Instrukcja obsługi Casio Exilim EX-FR100L

Casio Aparat cyfrowy Exilim EX-FR100L

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Casio Exilim EX-FR100L (157 stron) w kategorii Aparat cyfrowy. Ta instrukcja była pomocna dla 23 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/157

Digital Camera

User’s Guide

Thank you for purchasing this CASIO product.

• Before using it, be sure to read the precautions contained in this User’s Guide.

• Keep the User’s Guide in a safe place for future reference.

• For the most up-to-date information about this product, visit the official EXILIM Website

at http://www.exilim.com/

As you unpack your camera, check to make sure that all accessories shown below

are included. If anything is missing, contact your original retailer.

*The shape of the power cord plug varies according to the country or geographic

area where the camera is sold.

Accessories

Camera

(EX-FR100LCA)

Controller

(EX-FR100LCT)

Hinge Unit

• Comes pre-attached to

the camera.

Tripod nut USB-AC adaptor

(AD-C53U) Power cord*

Micro USB cable Basic Reference

• The contents of this manual are subject to change without notice.

• The contents of this manual have been checked at each step of the production

process. Feel free to contact us if you notice anything that is questionable,

erroneous, etc.

• Any copying of the contents of this User’s Guide, either in part or its entirety, is

forbidden. Except for your own personal use, any other use of the contents of this

manual without the permission of CASIO COMPUTER CO., LTD. is forbidden

under copyright laws.

• CASIO COMPUTER CO., LTD. shall not be held liable for any damages or lost

profits suffered by you or any third party due to the use or malfunction of this

product.

• CASIO COMPUTER CO., LTD. shall not be held liable for any damages, lost

profits, or claims by third parties arising out of the use of the EXILIM Connect

application software.

• CASIO COMPUTER CO., LTD. shall not be held liable for any damages or lost

profits caused by loss of memory contents due to malfunction, repair, or any other

reason.

• Note that the example screens and product illustrations shown in this User’s Guide

may differ somewhat from the screens and configuration of the actual camera.

LCD Panel

The liquid crystal panel of the monitor screen uses high-precision technology that

provides a pixel yield in ex that some very small number cess of 99.99%. This means

of pixels may not light or may remain lit at all times. This is due to the characteristics

of the liquid crystal panel, and does not indicate malfunction.

Read this first!

Charge batteries before use.

The camera and the controller each have a built-in rechargeable lithium ion

battery. The batteries are not charged when you purchase the camera, so you will

need to charge both the camera and controller before using them.

Take test shots

Before shooting your final image, shoot a test shot to ensure that the camera is

recording correctly.

4Contents

Contents

Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Read this first! . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

General Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Monitor Screen Contents and How to Change Them . . . . . . . . . . . . . . . . . . . 10

Quick Start Basics 13

What you can do with your CASIO camera . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Using the Attachment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Controller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Hinge Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Tripod nut . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Using the Touch Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

First, charge the battery prior to use.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Turning Power On and Off. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Configuring Basic Settings the First Time You Turn On the Camera. . . . . . . . 29

Preparing a Memory Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Supported Memory Cards. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

To load a memory card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

To format (initialize) a new memory card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

To Shoot a Snapshot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Selecting an Auto Recording Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

To shoot a snapshot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Viewing Snapshots . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Deleting Snapshots and Movies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Snapshot Shooting Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Recording Images 40

To configure REC mode settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Selecting a Recording Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Shooting a Burst of Images . . . . . . . . . . . . . . . . . . . . . . . (High Speed CS). . . 42

Shooting with Artistic Effects . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Art Shot). . . 43

Recording Beautiful Images of People and Scenery . . . . . . . (Make-up Art). . . 44

Recording Full-body Images with Enhanced Leg Length . . . . (Long Legs) . . 45

Shooting Scenes of an Activity at a Fixed Interval . . . . (Interval Shooting) . . 46

Shooting with Zoom. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

To record a movie . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

5Contents

Advanced Recording Settings 54

Using the REC Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

Recording Beautiful Portraits . . . . . . . . . . . . . . . . . . . . . . . . . . . .(Make-up). . . 55

Shooting by Touching the Monitor Screen . . . . . . . . . . . . (Touch Shooting). . . 55

Reducing Blur Due to Camera Movement During

Movie Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(Movie Anti Shake). . . 56

Changing the Image Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(Image Size). . . 57

Movie Image Quality Settings . . . . . . . . . . . . . . . . . . . . . . . (Movie Quality). . . 58

Correcting Image Brightness . . . . . . . . . . . . . . . . . . . . . . . . . . (Brightness). . . 58

Adjusting White Balance . . . . . . . . . . . . . . . . . . . . . . . . . . (White Balance). . . 59

Specifying ISO Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(ISO). . . 60

Selecting a Focus Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(Focus). . . 61

Self-shooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Mirror Image) . . . 62

Reducing Wind Noise during Movie Recording . . . . . . . . (Wind Noise Cut) . . . 62

Turning on Image Review . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(Review). . . 63

Viewing Snapshots and Movies 64

Viewing Snapshots . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64

Viewing a Movie. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64

Viewing the Image Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65

Zooming an On-screen Image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65

Creating a Movie of a Day’s Images . . . . . . . . . . . . . . . . (Highlight Movie) . . 66

Creating a Collage of a Day’s Snapshots . . . . . . . . . . . . (Highlight Photo) . . 68

Changing the Highlight Score of an Image . . . . . . . . . . . (Highlight Score) . . 70

Creating a Time Lapse Movie . . . . . . . . . . . . . . . . . . . . . . . . (Time Lapse) . . 71

Other Playback Functions (PLAY) 73

Using the PLAY Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73

Rotating an Image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Rotation). . . 74

Connecting the Camera with a Smartphone

(Wireless Connection) 75

Controlling Your Camera with a Smartphone . . . . . . . . . . . . . . . . . . . . . . . . . 75

Using a Wireless Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78

Getting Ready to Establish a Connection between a Smartphone and Your

Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79

Installing the EXILIM Connect App on Your Smartphone . . . . . . . . . . . . . . . . . . 79

Establishing a Wireless Connection for the First Time . . . . . . . . . . . . . . . . . . . . 80

Using a Smartphone as a Camera Remote Controller (Shoot with phone) . . 84

Sending a Snapshot or Movie File from Camera Memory

to a Smartphone . . . . . . . . . . . . . . . . . . . . . . . . . . (Send Selected Image) . . 85

Viewing Snapshots and Movies in Camera Memory

on a Smartphone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (View on phone) . . 86

6Contents

Configuring Wireless Connection Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . 87

Having Images Shot with the Camera Sent

to a Smartphone Automatically . . . . . . . . . . . . . . . . . . . . . . . . (Auto Send) . . . 87

Specifying Images to be Sent by Auto Send . . . . (Auto Send File Settings) . . . 88

Resizing Snapshots before Sending Them

to a Smartphone . . . . . . . . . . . . . . . . . . . . . . . . . . (Resize When Sending) . . . 89

Add Location Info to Snapshots . . . . . . . . . . . . . . . . . . . . . . (Location info). . . 90

Changing the Camera Password

for Wireless LAN Connection . . . . . . . . . . . . . . . . . . . . . (WLAN password). . . 91

Unpairing the Camera from a Smartphone . . . . . . . . . . . . . . . . (Unpairing). . . 92

Printing 93

Printing with a Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93

Using the Camera with a Computer 94

Things you can do using a computer... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94

Using the Camera with a Windows Computer . . . . . . . . . . . . . . . . . . . . . . . . . 94

Viewing and Storing Images on a Computer. . . . . . . . . . . . . . . . . . . . . . . . . . . . 95

Using the Camera with a Macintosh . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98

Connecting the Camera to Your Computer and Saving Files . . . . . . . . . . . . . . . 98

Files and Folders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101

Memory Card Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102

Other Settings (Set Up) 104

Adjusting Monitor Screen Brightness . . . . . . . . . . . . . . . . . . . . . .(Screen) . 104

Selecting Display Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Info) . 104

Locking the Camera or Controller Screen Orientation . . . (Rotation Lock) . 105

Configuring Camera Sound Settings . . . . . . . . . . . . . . . (Camera Sound) . 105

Using the Vibration Function . . . . . . . . . . . . . . . . . . . . . . . . . . . (Vibration) . 106

Setting the Camera’s Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Adjust) . 106

Specifying the Date Style . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Date Style) . 107

Specifying the Display Language . . . . . . . . . . . . . . . . . . . . . . (Language) . 107

Specifying the Controller Sleep State Trigger Time . . . . . . . . . . . . (Sleep) . 107

Formatting Built-in Memory or a Memory Card . . . . . . . . . . . . . . . (Format) . 108

Resetting the Camera to Factory Defaults . . . . . . . . . . . . . . . . . . .(Reset) . 108

Checking the Current Camera Firmware Version . . . . . . . . . . . . (Version) . 109

Appendix 110

Safety Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110

Shock resistant, Splashproof, Dustproof . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117

Precautions During Use. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121

Power Supply. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134

Charging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134

Battery Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135

Using the Camera in another Country . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135

7Contents

Disposing of the Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136

Using a Memory Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139

Reset Initial Default Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140

When things don’t go right... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142

Display Messages. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147

Number of Snapshots/Movie Recording Time . . . . . . . . . . . . . . . . . . . . . . . . 149

Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151

The numbers in parentheses indicate the pages where each item is explained.

General Guide

cmcnco cp

6789

21 3

bk bl bm

Camera

Wireless LAN connection

lamp (page 82)

Operation lamp

(pages 21, 24)

[p] (Power) (page 27)

Memory card slot

(page 32)

[RESET] button

(page 142)

[CARD] cover (page 32)

Speaker

Lens

Microphone (page 53)

Shutter button (page 35)

[0] (Movie) (page 51)

[FREE] lever (page 17)

[USB] port

(pages 20, 23)

[USB] cover

(pages 20, 23)

Strap holes

Controller

[USB] cover

(pages 20, 23)

[RELEASE] button

(page 16)

[RESET] button

(page 142)

[USB] port

(pages 20, 23)

Strap attachment bar

Strap holes (page 9)

[0] (Movie) (page 51)

Shutter button

(page 35)

Operation lamp

(pages 21, 24)

[p] (Power) (page 27)

Hinge unit slot

(page 16)

Camera Controller

To attach the strap to the camera

(commercially available)

Attach strap here.

The monitor screen uses various indicators, icons, and values to keep you informed

of the camera’s status.

• The sample screens in this section are intended to show you the locations of all the

indicators and figures that can appear on the monitor screen in various modes.

They do not represent screens that actually appear on the camera.

.Snapshot Recording

Monitor Screen Contents and How to Change Them

1 2 54 76 89

White Balance (page 59)

Focus mode (page 61)

Digital zoom (page 50)

Location info (page 90)

Auto Send (page 87)

Remaining movie memory capacity

(page 149)

Remaining snapshot memory

capacity (page 149)

Snapshot image size (page 57)

Long Legs icon (page 45)

Movie quality (pages 51, 58)

Touch Shooting function (page 55)

Movie Anti Shake (page 56)

ISO sensitivity (page 60)

Brightness (page 58)

Date/Time (pages 29, 106)

Camera battery level indicator

(page 26)

Controller battery level indicator

(page 26)

Communication status between

camera and controller (page 27)

PLAY mode icon (page 29)

“ ” (Show Icons) icon

Interval Shooting icon (page 46)

Wireless mode icon (page 78)

Recording mode icon (page 41)

Menu icon (page 54)

.Movie Recording

NOTE

• If you do not perform any operation for about three seconds during snapshot

recording or movie recording, icons will become transparent.

.Snapshot Viewing

Focus mode (page 61)



Movie quality (

pages 51, 58)

Movie recording time (page 52)

21 3

6543 7

brbs bq bp

Current image number/total number of

grouped images (pages 42, 46)

Group images

(High Speed CS (page 42),

Interval Shooting (page 46))

Location info (page 90)

Auto Send (page 87)

Protect indicator

Folder name-file name (page 101)

Snapshot image size (page 57)

Highlight Score (page 70)

Make-up (page 55)

White Balance (page 59)

ISO sensitivity (page 60)

Brightness (page 58)

Shutter speed



Image menu icon (p

age 65)

Camera battery level indicator

(page 26)

Controller battery level indicator

(page 26)

Date/time (pages 29, 106)

Communication status between

camera and controller (page 27)

“ ” (Show Icons) icon

REC mode icon (page 29)

Delete icon (page 38)

Wireless mode icon (pages 78, 86)

Edit icon (pages 66, 68, 70, 71)

Menu icon (page 73)

NOTE

• The folder name and file name in the upper right corner of the monitor screen has

the meaning described below (page 101).

Example: 100-0023: 23rd image file in the folder named “100CASIO”.

.Movie Playback

NOTE

• If you do not perform any operation for about three seconds during snapshot

viewing or movie playback, icons will become transparent.

Movie recording time (page 64)

Movie quality (pages 51, 58)

Highlight Score (page 70)



Image menu ico

n (page 65)

Date/time (pages 29, 106)

“ ”

Movie play ico

n (page 64)

“ ” (Show Icons) icon

1 2

13 Quick Start Basics

Quick Start Basics

Your CASIO camera is packed with a powerful selection of features and functions to

make recording of digital images easier, including the following main functions.

. Shooting

What you can do with your CASIO camera

Make-up Art

This mode is suitable for use outdoors. It enhances the

color saturation of scenery to create an artistic effect. A

make-up effect is applied to the face of the human

subject.

Long Legs

Composing the image in accordance with the on-

screen guidelines will produce an image that enhances

the length of the subject’s legs.

A variety of shooting styles

The camera connects to the controller using Bluetooth ®

wireless technology (Bluetooth).

The hinge unit and tripod nut make it possible to shoot from a

variety of different angles. The camera can also be rotated 90

degrees, which means you can change the orientation of a

snapshot with little physical repositioning of the camera.

Interval Shooting

Shoot snapshots and/or movies at fixed intervals. It’s a

great way to chronicle an activities or changes over

time.

*See page 44 for more information.

*See page 45 for more information.

*See page 16 for more information.

*See page 46 for more information.

14 Quick Start Basics

. Viewing

Art Shot

A variety of artistic effects help to make even common,

ordinary subjects become more novel and exciting.

Highlight Photo

You can configure camera settings to automatically

select snapshot highlights and generate a collage of

them.

Highlight Movie

You can configure camera settings to automatically

select snapshot and movie highlights, and create a

movie of them.

Time Lapse

Creates a movie of snapshots you shot.

