watch’s current mode to change.
x The Mute indicator is displayed in all modes when the button operation tone is
turned off.
E-28
Other Settings
Button Operation Tone
The button operation tone sounds any time you press
one of the watch’s buttons. You can turn the button
operation tone on or off as desired.
x Even if you turn off the button operation tone, the alarm,
Hourly Time Signal, and Countdown Timer Mode alarm
all operate normally.
To turn the button operation tone on and off
In any mode (except when a setting screen is on the
display), hold down to toggle the button operation C
tone on (Mute indicator not displayed) and off (Mute
indicator displayed).
Mute indicator
E-27
To illuminate the display
In any mode, press to turn on illumination.B
x You can use the procedure below to select either 1.5 seconds or 3 seconds as the
illumination duration. When you press , the illumination will remain on for about B
1.5 seconds or 3 seconds, depending on the current illumination duration setting.
To specify the illumination duration
1.
In the Timekeeping Mode, hold down until the A
seconds start to flash, which indicates the setting
screen.
2. While the seconds are flashing, press to toggle B
the illumination duration between 1.5 seconds ( ) and
3seconds ( ).
3. Press to exit the setting screen.A
E-26
Illumination
This watch has an EL (electro-luminescent) panel that
causes the entire display to glow for easy reading in the
dark.
Illumination Precautions
x The electro-luminescent panel that provides illumination
loses power after very long use.
x Illumination may be hard to see when viewed under
direct sunlight.
x The watch may emit an audible sound whenever the
display is illuminated. This is due to vibration of the
EL panel used for illumination, and does not indicate
malfunction.
x Illumination automatically turns off whenever an alarm
sounds.
x Frequent use of illumination runs down the battery.
E-25
To turn the Hourly Time Signal on and off
1. In the Alarm Mode, use to select the Hourly Time D
Signal ( ).SIG
2. Press to toggle it on ( displayed) and off (AOn OF
displayed).
x The Hourly Time Signal on indicator is shown on the
display in all modes while the Hourly Time Signal is
turned on.
Hourly time signal
on indicator
On/Off status
E-24
To turn an alarm on and off
1. In the Alarm Mode, use to select an alarm.D
2. Press to toggle it on ( displayed) and off (AOn OF
displayed).
x Turning on an alarm ( , , , or AL-1 AL-2 AL-3 AL-4 SNZ)
displays the alarm on indicator on its Alarm Mode
screen.
x In all modes, the alarm on indicator is shown for any
alarm that is currently turned on.
x The alarm on indicator flashes while the alarm is
sounding.
x The snooze alarm indicator flashes during the 5-minute
intervals between alarms.
Snooze alarm
indicator
Alarm on indicator
On/Off status
E-23
3. Press to move the flashing between the hour and minute settings.C
4. While a setting is flashing, use (+) and (–) to change it.D B
x When setting the alarm time using the 12-hour format, take care to set the time
correctly as a.m. (indicator not displayed) or p.m. ( indicator).P
5. Press to exit the setting screen.A
Alarm Operation
The alarm sounds at the preset time for about 10 seconds, regardless of the mode
the watch is in. In the case of the snooze alarm, the alarm operation is performed a
total of seven times, every five minutes, or until you turn the alarm off (page E-24).
x To stop the alarm tone after it starts to sound, press any button.
x Performing any one of the following operations during a 5-minute interval between
snooze alarms cancels the current snooze alarm operation.
Displaying the Timekeeping Mode setting screen (page E-10)
Displaying the snooze alarm setting screen (page E-22)
To test the alarm
In the Alarm Mode, hold down to sound the alarm.D
E-22
To set an alarm time
1. In the Alarm Mode, use to scroll through the alarm D
screens until the one whose time you want to set is
displayed.
AL-1
SIG
AL-3
AL-4
AL-2
SNZ
D D D
DDD
x To set an alarm time, display the applicable alarm screen ( through AL-1 AL-4,
or ).SNZ
x The snooze alarm operation repeats every five minutes.
2. After you select an alarm, hold down until the hour setting of the alarm time A
starts to flash, which indicates the setting screen.
x This operation turns on the alarm automatically.
E-21
Alarms
The Alarm Mode gives you a choice of five daily alarms,
one of which is a snooze alarm. Also use the Alarm Mode
to turn the Hourly Time Signal (SIG) on and off.
x The snooze alarm screen is indicated by , while the SNZ
other alarm screens are numbered AL-1 through AL-4.
The Hourly Time Signal screen is indicated by SIG.
x All of the operations in this section are performed in
the Alarm Mode, which you enter by pressing (page C
E-7).
Alarm number
On/Off status
Alarm time
(Hour : Minutes)
E-20
x Press D while a countdown operation is in progress to pause it. Press again to D
resume the countdown.
x To completely stop a countdown operation, first pause it (by pressing ), and D
then press A. This returns the countdown time to its starting value.
To set the countdown start time
1.
In the Countdown Timer Mode, hold down until the A
hours of the countdown start time start to flash, which
indicates the setting screen.
2. Press to move the flashing between the hours and C
minutes.
3. While a setting is flashing, use (+) or (–) to D B
change it.
x To set the starting value of the countdown time to 24
hours, set 0:00.