*See page 43 for more information.

*See page 68 for more information.

*See page 66 for more information.

*See page 71 for more information.

15 Quick Start Basics

. Sharing

Wireless Connection

Turns your smartphone into a camera remote

controller and allows you to select one or more

snapshot and/or movie file in camera memory and

send a copy to a smartphone.

*See page 75 for more information.

16 Quick Start Basics

You can configure the camera to suit your specific needs by attaching the hinge unit,

which enables attachment of the controller, and other included and optionally

available attachments. This way you can configure the camera to suit your specific

needs.

IMPORTANT!

• Do not apply strong pressure to the surface of the monitor screen. Doing so can

damage it.

• Never touch the lens with your fingers. Finger smudges, dirt, and other foreign

matter on the lens can interfere with proper operation of the camera. Use a blower

or other means to keep the lens and flash window free of dirt and dust, and wipe

gently with a soft, dry cloth.

You can attach the controller to the camera and use the camera as a normal camera.

. To attach the controller

1. With the camera lens pointed in the

same direction as the controller’s

monitor screen, slide the hinge unit into

the controller’s hinge unit slot.

2. Push the hinge unit in until you hear it

click into place.

. To detach the controller

1. While holding down the controller’s

[RELEASE] button, pull it out of the

camera.

Using the Attachment

Controller

Hinge unit slot

Align the 2 mark on the end of

the hinge unit with the 8 mark

next to the hinge unit slot.

[RELEASE] button

17 Quick Start Basics

. To use the hinge unit as a stand

. To change the shooting direction by 90 degrees

1. While pulling down on the camera’s [FREE]

lever, rotate the camera clockwise 90 degrees

until you hear a click.

• Align the camera’s operation lamp with the C

mark on the hinge unit.

• The indentations in the lens ring indicate the

orientation of the long dimension of the image

being shot.

. To remove the hinge unit from the camera

1. While pulling down on the camera’s [FREE]

lever, rotate the camera counterclockwise

about 15 degrees until its operation lamp is

aligned with the A mark on the hinge unit.

Hinge Unit

Lens ring

[FREE] lever

Indentations

A B C

[FREE] lever

18 Quick Start Basics

2. Remove the hinge unit from the camera.

. To attach the hinge unit to the camera

1. Align the camera’s operation lamp with

the A mark on the hinge unit.

2. Rotate the camera clockwise about

15 degrees until its operation lamp is aligned

with the B mark on the hinge unit.

1. Use the tripod nut to secure a tripod

(commercially available) to the hinge unit.

Tripod nut

Tripod (commercially

available)

Tripod nut

19 Quick Start Basics

The monitor screen of the camera is a touch panel.

This means you can perform the following operations

by touching the screen with your fingers.

Touch

Momentarily touching the screen with your finger.

Touch the screen to select an icon or menu item, and

to configure settings.

Flick

Holding your finger against the screen as you flick it

up, down, left, or right.

Use flick to scroll forward through images.

Spread

Holding your thumb and forefinger against the screen

as you spread them out.

Use spread to enlarge the screen image.

Squeeze

Holding your thumb and forefinger against the screen

as you bring them together.

Use squeeze to reduce the size of the screen image,

and to display multiple images.

IMPORTANT!

• Never use a pointed or hard object to perform screen operations. Doing so can

damage the screen.

• The camera will have a hard time interpreting a screen operation made using your

fingernails. Use the fleshy pad of your finger.

Using the Touch Panel

Monitor Screen

20 Quick Start Basics

NOTE

• Applying a commercially available LCD protective sheet will reduce the operation

sensitivity of the monitor screen.

The camera and the controller each have a built-in rechargeable lithium ion battery.

The batteries are not charged when you purchase the camera, so you will need to

charge both the camera and controller before using them.

You can use either of the two following methods to charge the batteries.

• USB-AC adaptor

• USB connection to a computer (Using the included micro USB cable.)

. To charge with the USB-AC adaptor

While the camera and controller are turned off, connect in the sequence shown

below.

• When disconnecting the USB-AC adaptor from the camera or controller, be sure to

disconnect from them first.

First, charge the battery prior to use.

Charging time : Camera: Approximately 2 hours 15 minutes

Controller: Approximately 2 hours 55 minutes

USB-AC adaptor

(AD-C53U)

When plugging in the connectors, orient this marking as described below.

Camera : Towards the lens side

Controller : Towards the monitor screen side

[USB] port

Micro USB cable

(included with camera)

Power cord

[USB] cover

21 Quick Start Basics

NOTE

• If you turn on the camera or controller while charging with the USB-AC adaptor,

you will be able to perform normal recording operations. In this case, however,

charging of the camera will be stopped while it is turned on.

. Operation Lamp Indications

While power is off

While power is on

• Camera

• Controller

Operation Lamp Status Meaning

Lit red Charging

Flashing red

Charging stopped due to abnormal internal

temperature, USB-AC adaptor problem, battery

problem (page 134), timer operation.

Unlit Charging complete

Operation Lamp

Status Meaning

Lit green Camera turned

on Charging stopped

Slow red-amber

flashing

In sleep state

Charging

High speed red-green

flashing

Charging stopped due to abnormal

internal temperature, USB-AC adaptor

problem, battery problem (page 134),

timer operation.

Slow green flashing Charging complete

Operation Lamp Status Meaning

Lit red Charging

Slow red-amber flashing Charging (sleep state)

High-speed green-amber

flashing

Charging stopped due to abnormal internal

temperature, USB-AC adaptor problem, battery

problem (page 134), timer operation.

High-speed red-green flashing Same as above (sleep state)

Lit green Charging complete

Slow green flashing Charging complete (sleep state)

22 Quick Start Basics

IMPORTANT!

• A battery that has not been used for a long time and/or ambient temperature can

cause charging to take longer than normal. These conditions may also cause the

operation lamp to flash red. If this happens, refer to page 134.

• The USB-AC adaptor will become warm during charging. This is normal and does

not indicate malfunction.

• The shape of the power plug depends on each country or geographic area.

If the operation lamp is not lit or flashing during charging, check the orientation of the

USB cable connectors.

• Make sure that you insert the cable connector into the USB port until you feel it

click securely into place. Failure to insert the connector fully can result in poor

communication or malfunction.

• Note that even while the connector is fully inserted, you

still will be able to see the metal part of the connector

as shown in the illustration.

Camera

Controller

23 Quick Start Basics

. To charge using a USB connection to a computer

While the camera and controller are turned off, connect in the sequence shown below

(, ).

• If the camera or controller is on, hold down [p] (Power) for about two seconds to

turn it off before connecting to the computer.

NOTE

• If you turn on the camera while charging over a USB connection to a computer is in

progress, the camera will establish a USB connection with the computer. Charging

will continue. Charging will also continue if you turn on the controller. Note that

certain types of computers or connection environments may stop charging if supply

power is low.

Charging time : Camera: Approximately 2 hours 55 minutes

Controller: Approximately 2 hours 55 minutes

USB

Micro USB cable

(included with camera)

[USB] port

USB port

Computer

(power turned on)

When plugging in the connectors, orient this marking as described below.

Camera : Towards the lens side

Controller: Towards the monitor screen side

[USB] cover

24 Quick Start Basics

. Operation Lamp Indications

While power is off

While power is on

• Camera

• Controller

Operation Lamp Status Meaning

Lit red Charging

Flashing red

Charging stopped due to abnormal internal

temperature, USB-AC adaptor problem, battery

problem (page 134), timer operation.

Unlit Charging complete

Operation Lamp Status Meaning

Lit amber Charging

High speed red-green flashing

Charging stopped due to abnormal internal

temperature, USB-AC adaptor problem, battery

problem (page 134), timer operation.

Lit green Charging complete

Operation Lamp Status Meaning

Lit amber Charging

Slow red-amber flashing Charging (sleep state)

High-speed green-amber

flashing

Charging stopped due to abnormal internal

temperature, USB-AC adaptor problem, battery

problem (page 134), timer operation.

High-speed red-green flashing Same as above (sleep state)

Lit green Charging complete

Slow green flashing Charging complete (sleep state)

25 Quick Start Basics

IMPORTANT!

• The first time you connect the camera or controller to your computer with the USB

cable, an error message may appear on your computer. If this happens, disconnect

and then reconnect the USB cable.

• A battery that has not been used for a long time, certain types of computers, and

connection conditions can cause charging to take longer than normal. These

conditions may also cause the operation lamp to flash red. If this happens, refer to

page 142.

• For faster charging, use of the supplied USB-AC adaptor is recommended.

• Charging is not performed while the connected computer is in the hibernate mode.

Other Charging Precautions

• With the two charging methods described above, you can charge the batteries.

Never use any other type of charger device. Attempting to use a different charger

can result in unexpected accident.

• This model can be charged only via from USB 2.0 specification USB port.

• USB charging devices and power supply devices are subject to fixed standards.

Use of an inferior device or a device that is not up to standard can cause

malfunction and/or failure of your camera.

• Operation is not guaranteed in the case of a computer built or modified by you.

Even in the case of a commercially available computer, certain USB port

specifications may make it impossible to charge via the USB cable.

• A battery that is still warm immediately after normal use may not charge fully. Give

the battery time to cool before charging it.

• A battery discharges slightly while it is loaded in the camera or controller. Because

of this, it is recommended that you charge the battery immediately before you need

to use it.

• Charging the battery may cause interference with TV and radio reception. If this

happens, plug the USB-AC adaptor into an outlet that is further away from the TV

or radio.

• Actual charging time depends on current battery capacity and charging conditions.

• Do not use the USB-AC adaptor with any other device.

• Never use the power cord with another device.

• Use only the USB-AC adaptor and USB cable specified in this manual for charging.

Use of any other type of devices may result in improper charging.

26 Quick Start Basics

Checking the Current Battery Level

As battery power is consumed, a battery indicator on the monitor screen indicates its

current level as shown below.

indicates battery power is low. Charge the battery as soon as possible.

indicates that the battery is about to go dead. Charge the battery immediately.

• The level shown by the battery indicator may change when you switch between the

REC mode and PLAY mode.

• Leaving the camera for about 8 days with no power supplied while the battery is

dead will cause its date and time settings to be cleared. A message telling you to

configure time and date settings will appear the next time you turn on the camera

after restoring power. When this happens, configure date and time settings (page

106).

• See page 153 for information about battery life and number of shots.

Level High Low

Battery

Indicator

Camera ***

Controller ***

Indicator Color White White* * Red * Red

27 Quick Start Basics

. Camera-Controller Wireless Connection

The camera and controller communicate over a

Bluetooth wireless technology connection. Once

you perform the “pairing” operation required for

Bluetooth wireless technology connection, the

camera and controller will automatically connect to each other whenever you turn

them on. Note that the connection will be lost when the distance between the camera

and controller becomes too great. The controller will turn off after a preset amount of

time after the Bluetooth wireless technology connection is lost. The camera will

remain on, so you can shoot images by pressing its shutter button.

IMPORTANT!

• Your camera has Bluetooth wireless technology communication functionality built

in. Avoid operating the camera (including camera standalone operations) inside of

aircraft or anywhere else where wireless data communication is restricted.

. To turn on power

Both the camera and controller need to be turned on in order to use them.

• Turning on the camera causes the camera and controller operation lamps to light

green, and automatically starts an operation to establish a Bluetooth wireless

technology connection between the camera and controller. An image appears on

the controller and shooting is enabled.

• The connection between the camera and controller is affected by their orientation

and by the distance between them.

• The maximum range for shooting with the controller’s shutter button is around

10 meters (32.8'). The maximum range for viewing the image on the controller’s

monitor screen is around five meters (16.4').

• If the connection is poor, the controller operation lamp will flash green and

“ ” (Communication status between camera and controller) will appear on the

monitor screen. Camera response may be slow if you perform an operation on the

controller while communication conditions are bad. If this happens, try adjusting the

orientation and the distance between the camera and controller.

Turning Power On and Off

Camera

Press [p] (Power).

Controller

Press [p] (Power).

[p] (Power)

Operation lamp

[p] (Power)

Operation lamp

28 Quick Start Basics

• Note the precautions below to ensure stable

communication between the camera and

controller.

– Make sure nothing is blocking the gray areas

as shown in the illustrations.

– Point the back of the controller at the

camera.

– Make sure there are no obstacles in the path

between the camera and controller.

Sleep Mode

If you press [p] (Power) on the controller or if you do not perform any controller

operation for the time specified by the “Sleep” setting on the Setup menu (page 107)

while there is a Bluetooth wireless technology connection between the camera and

controller, the camera and controller will enter a sleep state. The operation lamp

slowly flashes green while the camera is in the sleep mode. To restore the controller

display, press any controller button. A low-power Bluetooth wireless technology

connection between the camera and controller is maintained even while they are in

the sleep mode, so operation is quickly enabled when you are ready to use the

camera and controller.

• If the distance between the camera and controller becomes to great or if

communication conditions become bad while the camera is in the sleep mode, the

connection may be dropped between them.

29 Quick Start Basics

Toggling Between the REC Mode and PLAY Mode

. To turn off power

On both the camera and the controller, hold down [p] (Power) for about two

seconds.

• Turning off the camera will cause the controller to turn off automatically.

• The camera will emit a sound when the camera is turned off. The camera turns off

when the power down process is complete.

The first time you turn on the camera, a screen appears for configuring the display

language, date, and time settings. Failure to set the date and time correctly will cause

the wrong date and time data to be recorded with images.

IMPORTANT!

• Camera models sold in certain geographic areas may not support display language

selection.

1. Turn on the camera and controller (page 27).

• If this is the first time you are turning on power, a language selection screen will

appear. If the screen does not appear, check to make sure that the camera is

turned on.

2. Flick (page 19) the controller screen upwards and downwards or touch

“ ”, “ ” until you find the language you want, and then touch to

select it.

To enter the

PLAY mode

In the REC mode, touch “ ” (PLAY).

• If “ ” (PLAY) is not displayed on

the screen, you can touching the

Review image (page 63), or switch

to the PLAY mode by touching

“ ” (Show Icons) and then

touching “ ” (PLAY).

To enter the

REC mode

In the PLAY mode, touch “ ”

(Show Icons). On the screen image

that appears, touch “ ” (REC).

Configuring Basic Settings the First Time You Turn On the

Camera

“ ”

(Show Icons)

Screen after “ ”

(Show Icons) is touched

“ ” (PLAY) / “ ” (REC)

30 Quick Start Basics

3. Touch the date display format you want.

Example: July 10, 2017

YY/MM/DD * 17/7/10

DD/MM/YY * 10/7/17

MM/DD/YY * 7/10/17

4. Set the date and the time.

• Touch the value you want to change (year,

month, day, hour, minute) and then touch “ ”,

“ ” to change it.

• To switch between 12-hour and 24-hour format,

select “am (pm)”/“24h” and then touch “ ”, “ ”

to change the setting.

5. When the date and time settings are the way

you want, touch “OK”.

NOTE

• Each country controls its local time offset and the use of summer time, and so they

are subject to change.

• While the camera is connected to a smartphone with the EXILIM Connect app, you

can execute auto date and time adjustment. The camera’s time zone will be

changed automatically in accordance with the smartphone’s time zone. For details,

see the EXILIM Connect User’s Guide (page 77).

If you make a mistake configuring display language, date, or time settings with the

above procedure, refer to the following pages for information about how to correct

the settings.

– Display language: Page 107

– Date and time: Page 106

12/24 hour switch icon

31 Quick Start Basics

Though the camera has built-in memory that can be used to store images and

movies, you probably will want to purchase a commercially available memory card for

greater capacity. The camera does not come with a memory card. Images recorded

while a memory card is loaded are saved to the memory card. When no memory card

is loaded, images are saved to built-in memory.

• Snapshots and movies stored in built-in memory cannot be copied to a memory

card.

• For information about memory capacities, see page 149.

– microSD Memory Card

– microSDHC Memory Card

– microSDXC Memory Card

• The above are supported memory card types as of January

2017.

• This camera supports use of microSD memory cards of the following types and

capacities: microSD memory cards up to 2GB; microSDHC memory cards greater

than 2GB, up to 32GB; microSDXC memory cards greater than 32GB, up to 2TB.

Note that the ability to use any particular card with this camera, even if it satisfies

the above capacity and type requirements, is not guaranteed.

. Memory Card Handling Precautions

Certain types of memory cards can slow down processing speeds. In particular, high-

quality movies may not be able to be stored correctly. A slow memory card can take

too much time to record data and result in breaks in the image and/or audio during

playback.

Preparing a Memory Card

Supported Memory Cards

Warning!

0 Memory cards are small and present a risk of accidentally being swallowed

by infants and young children. Keep memory cards out of the reach of

infants and young children. If a memory card is ever swallowed accidentally,

contact a physician immediately.

32 Quick Start Basics

1. On the camera, hold down [p]

(Power) for about two seconds to

turn off power, and then open the

[CARD] cover.

2. Load a memory card.

Positioning the memory card so its back

is facing upwards (towards the lens side

of the camera), slide it into the card slot

all the way in until you hear it click

securely into place.

3. Close the [CARD] cover.

IMPORTANT!

• Never insert anything besides a supported memory card (page 31) into the memory

card slot.

• Should water or any foreign object ever get into the card slot, immediately turn off

the camera, and contact your retailer or nearest CASIO authorized service center.

To load a memory card

Back

Front Back

33 Quick Start Basics

. To replace the memory card

Press the memory card and then release it.

This will cause it to pop out of the memory

card slot slightly. Pull the card out the rest of

the way and then insert another one.

IMPORTANT!

• Turn off the camera before replacing the

memory card. Replacing the card while

the camera is on can result in recorded

images not being saved and even damage

the memory card.

Format a memory card on the camera before using it for the first time.

IMPORTANT!

• Formatting a memory card that already has snapshots or other files on it, will delete

its contents. Normally you do not need to format a memory card again. However, if

storing to a card has slowed down or if you notice any other abnormality, re-format

the card.

• Be sure to use the camera to format a memory card. Formatting a card on a

computer will result in a non-SD standard format, which can greatly slow down

processing time and cause compatibility, performance, and other problems.

1. Load a memory card (page 32).

2. Turn on the camera and controller, and then touch “ ” (Show

Icons).

3. Touch “MENU”.

4. Touch the “¥ Setup” tab.

5. Flick upwards and downwards until you find “Format”, and then touch

it.

6. Touch “Format” and then touch “Yes”.

This starts the memory card format operation.

To format (initialize) a new memory card

34 Quick Start Basics

Your camera has a variety of different recording modes to suit various shooting

conditions and objectives (page 41). This section explains general shooting

procedures using the auto recording mode.

You can select one of two auto recording modes (Auto or Premium Auto Pro)

according to your digital imaging needs.

1. Turn on the camera and controller (page 27).

This causes the camera and controller to start up on the REC mode.

2. Touch “ ” (Show Icons).

3. Touch the second icon from the top (second

icon from the right in the case of portrait display

orientation) (Recording mode).

4. Touch “Auto” or “Premium Auto Pro” to select

the auto recording mode you want.

To Shoot a Snapshot

Selecting an Auto Recording Mode

Setting

REC Screen

Icon Display

Description

Auto This is the standard Auto recording mode.

Premium

Auto Pro

With Premium Auto Pro recording, the camera

automatically determines whether you are shooting a

subject or scenery, and other conditions. Premium

Auto Pro recording delivers higher image quality than

Auto recording.

• Some of the settings configured automatically by

Premium Auto Pro cannot be changed by you.

• It also requires more power (and runs down the

battery quicker) than Auto.

• This recording mode is recommended when you

plan to create a Highlight Photo or Highlight Movie.

Recording mode icon

35 Quick Start Basics

1. Point the camera at the subject.

If you are using Premium Auto Pro, an icon will appear

on the monitor screen describing the type of shot the

camera has detected.

• You can change display the zoom screen by holding

two fingers against the screen and spreading them

apart (page 50).

2. Press the camera or controller shutter button.

The camera will automatically adjust exposure and

focus, and then shoot the snapshot.

• Normally, shooting a snapshot will cause the

operation lamp to flash red once. Note, however,

that the operation lamp will not flash while

“Macro” is selected as the focus mode.

Shooting a Movie

Press [0] (Movie) on the camera or controller to start

movie recording.

Recording will stop if you press [0] (Movie) again.

See page 51 for details.

NOTE

• You also touch a location on the screen to focus on it,

and then shoot the image (page 55).

• You can specify the image size for snapshots. See

page 57 for more information.

• The operation lamp flashes red while movie recording is in progress.

. Shooting with the Camera Alone

You can use the camera in a stand-alone configuration without turning on the

controller or otherwise establishing a connection between it and the camera.

• If an Interval Shooting (page 46) operation or movie recording (page 51) is in

progress, it will continue to shoot images even when controller power is turned off.

To shoot a snapshot

Type of shot

+ (Telephoto) – (Wide Angle)

Shutter button

Camera

Controller

[0] (Movie)

Shutter button

Operation lamp

36 Quick Start Basics

. Shooting with Premium Auto Pro

• Some menu items are not available while Premium Auto Pro is in use (page 54).

• In addition to shutter speed and ISO sensitivity, the camera automatically executes

the following operation as required when shooting with Premium Auto Pro.

– Auto Focus is normally performed until you touch the monitor screen.

– The camera automatically determines the focus point on the screen and focuses

there.

• When shooting with Premium Auto Pro, the message “Processing Premium Auto.

Please wait...” may appear on the monitor screen. If you feel the camera is taking

too long to process data, try shooting with Auto instead.

• In some cases, Premium Auto Pro may not be able to interpret the shooting

environment correctly. If this happens, shoot with Auto.

• If “HS” is displayed, the camera will shoot a series of CS images and merge them

into a final image. Take care to avoid any camera and subject movement until

shooting of all of the CS images is complete.

37 Quick Start Basics

Use the following procedure to view snapshots on the camera’s monitor screen.

• For information about how to play back movies, see page 64.

1. Touch “ ” (PLAY) to enter the PLAY mode.

This will display one of the snapshots currently stored

in memory.

• You can also enter the PLAY mode by touching the

review image screen (page 63).

• Information about the displayed snapshot also is

included (page 11).

• You also can clear the information to view only the

snapshot (page 104).

• You can zoom the screen image by touching the monitor screen (page 65).

If you are recording a snapshot that is very important to you, it is recommended

that you zoom the image and check its details after recording it.

2. Flick left or right across the screen image to scroll through the

snapshots.

NOTE

• Pressing the controller shutter button while in the PLAY mode or while a menu

screen is displayed will switch directly to the REC mode.

• A question mark (?) will be displayed for images that cannot be displayed for some

reason.

Viewing Snapshots

“ ” (PLAY)

38 Quick Start Basics

If memory becomes full, you can delete snapshots and movies you no longer need in

order to free up storage and record more images.

IMPORTANT!

• Remember that a file (image) delete operation cannot be undone.

.To delete a single file

1. Enter the PLAY mode.

2. Touch “ ” (Show Icons).

3. Touch “ ”.

4. Touch “Delete 1 File”.

5. Flick the screen the left or right to scroll through

images until the one you want to delete is

displayed.

6. Touch “ ” (Delete).

This will delete the selected image.

.To delete all files

1. Enter the PLAY mode.

2. Touch “ ” (Show Icons).

3. Touch “ ”.

4. Touch “Delete All Files”.

5. Touch “Delete”.

This will cause the message “There are no files.” to appear.

Deleting Snapshots and Movies

39 Quick Start Basics

Operation

• If unwanted light is shining onto the lens, shade the lens with your hand when

shooting an image.

Monitor Screen when Shooting Snapshots

• Subject brightness conditions can cause monitor screen response to slow and can

cause digital noise in the monitor screen image.

• The image that appears on the monitor screen is for image composition. The actual

image will be recorded in accordance with the currently selected recording mode

(page 41).

Shooting Indoors under Fluorescent Lighting

• Minute flickering of fluorescent lighting can affect the brightness or color of an

image.

Other Precautions

• A noise reduction process is performed when ISO sensitivity is set to a high value.

This can cause the camera to take relatively longer to be ready to shoot again after

you press the shutter button. Do not perform any operation while the image

recording operation is in progress.

• Due to the characteristics of the imaging element used by the camera, very fast

moving objects in an image may appear distorted.

.Auto Focus Restrictions

• Any of the following can make proper focus impossible.

– Solid color wall or other very low contrast subject

– Strongly back lit subject

– Very shiny subject

– Blinds or other subject with a repeating horizontal pattern

– Multiple subjects at varying distances from the camera

– Subject in a dark location

– Camera movement while shooting

– Fast-moving subject

– Subjects outside the focus range of the camera

• Focus lock can be used in some recording modes. If you cannot focus properly, try

using focus lock (page 56).

Snapshot Shooting Precautions

40 Recording Images

Recording Images

Touching the monitor screen in the REC mode will display a screen for configuring

REC mode settings.

1. Press [p] (Power) to turn on the camera and enter the REC mode.

• If the camera is in the PLAY mode, touch “ ” (REC) to enter the REC mode.

2. Touch “ ” (Show Icons).

3. Touch the item whose setting you want to change.

To configure REC mode settings

Menu (page 54)*

Recording mode (page 41)

Wireless mode (page 78)

Interval Shooting mode (page 46)

PLAY mode (page 29)

*Depending on the recording mode, some of the items on the menu that

appears may not be usable.

[p] (Power)

41 Recording Images

The camera has a variety of different recording modes.

1. In the REC mode, touch the “ ” (Show

Icons).

2. Touch the recording mode icon.

3. Touch the icon of the recording mode you want

to use.

This enters the selected recording mode.

Selecting a Recording Mode

Auto Standard Auto recording mode. This is the mode normally

used for shooting (page 34).

Premium Auto

Pro

With Premium Auto Pro recording, the camera

automatically determines whether you are shooting a

subject or scenery, and other conditions. Premium Auto

Pro recording delivers higher image quality than Auto

recording mode (page 34).

Õ High Speed CS High Speed CS lets you shoot a burst of 30 images (page

42).

Art Shot

A variety of artistic effects help to make even common,

ordinary subjects become more novel and exciting (page

43).

Make-up Art

It enhances the color saturation of scenery to create an

artistic effect. A make-up effect is applied to the face of

the human subject (page 44).

Recording mode icon

42 Recording Images

Use the procedure below to shoot a burst of images.

1. In the REC mode, touch “ ” (Show Icons).

2. Touch the recording mode icon.

3. Touch “Õ” (High Speed CS).

4. Touch the scene that matches what you want to shoot.

• Touching “ ” on the screen and then touching a High Speed CS scene

displays detailed information about the scene.

• If you selected “High Speed CS 30 fps”, go to step 6.

• If you selected “High Speed CS Prerecord”, go to step 5.

5. Touch “Pre REC”.

This will start pre-recording of a group of images that will be continually updated

until you press the shutter button.

• To stop the pre-record operation of images, touch “ ”.

6. Press the shutter button.

This will shoot 30 CS images.

Shooting a Burst of Images (High Speed CS)

Scene Description

High Speed CS 30 fps High-speed shooting of 30 images in one second.

High Speed CS

Prerecord

Pressing the shutter button will store 15 pre-recorded

images along with 15 CS images that are shot after the

shutter button is pressed.

43 Recording Images

A variety of artistic effects help to make even common, ordinary subjects become

more novel and exciting.

1. In the REC mode, touch the “ ” (Show Icons).

2. Touch the recording mode icon.

3. Touch “C” (Art Shot).

4. Touch the Art Shot scene you want to use.

• Touch “ ”, “ ” to display another scene.

• Touching “ ” on the monitor screen and then touching an Art Shot scene will

display detailed information about the scene.

5. Press the shutter button to shoot.

NOTE

• The Art Shot effect will not be applied to a movie shot while an Art Shot scene is

selected.

• Sample images shown on Art Shot scene screens were not shot with this camera.

• An image shot with an Art Shot scene cannot be converted to a normal (no Art Shot

effect) image.

Shooting with Artistic Effects (Art Shot)

Scene Description

Toy Camera Dark edges and altered hues make images look like they

were shot by a toy camera.

Soft Focus Overall blurring for a soft and romantic effect.

Light Tone Weakened contrast for a feeling of airy refinement.

Sepia Sepia tones create a decidedly retro look.

Monochrome All of the strong contrast and graininess of a black and white

print.

44 Recording Images

This mode is suitable for use outdoors. It enhances the color saturation of scenery to

create an artistic effect. A make-up effect is applied to the face of the human subject.

1. In the REC mode, touch “ ” (Show Icons).

2. Touch the recording mode icon.

3. Touch “ ” (Make-up Art).

4. Touch the scene that matches what you want to shoot.

• Touching “ ” on the screen and then touching a Make-up Art scene displays

detailed information about the scene.