4. Press to exit the setting screen.A
Specyfikacje produktu
| Marka: | Casio |
| Kategoria: | Oglądać |
| Model: | G-Shock DW-5900 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Casio G-Shock DW-5900, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Oglądać Casio
9 Października 2024
9 Października 2024
8 Października 2024
7 Października 2024
7 Października 2024
7 Października 2024
7 Października 2024
6 Października 2024
6 Października 2024
5 Października 2024
Instrukcje Oglądać
- Oglądać Braun
- Oglądać Epson
- Oglądać Geemarc
- Oglądać Boss
- Oglądać Polar
- Oglądać Marquant
- Oglądać Festina
- Oglądać Garmin
- Oglądać Citizen
- Oglądać Krontaler
- Oglądać Spin Master
- Oglądać Auriol
- Oglądać Skmei
- Oglądać Beper
- Oglądać Jaguar
- Oglądać Seiko
- Oglądać Skagen
- Oglądać La Crosse Technology
- Oglądać Velleman
- Oglądać Eta
- Oglądać Suunto
- Oglądać Michael Kors
- Oglądać Pulsar
- Oglądać Tommy Hilfiger
- Oglądać Lorus
- Oglądać Invicta
- Oglądać Adidas
- Oglądać Westfalia
- Oglądać Oregon Scientific
- Oglądać Ferrari
- Oglądać Tissot
- Oglądać Omega
- Oglądać Breitling
- Oglądać Hugo Boss
- Oglądać Technaxx
- Oglądać Eurochron
- Oglądać Timex
- Oglądać Zenith
- Oglądać ADE
- Oglądać Alpina
- Oglądać Armani
- Oglądać Ascot
- Oglądać Asics
- Oglądać Alessi
- Oglądać Lotus
- Oglądać Lars Larsen
- Oglądać Orient
- Oglądać Jacques Lemans
- Oglądać Calypso
- Oglądać Olivia Burton
- Oglądać Victorinox
- Oglądać Lambretta
- Oglądać Tudor
- Oglądać Holzkern
- Oglądać Hublot
- Oglądać Ebel
- Oglądać Christopher Ward
- Oglądać Edox
- Oglądać Gc
- Oglądać So & Co
- Oglądać Diesel
- Oglądać Karlsson
- Oglądać Bulova
- Oglądać Stuhrling
- Oglądać Easypix
- Oglądać Swatch
- Oglądać Luminox
- Oglądać Emporio Armani
- Oglądać Girard-Perregaux
- Oglądać Certina
- Oglądać TMI
- Oglądać Detomaso
- Oglądać Dugena
- Oglądać Rolex
- Oglądać TW Steel
- Oglądać Timberland
- Oglądać Spinnaker
- Oglądać Pilgrim
- Oglądać Davis
- Oglądać Habitat
- Oglądać Irox
- Oglądać ELYSEE
- Oglądać Danish Design
- Oglądać Daniel Steiger
- Oglądać Torgoen
- Oglądać WoodWatch
- Oglądać Executive
- Oglądać Nautica
- Oglądać Klaus Kobec
- Oglądać Obaku
- Oglądać Fossil
- Oglądać Shinola
- Oglądać Tikkers
- Oglądać Sinn
- Oglądać Brera
- Oglądać Cover
- Oglądać Lucien Picard
- Oglądać Nike
- Oglądać Swiza
- Oglądać Mondaine
- Oglądać Slazenger
- Oglądać Ticwatch
- Oglądać Bering
- Oglądać Leff
- Oglądać DMC
- Oglądać Lynx
- Oglądać Maurice Lacroix
- Oglądać ICE Watch
- Oglądać Dakota
- Oglądać La Crosse
- Oglądać Rado
- Oglądać Puma
- Oglądać Gant
- Oglądać Tauchmeister
- Oglądać Just
- Oglądać Sempre
- Oglądać IWC
- Oglądać Digi-tech
- Oglądać Freestyle
- Oglądać Misfit
- Oglądać Breo
- Oglądać BML
- Oglądać Inter-Quartz
- Oglądać Haffstreuner
- Oglądać Hamilton
- Oglądać Kalenji
- Oglądać Longines
- Oglądać Junghans
- Oglądać Meister Anker
- Oglądać GC Watches
- Oglądać Speedo
- Oglądać Naitica
- Oglądać TCM
- Oglądać Kogan
- Oglądać Uri Minkoff
- Oglądać Guess
- Oglądać ESQ
- Oglądać ETT
- Oglądać Triwa
- Oglądać Raketa
- Oglądać Fromanteel
- Oglądać Balmain
- Oglądać Wonky Monkey
- Oglądać Audemars Piguet
- Oglądać Timer
- Oglądać Marc Jacobs
- Oglądać Iron Annie
- Oglądać Julie Julsen
- Oglądać Xonix
- Oglądać KRAEK
- Oglądać World Timer Chronograph
- Oglądać Versace
- Oglądać PAUL HEWITT
- Oglądać Rodania
- Oglądać Bruno Sohnle
- Oglądać Naviforce
- Oglądać Movado
- Oglądać Lacoste
- Oglądać MICHELE
- Oglądać Philip Watch
- Oglądać QQ
- Oglądać Fila
- Oglądać Ronda
- Oglądać TimeStyle
- Oglądać Radley London
- Oglądać PANERAI
- Oglądać Prologue
- Oglądać Zeppelin
- Oglądać Hype
- Oglądać HYT
Najnowsze instrukcje dla Oglądać
9 Października 2024
8 Października 2024
8 Października 2024
8 Października 2024
8 Października 2024
8 Października 2024
8 Października 2024
8 Października 2024
8 Października 2024
8 Października 2024