5. Press the shutter button to shoot.

NOTE

• When using Make-up Art, wait until the camera is able to detect a face before

shooting.

• If the camera is unable to detect a face, a strong art effect may be applied to the

face as well as to the background.

• The Make-up Art effect will not be applied to a movie shot while a Make-up Art

scene is selected.

• Sample images shown on Make-up Art scene screens were not shot with this

camera.

• An image shot with a Make-up Art scene cannot be converted to a normal (no

Make-up Art effect) image.

• Shooting with Make-up HDR can cause monitor screen response to slow down and

may cause digital noise in the monitor screen image.

Recording Beautiful Images of People and Scenery

(Make-up Art)

Scene Description

Make-up HDR

Applies a make-up effect to the face of the human

subject and uses HDR composition on the background

to create a striking work of art.

Make-up Vivid

Applies a make-up effect to the face of the human

subject and enhances the color saturation of the

background.

45 Recording Images

Composing the image in accordance with the on-screen guidelines will produce an

image that enhances the length of the subject’s legs.

1. In the REC mode, touch “ ” (Long Legs).

2. Touch the scene that matches what you want to

shoot.

• Touching “ ” on the screen and then touching the

Long Legs scene displays detailed information about

the scene.

3. Adjust the distance between the camera and

subject to align the subject’s face and legs with

the guidelines on the screen.

4. Press the shutter button to shoot.

NOTE

• Zoom is disabled while Long Legs guidelines are on the screen. If the lens is

zoomed when the Long Legs scene is selected, it will return to the normal

(unzoomed) position automatically.

• The Long Legs scene cannot be used during movie recording.

Recording Full-body Images with Enhanced Leg Length

(Long Legs)

46 Recording Images

You can use Interval Shooting to shoot snapshots and movies automatically at a

specified interval.

Scenes marked with “ ” mark (non-Standard scenes)

• With these scenes, the “Interval” setting is a rough guide only, and the actual

interval depends on decisions made by the camera about shooting conditions.

Because of this, the actual shooting interval may be slightly different from the

setting.

• A five-second interval cannot be set for these scenes.

.To start an Interval Shooting operation

1. In the REC mode, touch the “ ” (Show Icons).

2. Touch the Interval Shooting mode icon.

3. Touch the Interval Shooting scene you want to

use.

• Touching “ ” will display a detailed explanation

about each scene. Flick upwards or downwards on

the monitor screen to scroll through scenes. When

the one you want is displayed, touch its icon.

4. Touch “ ”.

Shooting Scenes of an Activity at a Fixed Interval

(Interval Shooting)

Scene

REC Screen

Icon Display

Description

Standard Shoots at a fixed interval.

Intelligent Shoots after determining the optimum setup.

Hiking Shoots using a setup optimized for hiking.

Cycling Shoots using a setup optimized for cycling.

Snow & Water Shoots using a setup optimized for snow and

water sports.

Leisure Shoots using a setup optimized for leisure and

trips.

Interval Shooting

mode icon

47 Recording Images

5. Touch an item and then change its setting.

6. Touch “ ” (Back).

7. Touch “Start”.

This starts the operation.

• Starting Interval Shooting operation causes the camera and controller to enter

a sleep state and standby for recording of the images. This will be indicated by

the camera’s operation lamp flashing green. Note that the camera will not enter

the sleep state if “5 sec” is selected for the “Interval” setting.

• To recover from the sleep state, press any

controller button. Next, touching “ ” on the

monitor screen will display the number of recorded

images. The maximum number of shots is 9,999.

Interval Allows selection of one of the shooting intervals below.

5 sec, 15 sec, 30 sec, 1 min, 2 min

Shooting Style

t³:

Shoots five snapshots followed by a five-second movie.

³ Only:

Shoots a five-second movie. Audio is also recorded with

this setting.

t Only: Shoots a snapshot.

• When “5 sec” is selected for the “Interval” setting, the

movie recording time is two seconds.

48 Recording Images

NOTE

• Anti-shake is applied in accordance with the current camera settings. However,

image anti-shake is not applied.

• The current shooting setup, including zoom, cannot be changed while shooting

with this function.

• If the camera battery goes dead during an Interval Shooting operation, the

operation will terminate. The controller battery going dead does not affect an

ongoing operation. To stop the Interval Shooting operation in this case, hold down

[p] (Power) on the camera for about two seconds.

• If you are performing manual camera operations or if the camera is out of the sleep

state when the Interval Shooting operation reaches a shooting interval, Interval

Shooting recording for that interval will be skipped.

• Pressing the controller’s [p] (Power) button while the camera is out of the sleep

state will return to the sleep state and restart the Interval Snapshot operation.

• Initial default settings depend on the selected scene.

• If you change any settings, they are retained when you turn the camera off. To

restore initial default settings, perform a reset operation (page 108) to reset the

camera.

• Certain environments may cause the shooting interval to be longer than normal.

49 Recording Images

.To stop an Interval Shooting operation

1. On the controller, press any button to recover from the sleep state.

2. Touch “ ” icon.

3. Touch “Yes”.

This stops the Interval Shooting operation.

.To shoot images manually during an Interval Shooting operation

You can shoot snapshots and movies manually even while an Interval Shooting

operation is in progress.

1. On the controller, press any button to recover from the sleep state.

2. Perform the required controller or camera operation to shoot the image

you want.

NOTE

• You can also press the camera’s shutter button or [0] (Movie) button to shoot while

the camera is in the sleep state.

• After an Interval Shooting operation is complete, the recording mode will return to

Premium Auto Pro.

• The Review image is displayed only when “Type 1” is selected as the Review

image type (page 63).

50 Recording Images

Your camera is equipped with digital zoom, that lets you zoom an image up to 4X.

Note that a digital process is used to enlarge the center of the image, so there is

deterioration of image quality.

1. Perform the required screen operation to change the zoom factor as

desired.

Zoom in: Touch “+”, or spread

Zoom out: Touch “–”, or squeeze

2. Press the shutter button to shoot the image.

NOTE

• Telephoto images are prone to blurring caused by camera movement when you

press the shutter button. Because of this, stabilizing the camera by placing it on a

level surface, etc. is recommended.

• Zoom operations are disabled while shooting with Interval Shooting.

• Zoom operations are disabled during movie recording. Perform the zoom operation

before you start recording.

• “Ù” is displayed on the monitor screen while digital zoom is being used.

Shooting with Zoom

Telephoto : Enlarges the subject and narrows the range.

Wide Angle : Reduces the size of the subject and broadens the range.

Telephoto Wide Angle

51 Recording Images

The following procedure explains how to record a movie.

1. In the REC mode, touch “ ” (Show Icons).

2. Touch “MENU”.

3. Touch “ ”, “ ” until you find “Movie Quality”, and then touch to

select it.

4. Touch the item whose setting you want to change.

5. To close the menu screen, touch “ ” or press the shutter button.

To record a movie

Movie

Quality

REC Screen

Icon Display

Frame

Rate

Image Size

(Pixels) Description

FHD(30p)

30fps 1920x1080

Select this setting to record full

high-definition (FHD) movies.

The aspect ratio of movies

recorded with this setting is

16:9.

STD 30fps 640x480

Use this setting for standard

movie recording. Shooting is

performed using an aspect

ratio of 4:3.

HS240 240fps 512x384

Select this setting to record

high speed movies at a speed

of 240 fps.

• Audio is not recorded.

52 Recording Images

6. Press [0] (Movie).

This will start recording.

• Monaural audio is also recorded during movie

recording while “FHD(30p)” or “STD” is selected

for the movie quality setting.

• When “FHD(30p)” or “STD” is selected for the

movie quality setting, you can touch a point on the

controller screen while movie recording is in

progress to focus on that point. Note, however,

that touching the screen will not perform a focus

operation if the Touch Shooting setting (page 55)

is “Off”.

7. Press [0] (Movie) to stop recording.

• Each movie can be up to 29 minutes or 4 GB long. Movie recording also will

stop automatically if memory becomes full before you stop movie recording.

Recording Movies with Premium Auto Pro

When Premium Auto Pro is enabled (page 34), the camera automatically make

judgments about the subject, shooting conditions, and other parameters. The result is

higher quality images than those produced by Auto recording.

• Premium Auto Pro is enabled for FHD(30p) movies and STD movies only.

• Using Premium Auto Pro uses up the battery charge more quickly than using Auto

recording.

Minimizing the Effects of Camera Movement during Movie Recording

While the image quality setting is “FHD(30p)” or “STD”, you can reduce blur due to

camera movement during movie recording by selecting the “Standard” or “Strong”

setting for “Movie Anti Shake” (page 56). Note, however, that image stabilization does

not prevent image blur due to subject movement during movie recording. Also, image

stabilization results in a narrower angle of view during movie recording. Though

selecting “Strong” for the Movie Anti Shake setting will increase the anti shake effect,

it can also increase the chance horizontal banding in the image due to light source

flicker (caused by fluorescent lighting).

High Speed Movie Recording Precautions

• When shooting a high speed movie, shoot in a well-lit environment.

• When recording a high speed movie, light source flicker can cause horizontal

bands to appear in the image. This does not indicate malfunction of the camera.

Recording time

53 Recording Images

Movie Recording Focus Position

When the focus mode setting is “AF” or “PF”, recording is performed using pan focus,

which provides a deep depth of field and suppresses image blurring. When the focus

mode setting is “Macro”, the image is automatically focused and fixed before

recording starts.

Also, you can touch a location on the monitor screen during movie recording to focus

at that location. Note, however, that touching the screen will not perform a focus

operation in the following cases.

• “Off” selected for the Touch Shooting setting

• “PF” selected for the focus setting

• “HS240” is selected for the movie quality setting

IMPORTANT!

• Spending a long time using movie recording will cause the camera to become

slightly warm to the touch. This is normal and does not indicate malfunction.

• The camera also records audio along with FHD(30p) and

STD movies. Note the following points when shooting a

movie.

– Take care that the microphone is not blocked by your

fingers, etc.

– Good audio recording results are not possible when the

camera is too far away from what you are trying to

record.

• Shooting movies for long periods in areas where temperature is relatively high can

cause digital noise (dots of light) to appear in the movie image. A rise in the

camera’s internal temperature also may force movie recording to stop

automatically. If this happens, stop recording and allow the camera to cool down,

which should cause normal operation to resume.

• Use of the camera’s built-in memory or certain types of memory cards can slow

down processing speeds. In particular, high-quality movies may not be able to be

stored correctly. A slow memory card can take too much time to record data and

result in breaks in the image and/or audio during playback.

NOTE

• Zoom operations are disabled during movie recording. To use zoom, perform the

zoom operation before you press [0] (Movie) to start recording.

• You can focus at a particular point before starting movie recording. On the

controller screen, touch the location where you want to focus, and then start

recording.

• The Make-up function cannot be used during movie recording.

Microphone

54 Advanced Recording Settings

Advanced Recording Settings

The following are menu operations you can use to configure various camera settings.

.Example Menu Screen Operation

1. In the REC mode, touch “ ” (Show

Icons).

2. Touch “MENU”.

This will display the menu screen.

• Menu contents are different in the REC mode and

PLAY mode.

3. Touch the tab where the menu item you want

to configure is located.

4. Flick upwards and downwards until you find the item whose setting

you want to change.

• To cancel and exit the menu, touch “ ” or press the controller’s shutter button.

5. Touch the item.

6. Configure the setting of the item in accordance with the screen

contents.

• To navigate back to the previous menu level, touch “ ”.

NOTE

• Depending on the recording mode, some of the items on the menu that appears

may not be usable. Nothing will happen if you touch an unusable item.

.Menu Operations in This Manual

Menu operations are represented in this manual as shown below. Touch the indicated

icons and items, and perform operations as they are indicated, from left to right.

Using the REC Menu

Tabs

Items

Procedure

Enter the REC Mode * MENU * “rREC MENU” Tab *

Touch Shooting

55 Advanced Recording Settings

Procedure

Enter the REC mode * MENU * “rREC MENU” Tab * Make-up

Make-up enables adjustment of human skin tone hues and texture, and softening of

facial shadows caused by harsh sunlight for better looking portraits.

NOTE

• Make-up is disabled while shooting with the following feature.

High Speed CS, Art Shot

Procedure

Enter the REC mode * MENU * “rREC MENU” Tab *

Touch Shooting

When you touch a location on the screen, the camera focuses on that location and

shoots.

NOTE

• When using Touch Shooting to focus, select “AF” or “Macro” as the focus mode

(page 61).

• If the focus frame remains red while the “AF Only” setting is selected, it means that

the image is not in focus (because the subject is too close, etc.) If this happens,

point the camera at the subject and try focusing again.

• Touch Shooting cannot be used while the camera is configured with either of the

settings below.

– Recording Mode: High Speed CS Prerecord

Recording Beautiful Portraits (Make-up)

Skin Tone “Tan +6” to “0 (Off)” to “Light +6”

Smooth Skin “0 (Off)” to “+12 (Max.)”

Shooting by Touching the Monitor Screen (Touch Shooting)

AF + Shoot The camera performs Auto Focus at the spot you touch and

then shoots.

AF Only The camera performs Auto Focus at the spot you touch and

locks focus (Focus Lock).

Off Touch Shooting disabled.

56 Advanced Recording Settings

Using Focus Lock

Use “focus lock” when you want to focus on a particular

person or object. To use focus lock, configure the

camera settings below.

Touch Shooting: AF Only

Focus Mode: AF or Macro

1. Touch the subject you want to focus on.

2. When you are ready to shoot the image,

press the shutter button.

NOTE

• Focus lock also locks exposure (AE) and white balance.

• Focus lock is cancelled if you touch the screen, or about five minutes after focus

lock is activated.

Procedure

Enter the REC mode * MENU * “rREC MENU” Tab *

Movie Anti Shake

You can reduce blur due to camera movement during movie recording by selecting

the (Standard) or (Strong) setting. However, image anti-shake is not used.

Also, Anti Shake results in a narrower angle of view during movie recording.

NOTE

• Movie Anti Shake is not supported during High Speed Movie recording.

Reducing Blur Due to Camera Movement During Movie

Recording (Movie Anti Shake)

Focus frame

Subject to be focused on

57 Advanced Recording Settings

Procedure

Enter the REC Mode * MENU * “rREC MENU” Tab * Image Size

This setting can be used to configure snapshot image size.

• The initial factory default image size setting is 12M (12 million pixels).

• You should regard the print paper sizes suggested here as guidelines only (200 dpi

print resolution).

.Pixels and image size

A digital camera image is a collection of small

dots called “pixels”. The more pixels there are

in an image, the more detail there will be.

However, you generally can do with fewer

pixels when printing an image (L size)

through a print service, attaching an image to

e-mail, when viewing the image on a

computer, etc.

The size of an image indicates how many

pixels it contains, and is expressed as horizontal pixels

xvertical pixels.

• Note that larger images have more pixels, so they take up more memory space.

• For information about image size and number of images that can be stored, see

page 149.

• For information about movie image size, see page 149.

Changing the Image Size (Image Size)

Image Size

(Pixels)

REC Screen

Icon Display

Suggested Print

Size and

Application

Description

12M

(4000x3000) Poster Print

Good detail for better clarity even

for images cropped from the

original on a computer, etc.

(2560x1920) A4 Print Good detail

Pixel

58 Advanced Recording Settings

Procedure

Enter the REC Mode * MENU * “rREC MENU” Tab * Movie Quality

This setting can be used to configure movie image quality settings and to select either

normal movie recording or High Speed Movie recording. For information about movie

image quality settings, see page 51.

Procedure

Enter the REC Mode * MENU * “rREC MENU” Tab * Brightness

You can manually adjust an image’s exposure value (EV value) before shooting it.

The exposure compensation value you set remains in effect until you change it.

– Exposure Compensation Range: –2.0 EV to +2.0 EV

– Unit: 1/3 EV

• To cancel exposure compensation, change the EV value to 0.0.

NOTE

• When shooting under very dark or very bright conditions, you may not be able to

obtain satisfactory results even after performing exposure compensation.

Movie Image Quality Settings (Movie Quality)

Correcting Image Brightness (Brightness)

Decreases the EV value. A lower EV

value is best for dark-color subjects and

for shooting outdoors on a clear day.

Increases the EV value. A higher EV

value is best for light-colored subjects

and backlit subjects.

59 Advanced Recording Settings

Procedure

Enter the REC Mode * MENU * “rREC MENU” Tab *

White Balance

You can adjust white balance to match the source of light available where you are

shooting and avoid the blue cast that results when shooting outdoors when it is

cloudy, and the green cast that results when shooting under fluorescent lighting.

1. Touch the type of white balance you want to select.

You can see the affect of the white balance setting you select on the monitor

screen.

• When “‡Auto WB” is selected for the white balance setting, the camera

automatically determines the white point of the subject. Certain subject colors

and light source conditions can cause problems when the camera tries to

determine the white point, which makes proper white balance adjustment

impossible. If this happens, select the white balance setting that matches your

shooting conditions (Daylight, Overcast, etc.).

• When shooting with Premium Auto Pro, the white balance setting is fixed at

“‡Auto WB”.

Adjusting White Balance (White Balance)

Setting Description

Auto WB Configures the camera to adjust white balance

automatically

Daylight For shooting outdoors on a clear day

Overcast For shooting outdoors on an overcast rainy day, in the

shade, etc.

Shade For shooting on a clear day in the shade of trees or

buildings

Day White Fl. For shooting under white or day white fluorescent

lighting

Daylight Fluor For shooting under daylight fluorescent lighting

Tungsten For shooting under light bulb lighting

Manual WB

For configuring the camera manually to suit a particular

light source.

Touch “·Manual WB”.

In the location where you plan to

shoot, point the camera at a

blank white piece of paper so it

fills the entire monitor screen.

Touch an area of the screen

where no icon is located.

The white balance setting is retained even if you turn

off the camera.

‡

“

†

–

Blank white paper

60 Advanced Recording Settings

Procedure

Enter the REC Mode * MENU * “ rREC MENU” Tab * ISO

ISO sensitivity is a measure of sensitivity to light.

• Since higher ISO sensitivity values tend to result in digital noise in images, the

camera performs a noise filtering process. Because of this, it may take relatively

longer for the camera to finish recording an image after it is shot. You will not be

able to perform any operation while image recording is in progress.

• When shooting with Premium Auto Pro, the ISO setting is fixed at “Auto”.

Specifying ISO Sensitivity (ISO)

Setting Description

Auto Adjusts sensitivity automatically according to conditions

ISO64 Lower

sensitivity

Higher

sensitivity

Slow shutter speed

Fast shutter speed (Set

for shooting in dimly lit

areas.)

Less noise

Some coarseness

(increased digital noise)

ISO100

ISO200

ISO400

ISO800

ISO1600

ISO3200

61 Advanced Recording Settings

Procedure

Enter the REC Mode * MENU * “ rREC MENU” Tab * Focus

Changing to a different focus mode can help to achieve better focus.

*1 The focus range is the distance from the lens surface.

*2 Focus remains fixed at the position where it was when movie recording started.

*3 Some time may be required to focus.

NOTE

• The focus mode is fixed as “AF” (Auto Focus) while shooting with Premium Auto

Pro.

Selecting a Focus Mode (Focus)

Settings

REC Screen

Icon Display

Type of Shot Focus Mode Approximate Focus Range

Snapshot SnapshotMovies Movies

(Auto

Focus)

None

General

recording

Automatic

Fixed

focal point

10 cm to

(infinity)

(3.9"

)

46 cm to

(infinity)

(18.1"

)

Macro

Close ups Automatic 3 cm to 10 cm

(1.2" to 3.9")

3 cm to 10 cm

(1.2" to 3.9")

2, 3

PF (Pan

Focus)

Shooting

with a

relatively

wide focus

range

Fixed

focal point

Fixed

focal point

55 cm to

(infinity)

(21.7"

)

46 cm to

(infinity)

(18.1"

)

62 Advanced Recording Settings

Procedure

Enter the REC Mode * MENU * “ rREC MENU” Tab * Mirror Image

Turning on this function displays the controller monitor image as a mirror image. This

comes in handy when using the controller to compose self-shot images. The image is

recorded in normal orientation (not mirror imaged).

NOTE

• You can change an image displayed on the screen to a mirror image by flicking the

image.

Procedure

Enter the REC Mode * MENU * “ rREC MENU” Tab *

Wind Noise Cut

Select “On” to reduce wind noise during movie recording. Note, however, that this will

also cause the sound quality to change.

Self-shooting (Mirror Image)

Reducing Wind Noise during Movie Recording

(Wind Noise Cut)

Normal image Mirrored image

63 Advanced Recording Settings

Procedure

Enter the REC Mode * MENU * “ rREC MENU” Tab * Review

While Review is turned on, the camera will display an image immediately after it is

recorded.

NOTE

• A Type 2 review image is displayed when “High Speed CS” is selected as the

recording mode, even if “Type 1” is selected for the Review setting.

Turning on Image Review (Review)

Type 1 Displays a full-screen view of the image for about one second.

Type 2

Displays a review image in the lower left corner (when the controller is

in landscape orientation) or the upper left corner (in portrait orientation)

of the controller monitor screen. Touching the Review image will enter

the PLAY mode and display a full-screen view of the image.

Off Turns off review image display

65 Viewing Snapshots and Movies

The image menu shows multiple images on a single screen.

1. In the PLAY mode, touch “ ” or squeeze your

fingers on the screen.

This displays the image menu.

• Touch “ ”, “ ”, or flick upwards or downwards

to scroll to the next page of images.

• To view the normal (single image) display mode,

touch the image your want to view.

• In the case of a movie, the first image in the movie

is displayed.

• CS images and images shot with Interval Shooting are displayed as grouped

images.

• A question mark (?) will be displayed for images that cannot be displayed for

some reason.

Snapshots can be zoomed on the monitor screen up to 4X.

1. In the PLAY mode, flick left or right to display the image you want to

view.

2. Touch the center of the screen or spread your thumb and forefinger

(page 19) on the displayed image to enlarge it.

• Dragging an enlarged screen image will change the part of the image that is

displayed.

• Touching “ ” or squeezing your thumb and forefinger (page 19) on the

displayed image will reduce it in size.

Viewing the Image Menu

Zooming an On-screen Image

66 Viewing Snapshots and Movies

You can configure camera settings to automatically select snapshot and movie

highlights, and create a movie of them. Images included in a Highlight Movie are

selected based on their highlight scores and shooting condition information recorded

along with the images.

• You can use the Highlight Score function (page 70) to change the highlight score of

a snapshot.

• The playback time and effects applied to the Highlight Movie are automatically

determined based on the shooting condition information recorded along with the

images included in the movie and their highlight score.

1. In the PLAY mode, touch “ ” (Show Icons).

2. Touch the “ ” (Edit) icon.

3. Touch “ ” (Highlight Movie) icon.

• Touching “ ” will display a detailed explanation about image editing functions.

Flick upwards or downwards on the monitor screen until “Highlight Movie” is

displayed, and then touch its icon.

4. Select how images should be chosen for conversion to a Highlight

Movie.

5. Touch “¥”.

6. Touch an item and then change its setting.

7. After settings are the way you want, touch “ ” (Back) to return to the

screen in step 5.

8. Touch “ ” or “ ” to select the date or Interval Shooting for which

you want to create a Highlight Movie, and then touch it.

Creating a Movie of a Day’s Images (Highlight Movie)

Date Images are selected from among those shot on a specific

date.

Interval Group Images are selected from among those in a group of

Interval Shooting images (page 46).

Max Play Time Specify the playback time of the Highlight Movie.

Music Select the background music you want to use.

67 Viewing Snapshots and Movies

9. Touch “Yes”.

This creates and save the Highlight Movie, and displays it on the monitor screen.

• Touching “Cancel” while creation of a Highlight Movie is in progress will stop

Highlight Movie creation. No movie is saved if you stop Highlight Movie

creation.

NOTE

• An image whose highlight score is “0” is never included in a Highlight Movie.

• A Highlight Movie is FHD(30p) movie quality, with an aspect ratio of 16:9. If an

image with an aspect ratio that is not 16:9 is incorporated into a Highlight Move, the

top and bottom of the image will be cropped as required.

• If a portrait orientation image is incorporated in to a Highlight Movie, there will be

black bands on the left and right of the image.

• When there is a total of more than 9,999 snapshot and movie files shot on the

same date, Highlight Movie will select photos and movies from the files numbered

1 to 9999.

• Depending on the number of files and other factors when a Highlight Movie is being

created, the creation operation may take some time.

• Only FHD(30p) quality movies that have been recorded with this camera, with a

CASIO EX-FR100, or with a CASIO EX-FR10 camera can be used in a Highlight

Movie. Even if a movie was recorded with this camera, it cannot be used in a

Highlight Movie if it is HS240 or STD quality.

68 Viewing Snapshots and Movies

You can configure camera settings to automatically select

snapshot highlights and generate a collage of them. The

snapshots included in a Highlight Photo are selected

automatically based on their high light scores and shooting

condition information recorded along with the snapshots.

• You can use the Highlight Score function (page 70) to

change the highlight score of a snapshot.

1. In the PLAY mode, touch “ ” (Show Icons).

2. Touch the “ ” (Edit) icon.

3. Touch “ ”.

• Touching “ ” will display a detailed explanation about image editing functions.

Flick upwards or downwards on the monitor screen until “Highlight Photo” is

displayed, and then touch its icon.

4. Select how images should be chosen for conversion to a Highlight

Photo.

5. Touch “ ”, “ ” to select the date or Interval Shooting for which you

want to create a Highlight Photo.

6. Touch “ ”, “ ” to display the layout you want to use, and then

touch it.

7. Touch “Apply”.

This displays the Highlight Photo and saves it in camera memory.

• Touching “Cancel” while creation of a Highlight Photo is in progress will stop

Highlight Photo creation.

• The screen that appears after the image is saved includes a “ ” (Shuffle)

icon. Touching the shuffle icon creates a Highlight Photo using different

snapshots. This also deleted the previously created Highlight Photo.

8. Touch “ ” to exit Highlight Photo.

Creating a Collage of a Day’s Snapshots (Highlight Photo)

Date Images are selected from among those shot on a specific

date.

Interval Group Images are selected from among those in a group of

Interval Shooting images (page 46).

69 Viewing Snapshots and Movies

NOTE

• An image whose highlight score is “0” is never included in a Highlight Photo.

• When there are more than 9,999 snapshots shot on the same date stored on the

memory card, Highlight Photo will select photos from those numbered 1 to 9999.

• The Highlight Photo operation may not be possible while battery power is low.

70 Viewing Snapshots and Movies

You can use the procedure below to change the highlight score of a snapshot or

movie.

1. In the PLAY mode, touch “ ” (Show Icons).

2. Touch the “ ” (Edit) icon.

3. Touch the “ ” (Highlight Score) icon.

4. Flick the screen upwards or downwards to

scroll through highlight scores until the one

you want to delete is displayed, and then

touch to select it.

5. Touch the score you want to assign to the selected image.

• You can flick the screen left or right to scroll to another image and change its

score as well.

6. After changing the highlight score of the image, touch “ ” to return

to the main screen.

NOTE

• The highlight score function can be used only with snapshots and movies recorded

with this camera.

• The highlight score of a protected image cannot be changed.

Changing the Highlight Score of an Image (Highlight Score)

Highlight

Score Description

No score assigned (default)

An image with this score may be selected for a Highlight Snapshot or

Highlight Movie.

An image with this score is given priority for Highlight Snapshot or

Highlight Movie selection.

An image with this score is never selected for a Highlight Snapshot or

Highlight Movie.

71 Viewing Snapshots and Movies

This function creates a Time Lapse Movie up to 10 minutes long by combining

snapshots shot with the camera on a particular date, in the order they were shot.

1. In the PLAY mode, touch “ ” (Show Icons).

2. Touch the “ ” (Edit) icon.

3. Touch the “ ” (Time Lapse) icon.

• Touching “ ” will display a detailed explanation about image editing functions.

Flick upwards or downwards on the monitor screen until “Time Lapse” is

displayed, and then touch its icon.

4. Select how images should be chosen for conversion to a Time Lapse

Movie.

5. Touch “¥”.

6. Touch an item and then change its setting.

7. After settings are the way you want, touch “ ” (Back) to return to the

screen in step 5.

8. Use (touch) the up and down arrows (“ ”, “ ”) to display the

recording date or Interval Shooting of the images you want to use to

create a Time Lapse Movie.

9. Touch “Yes”.

This creates and displays the Time Lapse Movie.

• Touching “Cancel” while creation of a Time Lapse Movie is in progress will

cancel the creation process.

Creating a Time Lapse Movie (Time Lapse)

Date Create a Time Lapse Movie for a specific date.

Interval Group Create a Time Lapse Movie for group of Interval Shooting

images (page 46).

Playback Speed

Specify the playback time of each image. Selecting “Slow”

specifies a longer playback time for each image, while

“Fast” specifies a shorter playback time.

Music Select the background music you want to use.

73 Other Playback Functions (PLAY)

Other Playback Functions (PLAY)

The following are menu operations you can use to configure various camera settings.

. Example Menu Screen Operation

1. In the PLAY mode, touch “ ” (Show

Icons).

2. Touch “MENU”.

This will display the menu screen.

• Menu contents are different in the REC mode and

PLAY mode.

3. Touch the tab where the menu item you want

to configure is located.

4. Touch the item whose setting you want to change.

5. Configure the setting of the item in accordance with the screen

contents.

• To navigate back to the previous menu level, touch “ ”.

. Menu Operations in This Manual

Menu operations are represented in this manual as shown below. Touch the indicated

icons and items, and perform operations as they are indicated, from left to right.

Using the PLAY Menu

Tabs

Items

Procedure

Enter the PLAY Mode * MENU * Rotation

74 Other Playback Functions (PLAY)

Procedure

Enter the PLAY Mode * MENU * Rotation

1. Flick left or right to display the image you want to rotate.

2. Touch “ ”.

This will rotate the image 90 degrees to the left.

3. When the image is in the orientation you want, touch “ ”.

NOTE

• Note that this procedure does not actually change the image data. It simply alters

how the image is displayed on the camera’s monitor screen.

Rotating an Image (Rotation)

75 Connecting the Camera with a Smartphone

(Wireless Connection)

Connecting the Camera with a Smartphone

(Wireless Connection)

Your camera has both Bluetooth wireless technology and wireless LAN capabilities

built in. After establishing a wireless connection with a smartphone, you can perform

the operations described in the table below. Requires installation of the EXILIM

Connect app on your smartphone.

• Your camera can connect using

Bluetooth wireless technology with a

smartphone that supports Bluetooth low

energy technology. Note that the

Bluetooth wireless technology that

connects your camera with a

smartphone is different from the

Bluetooth wireless technology that

connects the camera with the controller.

Controlling Your Camera with a Smartphone

With this function: You can do this:

Auto Send

Images can be automatically sent to a

smartphone that has been Bluetooth wireless

technology paired with the camera (page 87).

Shoot with phone

Remotely control and shoot with the camera

using a smartphone (page 84).

Send to phone

Send snapshots and movies recorded with your

camera to your smartphone.

After sending an

image to a smartphone, you can then upload it

from the smartphone to a social networking

service (page 85).

76 Connecting the Camera with a Smartphone

(Wireless Connection)

IMPORTANT!

• Inside an aircraft or anywhere else where use of wireless communication is

restricted or prohibited, do not use this camera.

• Some smartphone models may not be able to play back movie files from your

camera.

• While there is a connection between the camera and smartphone, recording by

pressing the camera’s shutter button or [0] (Movie) button is not supported.

• Depending on your smartphone model, its operating system version, and/or its

remaining storage capacity can cause failure of a movie or snapshot save

operation. Receiving a camera file, perform the required operation on your

smartphone to check if the file was stored properly.

• Location information is not added to snapshot data stored in camera memory.

• A movie received on an Android ™ terminal:

– Movies are not displayed by Gallery app. Movies are stored in a folder named

EXILIM Connect.

– A separate movie player is required to playback movies (whose files have the file

name extension MOV).

– Depending on your movie player, you may not be able to playback movies and/

or audio.

• Images recorded on another manufacturer’s camera cannot be sent using this

function.

NOTE

• Note that using wireless functions requires more battery power usage than normal.

Make sure that the camera battery is sufficiently charged before starting a wireless

LAN operation.

• The operating range depends on the local communication environment and on the

type of smartphone you are connected to.

View on phone

View snapshots stored in camera memory on a

smartphone, and copy snapshots and movies

to a smartphone for viewing. You can also view

snapshots and movies in camera memory on a

computer, and copy them to a computer (page

86).

Add location info to snapshots

Configure settings to have a smartphone add

shooting location information (latitude,

longitude) to snapshots when they are sent

from the camera (page 90).

With this function: You can do this:

77 Connecting the Camera with a Smartphone

(Wireless Connection)

. About EXILIM Connect

For detailed information about EXILIM Connect, refer to the EXILIM Connect User’s

Guide (which you can download at the website below).

http://www.exilim.com/manual/

• Note that to view the EXILIM Connect User’s Guide (PDF), you will have to install

Adobe Reader. Consult CASIO authorized service center if you are unable to open

to display the PDF format User’s Guide.

• Note that EXILIM Connect User’s Guides may not be available in all languages. If

you cannot find a EXILIM Connect User’s Guide in your native language, please

use a version in another language.

78 Connecting the Camera with a Smartphone

(Wireless Connection)

Your camera has a variety of different wireless

modes. Select the wireless mode that suits your

specific requirements.

1. Touch “ ” (Show Icons).

2. Touch the “ ” (Wireless) icon.

This will display the wireless mode screen.

3. Touch the wireless mode you want.

• To exit the wireless mode, touch “ ”.

Using a Wireless Mode

Send to phone

Select to view images you shoot with the camera on a smartphone (pages 85,

86).

Pairing

Select this mode to establish a Bluetooth wireless technology connection

between the camera and a smartphone (page 80).

Shoot with phone

Select this mode for remote control of image recording from a smartphone

(page 84).

Wireless settings

Select this mode to configure wireless settings (page 87).

“ ” (Wireless)

79 Connecting the Camera with a Smartphone

(Wireless Connection)

Installing the EXILIM Connect Smartphone app on your smartphone makes it

possible to remotely control the camera from your smartphone and to send images

recorded with the camera to your smartphone. Search the EXILIM Connect app on

Google Play ™ or App Store and install it on your smartphone.

. App operation guarantees

No guarantees are made concerning the ability to operate the EXILIM Connect app

on any particular smartphone or tablet.

IMPORTANT!

• App functions and the required operating environment are subject to change

without notice.

. Android terminal

1. Open “Play Store” (Google Play).

2. In the search field, type “EXILIM Connect”.

3. Install “EXILIM Connect”.

. iPhone (iOS)

1. Open “App Store”.

2. In the search field, type “EXILIM Connect”.

3. Install “EXILIM Connect”.

Getting Ready to Establish a Connection between a

Smartphone and Your Camera

For information about OS versions (Android and iOS) supported by the

EXILIM Connect app, visit the Google Play or the App Store download site, or

the Official CASIO Digital Camera Website (http://www.exilim.com/).

Installing the EXILIM Connect App on Your Smartphone

80 Connecting the Camera with a Smartphone

(Wireless Connection)

The first time you establish a wireless connection between the camera and a

smartphone, you need to use the procedure below to configure wireless connection

settings. This operation is required for the first connection only.

. Smartphone that supports Bluetooth low energy technology

Connecting the camera to a smartphone using Bluetooth wireless technology

(pairing) makes it simple to configure wireless connection settings.

IMPORTANT!

• Performing this operation automatically configures your smartphone’s wireless

LAN connection settings (page 82).

• Your camera can be paired with a single smartphone at one time.

• Some smartphone models may not be compatible with this camera.

• If you want to re-pair the camera with the smartphone it is already paired with, first

unpair them and then pair again. Re-pairing the camera and smartphone will result

in all pending unsent images to remain unsent.

Camera (Controller) Operation

1. Touch the “ ” (Wireless) icon.

This will display the wireless mode screen.

2. Touch “Pairing”.

3. Touch “Start”.

• You can start pairing by performing an operation on the camera, without using

the controller.

On the camera, hold down [p] (Power) for about two seconds to turn off

power.

On the camera, hold down [p] (Power) for about six seconds.

The camera’s operation lamp will flash amber.

Smartphone Operation

4. Start up the “EXILIM Connect” app.

5. Tap “Pairing”.

Establishing a Wireless Connection for the First Time

81 Connecting the Camera with a Smartphone

(Wireless Connection)

6. On the smartphone, tap the camera’s name you want to pair with.

This completes pairing of the camera and smartphone, and establishes a

Bluetooth wireless technology connection.

• In the case of an Android terminal, wireless LAN connection settings are also

configured automatically. In this case, advance to step 10 of this procedure. If

the screen shown in step 10 is not displayed, use the smartphone’s Wi-Fi

settings to select the SSID displayed on the camera and establish a wireless

LAN connection between the camera and smartphone.

• In the case of an iPhone (iOS), you need to configure wireless LAN settings

(install a profile) next. Advance to step 7 of this procedure.

7. On the smartphone, tap “Install”.

Follow the instructions that appear on the smartphone to install the profile

required for wireless LAN setup.

• On some smartphone models, the passcode input screen may appear. If this

happens, input your smartphone’s passcode.

8. After installation of the profile is complete, tap “Done” on the

smartphone.

9. On the smartphone screen, tap “Back to App”.

This establishes a wireless LAN connection between the camera and

smartphone.

• If you are using an iPhone (iOS) and there is no wireless LAN connection

between the camera and smartphone, use the smartphone’s Wi-Fi settings to

select the camera’s SSID to establish a wireless LAN connection between the

camera and smartphone.

10.

On the smartphone, tap “OK”.

11.

Follow the instructions that appear on the smartphone to complete the

pairing operation.

NOTE

• “Auto Send” (page 87) will be turned on after you configure wireless connection

settings on the camera and smartphone.

• Turning off the camera also terminate the Bluetooth wireless technology

connection.

82 Connecting the Camera with a Smartphone

(Wireless Connection)

. Smartphone that does not support Bluetooth low energy

technology

Configure smartphone wireless LAN connection settings (input the camera SSID and

password).

1. Touch the “ ” (Wireless) icon.

2. Touch “Shoot with phone”.

3. Touch “Start”.

This will enable connection with a smartphone and the

camera will display a screen for input of an SSID and

password, and camera’s wireless LAN connection

lamp will flash blue.

4. For the smartphone’s Wi-Fi settings, enter the camera’s SSID and

password to establish a wireless LAN connection between the camera

and smartphone.

When the smartphone establishes a wireless LAN connection with the camera,

the camera’s wireless LAN connection lamp lights blue and the message “Start

up the phone app.” appears on the controller’s monitor screen.

• What you need to do to establish a wireless LAN connection depends on the

type of smartphone you are using. For details about how to establish a wireless

LAN connection see the user documentation that comes with your smartphone.

• The camera SSID (which cannot be changed) and password (initial default) are

shown below.

SSID: FR100L-XXXXXX (6-character alphanumeric ID)

Password: 00000000

5. On the smartphone, start up “EXILIM Connect”.

NOTE

• You can also use the procedure below to establish a wireless LAN connection

between the camera and smartphone.

On the camera, hold down [p] (Power) for about two seconds to turn off power.

On the camera, while holding down [0] (Movie), hold down [p] (Power) for

about one second.

The camera’s wireless LAN connection lamp will flash blue.

On the smartphone, select the camera’s SSID.

SSID

Password

83 Connecting the Camera with a Smartphone

(Wireless Connection)

. What to do if you are unable to establish a wireless LAN connection

between the camera and a smartphone.

This problem may be caused when the smartphone is already wirelessly connected to

one of the networks or devices below. Go to your smartphone’s Wi-Fi settings and

select this camera’s SSID.

– Household wireless LAN

– Public wireless LAN

– Portable wireless LAN device

84 Connecting the Camera with a Smartphone

(Wireless Connection)

This function lets you remotely shoot a snapshot or movie with the camera using a

smartphone. You also can perform remote zoom and other operations as well.

NOTE

• When using a smartphone to shoot with the camera, you can add location

information obtained by the smartphone to the image data. For information about

how to do this, refer to the EXILIM Connect User’s Guide (page 77).

.Bluetooth Wireless Technology Connection

1. Perform one of the operations below.

– Enter the sleep mode.

 Turn on the camera and controller.

 On the controller, press [p] (Power).

This will enter the sleep mode, which is indicated by the camera’s operation

lamp slowly flashing green.

– Display the wireless mode screen.

 Touch “ ” (Show Icons).

 Touch the “ ” (Wireless) icon.

2. On the smartphone, start up the “EXILIM Connect” app.

3. On the smartphone, tap “Remote Capture”.

4. Compose the image on the smartphone’s screen as you shoot.

For information about how to use “Shoot with phone”, refer to the EXILIM Connect

manual (page 77).

.Cannot Connect with Bluetooth Wireless Technology

1. Touch the “ ” (Wireless) icon.

2. Touch “Shoot with phone”.

3. Touch “Start”.

• If there is a wireless LAN connection between the smartphone and camera,

advance to step 5 of this procedure.

4. For the smartphone’s Wi-Fi settings, select the SSID displayed on the

camera and establish a wireless LAN connection between the camera

and smartphone.

5. On the smartphone, start up the “EXILIM Connect” app.

Using a Smartphone as a Camera Remote Controller

(Shoot with phone)

85 Connecting the Camera with a Smartphone

(Wireless Connection)

6. Compose the image on the smartphone’s screen as you shoot.

For information about how to use “Shoot with phone”, refer to the EXILIM Connect

manual (page 77).

You can select one more snapshot and/or movie file in camera memory and send it to

a smartphone. You can select up to 50 files, totaling no more than 500MB for a single

send. After sending an image to a smartphone, you can then upload it to a social

networking service.

1. Touch the “ ” (Wireless) icon.

2. Touch “Send to phone”.

3. Touch “Send Selected Image”.

4. Touch the image you want to send to the smartphone.

Selecting the image of a file causes its check box to become selected.

• To exit the send image to smartphone operation, touch “Cancel”.

5. After selecting the images of all of the files you want to send to the

smartphone, touch “OK”.

For information about how to use “Send Selected Image”, refer to the EXILIM

Connect manual (page 77).

Sending a Snapshot or Movie File from Camera Memory to a

Smartphone (Send Selected Image)

86 Connecting the Camera with a Smartphone

(Wireless Connection)

You can connect the camera to a smartphone over wireless LAN to view and

download snapshots and movies in camera memory on up to eight connected

smartphones. You can also view snapshots and movies in camera memory on a

computer, and copy them to a computer. A smartphone does not need to have the

EXILIM Connect app installed in order to access camera images using this function.

1. Touch the “ ” (Wireless) icon.

2. Touch “Send to phone”.

3. Touch “View on phone”.

This establishes a connection between the smartphone and camera, and displays

a URL.

• If the message “Connect your phone to the access point below.” remains on

the camera’s monitor screen, change the smartphone’s Wi-Fi settings so your

camera is selected for connection (page 80).

4. On the smartphone, start up its browser app.

• Accessing the URL displayed by the camera will

display an image stored in camera memory.

• To exit the wireless LAN function, touch “Exit” on

the camera’s monitor screen.

IMPORTANT!

• Some smartphone models may not be able to play back movie files.

NOTE

• You can also view image in camera memory on a computer’s browser by

establishing a wireless LAN connection with the computer.

• For information about how to start up EXILIM Connect and view images, refer to

the EXILIM Connect manual (page 77). Note that the operation you need to

perform depends on whether or not there is a Bluetooth wireless technology

connection with the smartphone.

Viewing Snapshots and Movies in Camera Memory on a

Smartphone (View on phone)

URL

87 Connecting the Camera with a Smartphone

(Wireless Connection)

This section explains wireless mode operations and setting items.

1. Touch the “ ” (Wireless) icon.

This will display the wireless mode screen.

• Pressing the shutter button will return to the screen that was displayed before

the wireless mode screen.

2. Touch “Wireless settings”.

This will display the wireless setting screen.

3. Touch the item you want to configure.

4. Change the setting of the selected item.

• Changing a setting returns to the wireless mode screen.

Procedure

“ ” (Wireless) * Wireless settings * Auto Send

While “On” is selected for this setting, images are sent to the paired smartphone

automatically. Images are sent to the smartphone while the camera is in the sleep

mode. If there is no wireless connection between the camera and smartphone, the

images will be sent as soon as a connection is established.

• The camera’s wireless LAN connection lamp will be flashing or lit while an image

send operation is in progress. The lamp will go out after the image send operation

is complete.

IMPORTANT!

• Auto Send cannot be enabled unless the camera is paired with a smartphone

(page 80).

• Images recorded with Interval Shooting cannot be automatically sent to a

smartphone using Auto Send.

Configuring Wireless Connection Settings

Having Images Shot with the Camera Sent to a Smartphone

Automatically (Auto Send)

88 Connecting the Camera with a Smartphone

(Wireless Connection)

NOTE

• Auto Send can be used only with a smartphone that supports Bluetooth low energy

technology. Both a Bluetooth and wireless LAN connection are required between

the camera and smartphone to auto send camera images.

• You can specify the size of the image sent to the smartphone using “Resize When

Sending” (page 89).

• You can use the smartphone apps below to view snapshots after sending them.

– iPhone: Camera Roll

– Android terminal: Gallery, Photo, or another photo browser app

• Images shot while the Auto Send setting is “On” will be sent to the smartphone,

even if the Auto Send setting is changed to “Off” before they are sent.

• If the connection between the camera and smartphone is terminated while there

are still unsent images, Auto Send will be cancelled. The next time the camera and

smartphone are turned on and the camera enters the Sleep Mode, the Auto Send

operation will restart.

• If you delete an image that has not yet been sent to the smartphone, it will not be

included in the next Auto Send.

Procedure

“ ” (Wireless) * Wireless settings * Auto Send File Settings

Specifies the files to be sent to a smartphone by Auto Send.

IMPORTANT!

• The maximum size movie file that can be sent by Auto Send is 100 MB.

• Auto Send File Settings cannot be configured unless the camera is paired with a

smartphone (page 80).

Specifying Images to be Sent by Auto Send

(Auto Send File Settings)

T » Snapshots and movies are sent.

T Only Only snapshots are sent.

89 Connecting the Camera with a Smartphone

(Wireless Connection)

Procedure

“ ” (Wireless) * Wireless settings * Resize When Sending

This feature can be use to resize snapshots before they are sent to a smartphone

using “Shoot with phone” or “Send to phone”.

NOTE

• Resizing is supported for images recorded with this model camera only.

Resizing Snapshots before Sending Them to a Smartphone

(Resize When Sending)

Images are converted to 3M size before being sent.

• If an original image is 3M size or smaller, it is sent without

resizing.

Off Images are sent in the size they were originally recorded.

90 Connecting the Camera with a Smartphone

(Wireless Connection)

Procedure

“ ” (Wireless) * Wireless settings * Location info

You can enable the setting below to have the smartphone acquire and record location

information (latitude and longitude) when you shoot a snapshot with the camera.

Then when you send the snapshot to the smartphone, the location information will be

added to it. Note that location information is not added to movies or to images shot

automatically with Interval Shooting.

IMPORTANT!

• Location information can be recorded only while there is a Bluetooth wireless

technology connection between the camera and smartphone.

• To select “On” for the camera’s “Location info” setting, pair the camera with a

smartphone (page 80).

• While “On” is selected for “Location info”, the smartphone acquires and records

location information each time you shoot a snapshot with the camera.

• Location information is not added to snapshot data stored in camera memory. It is

added when the snapshot is sent to the smartphone.

• To use this function, your smartphone’s location services must be enabled, and it

must be where location information can be received. Location information will not

be available to add to images if the smartphone is unable to receive location

information.

• You can check whether or not location information was added successfully on the

smartphone’s image receive screen.

• Up to 10,000 location records can be maintained by the smartphone. If there are

already 10,000 records, shooting a new snapshot will cause the oldest location

record to be deleted to make room for the new one.

• Enabling location-based services causes the location information, and other

personally identifiable information to be included in the snapshot data. Take care

when sharing or publishing such images on web services, etc.

• This camera is not designed to be used for navigation, surveying, or other activities

that require precision instruments.

Add Location Info to Snapshots (Location info)

Smartphone acquires and records location information when a

snapshot is shot, and adds it to the image data when the snapshot

is sent to the camera.

Off Location information is not acquired or added.

91 Connecting the Camera with a Smartphone

(Wireless Connection)

Procedure

“ ” (Wireless) * Wireless settings * WLAN password

Use procedure to change the password you used when establishing a wireless LAN

connection between the camera and a smartphone.

IMPORTANT!

• Before changing the wireless LAN password, unpair the camera from its paired

smartphone (page 92).

1. Touch the password digit you want to change.

2. Touch “ ” or “ ” to change the currently selected digit.

3. When the password is the way you want, touch “OK”.

NOTE

• Changing the wireless LAN password will terminate the connection with the

smartphone. To reconnect with the smartphone, configure wireless connection

settings (page 80). If your smartphone does not support Bluetooth low energy

technology, perform the operations below to change your smartphone’s Wi-Fi

settings.

– iPhone:

Tap the right arrow of the field where the SSID of the camera is displayed in the

Wi-Fi settings to delete network settings. After deleting, select the camera SSID

again and input the new password.

– Android terminal:

Tap the field where the SSID of the camera is displayed in the Wi-Fi settings and

select Forget. Select the camera SSID again and input the new password.

Changing the Camera Password for Wireless LAN Connection

(WLAN password)

92 Connecting the Camera with a Smartphone

(Wireless Connection)

Procedure

“ ” (Wireless) * Wireless settings * Unpairing

Unpairs the camera from a smartphone.

To use the camera with a different smartphone, first unpair it from the current

smartphone.

NOTE

• When unpairing, be sure also to perform the unpairing operation on the

smartphone as well. For details, refer to the EXILIM Connect User’s Guide (page

77).

• Unpairing the camera from a smartphone will result in all pending unsent images to

remain unsent.

Unpairing the Camera from a Smartphone (Unpairing)

93 Printing

Printing

There are a variety of different ways to print images stored on a computer. This

section shows one standard printing example.

.Printing on a Windows Computer

1. Use the procedure under “Viewing and Storing Images on a Computer”

(page 95) to store the image you want to print, and then display the

image on your computer screen.

2. Click “Print” and then “Print”.

3. Configure the desired print settings and then click “Print”.

.Printing on a Macintosh

1. Use the procedure under “Connecting the Camera to Your Computer

and Saving Files” (page 98) to store the image you want to print, and

then display the image on your Macintosh screen.

2. Click “File” and then “Print”.

3. Configure print settings and then click “Print”.

This will print the selected image.

Professional Print Service

You can take a memory card that contains the images you want

to print to a professional print service and have them printed.

Printing on a Home Printer

You can use a printer equipped with a memory card slot

to print images directly from a memory card. For details,

see the user documentation that comes with your

printer.

Printing with a Computer

After transferring the images to your computer, use

commercially available software to print.

Printing with a Computer

94 Using the Camera with a Computer

Using the Camera with a Computer

You can perform the operations described below while the camera is connected to a

computer.

The procedures you need to perform are different for Windows and the Macintosh.

• The above recommended computer system environments do not guarantee proper

operation.

• The type of computer being used, certain settings, and other installed software

may interfere with proper operation.

Things you can do using a computer...

Save images to a

computer and

view them there

• Save images and view them manually

(USB connection) (pages 95, 98).

Play back and

edit movies

• You can play back movies (pages 97,

100).

• To edit movies, use commercially

available software as required.

• Windows users should refer to “Using the Camera with a Windows Computer”

on page 94.

• Macintosh users should refer to “Using the Camera with a Macintosh” on page

98.

Using the Camera with a Windows Computer

When you want to

do this:

Operating

System Version Required Software

Save images to a

computer and view

them there manually

Windows 10,

Windows 8.1,

Windows 7,

Windows Vista

Installation not required.

Play movies

Windows 10,

Windows 8.1,

Windows 7

Windows Media Player 12

Windows Vista

Software that can play movie files with

the file name extension MOV.

You may need to download the software

on the Web.

95 Using the Camera with a Computer

You can connect the camera to your computer in order to view and store images

(snapshot and movie files).

IMPORTANT!

• Never unplug the USB cable, or operate the camera while viewing or storing

images. Doing so can cause data to become corrupted.

NOTE

• You also can use your computer’s card slot (if it has one) or a commercially

available card reader to access image files directly from the camera’s memory

card. For details, see the user documentation that comes with your computer.

.To connect the camera to your computer and save files

1. On the camera, hold down [p]

(Power) for about two seconds

to turn off power. Next, use the

micro USB cable that comes

with the camera to connect it

to your computer’s USB port.

• For details about connecting to

the camera and precautions

when connecting, see page 24.

2. Press [p] (Power) to turn on the camera.

When you turn on the camera, check to make sure that the color of its operation

lamp changes from red to green or amber (page 24). Note that in this case the

monitor screen will remain blank.

• The first time you connect the camera to your computer with the USB cable, an

error message may appear on your computer. If this happens, disconnect and

then reconnect the USB cable.

Viewing and Storing Images on a Computer

Never use your computer to modify, delete, move, or rename any image files

that are in the camera’s built-in memory or on its memory card.

Doing so can cause problems with the camera’s image management data, which

will make it impossible to play back images on the camera and can drastically alter

remaining memory capacity. Whenever you want to modify, delete, move, or

rename an image, do so only on images that are stored on your computer.

USB

Micro USB cable

(included with camera)

[USB] port

96 Using the Camera with a Computer

3. Windows 10 users: Click “Start” and then “Explorer”. Next, in the

sidebar, click “PC”.

Windows 8.1 users: Click “Desktop” and then “Explorer”.

Windows 7, Windows Vista users: Click “Start” and then “Computer”.

4. Double-click “Removable Disk”.

• Your computer recognizes the memory card loaded in the camera (or built-in

memory if there is no card) as a removable disk.

5. Right-click the “DCIM” folder.

6. On the shortcut menu that appears, click “Copy”.

7. Windows 10, Windows 8.1 users: Click “Documents”.

Windows 7, Windows Vista users: Click “Start” and then “Documents”.

• If you already have a “DCIM” folder in “Documents”, the next step will overwrite

it. If you want to keep the existing “DCIM” folder, you need to change its name

or move it to a different location before performing the next step.

8. Windows 10, Windows 8.1 users: On the “Documents” menus, click

“Home” and then “Paste”.

Windows 7, Windows Vista users: On the “Documents” menu, click

“Organize” or “Edit”, and then “Paste”.

This will paste the “DCIM” folder (and all the image files it contains) into your

“Documents” folder. You now have a copy of the files that are in camera memory

on your computer.

• After copying images, it is recommended that you right-click the DCIM folder

and change its name to something else.

9. After you finish copying images, disconnect the camera from the

computer.

After the copy or read progress dialog on the computer’s screen indicates that the

process is complete, close the displayed image and then disconnect the USB

cable.

97 Using the Camera with a Computer

.To view images you copied to your computer

1. Double-click the copied “DCIM” folder to open it.

2. Double-click the folder that contains the images you want to view.

3. Double-click the image file you want to view.

• For information about file names, see “Memory Folder Structure” on page 102.

• An image that was rotated on the camera will be displayed on your computer

screen in its original (unrotated) orientation.

• Viewing CS and interval shot images on a computer will individually display the

component images in the group. CS and interval shooting images cannot be

viewed as a group on a computer.

.Movie Playback Precautions

• To play back a movie, first save it to your computer and then double-click the movie

file. Proper movie playback may not be possible for data accessed over a network,

from a memory card, etc.

• Proper movie playback may not be possible on some computers. If you experience

problems, try the following.

– Quit any other applications you have running, and stop resident applications.

98 Using the Camera with a Computer

• The above recommended computer system environments do not guarantee proper

operation.

• Proper operation depends on the level of performance of the computer you are

using.

IMPORTANT!

• Never unplug the USB cable, or operate the camera while viewing or storing

images. Doing so can cause data to become corrupted.

• The camera does not support operation with Mac OS X 10.0 to 10.4. Operation is

supported with Mac OS 10.5 to 10.12 (using the OS standard USB driver) only.

NOTE

• You also can use your computer’s card slot (if it has one) or a commercially

available card reader to access image files directly from the camera’s memory

card. For details, see the user documentation that comes with your computer.

Using the Camera with a Macintosh

When you want to do this:

Operating

System Version

Required Software

Save images to your

Macintosh and view them

there manually

OS X Installation not required.

Play movies OS X 10.5 or

higher

QuickTime Player

(installed on computer)

Connecting the Camera to Your Computer and Saving Files

Never use your computer to modify, delete, move, or rename any image files

that are in the camera’s built-in memory or on its memory card.

Doing so can cause problems with the camera’s image management data, which

will make it impossible to play back images on the camera and can drastically alter

remaining memory capacity. Whenever you want to modify, delete, move, or

rename an image, do so only on images that are stored on your computer.

99 Using the Camera with a Computer

.To connect the camera to your computer and save files

1. On the camera, hold down [p]

(Power) for about two seconds

to turn off power. Next, use the

micro USB cable that comes

with the camera to connect it

to your computer’s USB port.

• For details about connecting to

the camera and precautions

when connecting, see page 24.

2. Press [p] (Power) to turn on the camera.

When you turn on the camera, check to make sure that the color of its operation

lamp changes from red to green or amber (page 24). Note that in this case the

monitor screen will remain blank.

In this mode, your Macintosh recognizes the memory card loaded in the camera

(or the camera’s built-in memory if it does not have a memory card loaded) as a

drive. The appearance of the drive icon depends on the Mac OS version you are

using.

• The first time you connect the camera to your Macintosh with the USB cable,

an error message may appear on your computer. If this happens, disconnect

and then reconnect the USB cable.

3. Double-click the camera’s drive icon.

4. Drag the “DCIM” folder to the folder to which you want to copy it.

5. After the copy operation is complete, drag the drive icon to Trash.

6. Disconnect the camera from the computer.

After the copy or read progress dialog on the computer’s screen indicates that the

process is complete, close the displayed image and then disconnect the USB

cable.

USB

Micro USB cable

(included with camera)

[USB] port

100 Using the Camera with a Computer

.To view copied images

1. Double-click the camera’s drive icon.

2. Double-click the “DCIM” folder to open it.

3. Double-click the folder that contains the images you want to view.

4. Double-click the image file you want to view.

• For information about file names, see “Memory Folder Structure” on page 102.

• An image that was rotated on the camera will be displayed on your Macintosh

screen in its original (unrotated) orientation.

.Movie Playback Precautions

• To play back a movie, first save it to your computer and then double-click the movie

file. Proper movie playback may not be possible for data accessed over a network,

from a memory card, etc.

• Proper movie playback may not be possible on some Macintosh models. If you

experience problems, try the following.

– Shut down other applications that are running.

101 Using the Camera with a Computer

The camera creates a file each time you shoot a snapshot, record a movie, or

perform any other operation that stores data. Files are grouped by storing them in

folders. Each file and folder has its own unique name.

• For details about how folders are organized in memory, see “Memory Folder

Structure” (page 102).

• You can view folder and file names on your computer. For details about how file

names are displayed on the camera’s monitor screen, see page 11.

• The total number of folders and files allowed depends on the image size and

quality, and capacity of the memory card being used for storage.

Files and Folders

Name and Maximum Number Allowed Example

File

Each folder can contain up to 9999 files named

CIMG0001 through CIMG9999. The extension

on the file name depends on the file type.

26th file name:

Folders

Folders are named from 100CASIO to

999CASIO.

There can be up to 900 folders in memory.

First folder name:

C I MG 0 0 2 6 . J P G

Extension

Serial number (4 digits)

1 0 0 C A S I O

Serial number (3 digits)

103 Using the Camera with a Computer

.Built-in Memory and Memory Card Data Handling Precautions

• Whenever copying memory contents to your computer, you should copy the DCIM

folder and all of its contents. A good way to keep track of multiple DCIM folders is

to change their names to dates or something similar after you copy them to your

computer. If you later decided to return a DCIM folder to the camera, however, be

sure to change its name back to DCIM. The camera is designed to recognize only a

root file with the name DCIM. Note the camera also will not be able to recognize the

folders inside the DCIM folder unless they have the names they originally had

when you copied them from the camera to your computer.

• Folders and files must be stored in accordance with the “Memory Folder Structure”

shown on page 102 in order for the camera to be able to recognize them correctly.

104 Other Settings (Set Up)

Other Settings (Set Up)

This section explains menu items that you can use to configure settings and perform

other operations in both the REC mode and PLAY mode.

Procedure

MENU * “¥ Setup” Tab * Screen

You can use the following procedure to change the brightness of the monitor screen.

Procedure

MENU * “¥ Setup” Tab * Info

Selecting “On” displays setup status and other information.

For information about menu operations, see page 54.

Adjusting Monitor Screen Brightness (Screen)

+2 Brightness that is greater than +1, which makes the screen easier to view.

This setting consumes more power.

+1 Bright setting for outdoor use, etc. Brightness that is greater than 0.

0Normal monitor screen brightness for indoor use, etc.

–1 Screen brightness for viewing in a dark environment without disturbing

others around you.

–2 Brightness that is darker than –1, which makes the screen easier to view

in dark locations.

Selecting Display Information (Info)

105 Other Settings (Set Up)

Procedure

MENU * “¥ Setup” Tab * Rotation Lock

You can use this setting to fix the orientation of the camera or controller screen

image, or allow the orientation to be detected and automatically rotated as required.

NOTE

• Certain playback environment may cause images to be displayed using the wrong

orientation.

Procedure

MENU * “¥ Setup” Tab * Camera Sound

You can adjust the volume of the sound emitted when the camera is turned on, when

an image is shot, when an error occurs, etc.

• Regardless of this setting, no recording sound is emitted during an Interval

Shooting operation.

Locking the Camera or Controller Screen Orientation

(Rotation Lock)

Camera

Off

The camera detects its orientation when you are

shooting, and stores orientation information along

with the image data. During playback of an image,

it is displayed in accordance with the orientation

information.

On The camera does not detect its orientation, and

images are always stored in landscape orientation.

Controller

Off Display image is rotated according to the controller

orientation.

Display image orientation is fixed at where it was

when “On” is selected for the controller’s Rotation

Lock setting.

Configuring Camera Sound Settings (Camera Sound)

High volume

Low volume

106 Other Settings (Set Up)

Procedure

MENU * “ Vibration¥ Setup” Tab *

While “On” is selected for this function, the controller will vibrate whenever any one of

the events described below occurs.

• When a “Type 1” review image is displayed on the controller immediately after

shooting

• When communication between the camera and controller is lost

• When an error occurs

• While focus is locked

Procedure

MENU * “¥ Setup” Tab * Adjust

1. Touch the value you want to change (year,

month, day, hour, minute).

2. Touch “ ” or “ ” to change the currently

selected value.

• You can specify a date from 2001 to 2049.

• To switch between 12-hour and 24-hour format,

touch the 12/24 hour switch icon.

• Touching and holding “ ” or “ ” scrolls at high

speed.

3. Touch “OK”.

NOTE

• While the camera is connected to a smartphone with the EXILIM Connect app, you

can execute auto date and time adjustment. The camera’s time zone will be

changed automatically in accordance with the smartphone’s time zone. For details,

see the EXILIM Connect User’s Guide (page 77).

Using the Vibration Function (Vibration)

Setting the Camera’s Clock (Adjust)

12/24 hour switch icon

107 Other Settings (Set Up)

Procedure

MENU * “¥ Setup” Tab * Date Style

You can select from among three different styles for the date.

Example: July 10, 2017

Procedure

MENU * “¥ Setup” Tab * Language

. Specify the display language you want.

1. Flick upwards and downwards until you find the

language you want, and then touch to select it.

• Camera models sold in certain geographic areas may not support display language

selection.

Procedure

MENU * “¥ Setup” Tab * Sleep

Use this function to specify how much time should be allowed to laps until the

controller display goes blank and the controller enters the sleep state. You can

specify either 30 seconds (30 sec), 1 minute (1 min) or 5 minutes (5 min).

Specifying the Date Style (Date Style)

YY/MM/DD 17/7/10

DD/MM/YY 10/7/17

MM/DD/YY 7/10/17

Specifying the Display Language (Language)

Specifying the Controller Sleep State Trigger Time (Sleep)

108 Other Settings (Set Up)

Procedure

MENU * “¥ Setup” Tab * Format

If a memory card is loaded in the camera, this operation will format the memory card.

It will format built-in memory if no memory card is loaded.

• The format operation will delete all contents on the memory card or in built-in

memory. It cannot be undone. Make sure you do not need any data currently on

the card or in built-in memory before you format it.

• Formatting built-in memory or a memory card will delete all protected images

stored there.

• Check the battery level before starting a format operation and make sure it is not

too low. Formatting may not be performed correctly and the camera may stop

operating normally if the camera powers down while formatting is in progress.

Procedure

MENU * “¥ Setup” Tab * Reset

See page 140 for details about the camera’s factory default settings.

The settings below are not reset.

Clock settings, date style, screen language, WLAN password

NOTE

• Resetting the camera does not unpair it from a smartphone (page 80).

Formatting Built-in Memory or a Memory Card (Format)

Resetting the Camera to Factory Defaults (Reset)

109 Other Settings (Set Up)

Procedure

MENU * “¥ Setup” Tab * Version

Selecting this menu item displays the camera model name, the version of firmware

installed on the camera.

• Check this screen after updating the camera’s firmware to confirm that updating

was actually performed.

Checking the Current Camera Firmware Version (Version)

110 Appendix

Appendix

*DANGER

This symbol indicates information that, if ignored or applied incorrectly, creates the

danger of death or serious personal injury.

*WARNING

This indication stipulates matters that have the risk of causing death or serious injury

if the product is operated incorrectly while ignoring this indication.

*CAUTION

This indication stipulates matters that have the risk of causing injury as well as

matters for which there is the likelihood of damage only if the occurrence of physical

product is operated incorrectly while ignoring this indication.

Symbol Examples

Safety Precautions

!This circle with a line through it (-) means that the indicated action must not

be performed. Indications within or nearby this symbol are specifically

prohibited. (The example at left indicates that disassembly is prohibited.)

The black dot (0) means that the indicated action must be performed.

Indications within this symbol are actions that are specifically instructed to be

performed. (The example at left indicates that the power plug must be

unplugged from the electrical socket.)

*DANGER

. Built-in Rechargeable Battery

• To charge the battery, use only the method specifically described in this

manual. Attempting to charge the battery by an unauthorized means

creates the risk of battery overheating, fire, and explosion.

• Do not expose or immerse the battery in fresh water or salt water. Doing

so can damage the battery, and cause deterioration of its performance

and loss of service life.

• The battery is intended for use with a CASIO Digital Camera only. Use

with any other device creates the risk of the battery damage, or

deterioration of battery performance and service life.

111 Appendix

• Failure to observe any of the following precautions creates the risk of battery

overheating, fire, and explosion.

– Never use or leave the battery near open flame.

– Do not expose the battery to heat or fire.

– Make sure the battery is oriented correctly when charging it.

– Never carry or store the battery together with items that can conduct electricity

(necklaces, pencil lead, etc.).

– Never disassemble the battery, pierce it with a needle, or expose it to strong

impact (hit it with a hammer, step on it, etc.), and never apply solder to it.

Never place the battery into a microwave oven, dehumidifier, high-pressure

generating device, etc.

– Never remove the outer sticker from the battery.

• Do not use or leave the battery under direct sunlight, in an automobile

parked in the sun, or in any other area subject to high temperatures.

Doing so can damage the battery, and cause deterioration of its

performance and loss of service life. Also, these conditions can cause the

battery to swell to the point that you may not be able to remove it.

• Battery fluid can damage your eyes. Should battery fluid get into your

eyes accidentally, immediately rinse them with clean tap water and then

consult a physician.

DANGER

112 Appendix

WARNING

. Smoke, abnormal odor, overheating, and other abnormalities

• Continued use of the camera while it is emitting smoke or strange odor,

or while it is overheating creates the risk of fire and electric shock.

Immediately perform the following steps whenever any of the above

symptoms are present.

1. Turn off the camera.

*If the camera will not turn off for some reason, press the [RESET] button

(page 8).

2. If you are using the USB-AC adapter to power the camera, unplug the power

plug from the power outlet.

3. Contact your retailer or nearest CASIO authorized service center.

. Keep Away From Fire

• Never expose the camera to fire, which can cause it to explode and

creates the risk of fire and personal injury.

. Avoid Use While In Motion

• Never use the camera to record or play back images while operating an

automobile or other vehicle, or while walking. Looking at the monitor

while in motion creates the risk of serious accident.

. USB-AC Adapter

• Misuse of USB-AC adapter creates the risk of fire and electric shock. Be sure to

observe the following precautions.

– Use only the specified USB-AC adapter.

– Never use the USB-AC adapter with another device.

– Use a power outlet that matches the power supply specified for the

USB-AC adapter.

– Never plug the USB-AC adapter or power cord into a wall outlet that is shared

by other devices, or into a shared extension cord.

– Never locate the USB-AC adapter near a stove or other heating device.

• Misuse of the USB-AC adapter can cause them to become damaged, creating

the risk of fire and electric shock. Be sure to observe the following precautions.

– Never place heavy objects on the USB-AC adapter or subject it to

direct heat.

– Do not modify the USB-AC adapter, allow it to become damaged, or

forcibly bend it.

– Do not twist or pull on the power cord.

– When in use, locate the cord where it will not be tripped over.

113 Appendix

• Never touch the power plug while your hands are wet. Doing so creates

the risk of electric shock.

• Should the power cord or power plug become damage, contact your

retailer or nearest CASIO authorized service center.

• Do not use the USB-AC adapter in areas where liquids * might spill on

them. Liquids create the risk of fire and electric shock.

*Liquids: Water, sports drinks, seawater, animal or pet urine, etc.

• Do not place a flower vase or any other liquid container on top of the

USB-AC adapter. Water creates the risk of fire and electric shock.

• Do not touch the camera or USB-AC adapter during lightning storms.

If a power cord was included with your camera

• The power cord that comes with the camera is designed for use in the

country where the camera was purchased. If you use the camera in

another country, be sure to use a power cord that conforms to that

country’s ratings and power supply voltage. Use of an improper power cord

creates the risk of fire and electric shock.

• Before going out, be sure to unplug the USB-AC adapter from the power

outlet and put in a place away from objects used by animals and pets.

An animal or pet chewing on the power cord can cause it short, leading

to the risk of fire.

. Water and Foreign Matter

• Water, other liquids, or foreign matter (especially metal) getting inside

the camera creates the risk of fire and electric shock. Immediately

perform the following steps whenever any of the above symptoms are

present. Particular care is required when using the camera where it is raining or

snowing, near the ocean or other body of water, or in a bathroom.

1. Turn off the camera.

*If the camera will not turn off for some reason, press the [RESET] button

(page 8).

2. If you are using the USB-AC adapter to power the camera, unplug the power

plug from the power outlet.

3. Contact your retailer or nearest CASIO authorized service center.

. Disassembly and Modification

• Except when disposing of the camera, never try to take it apart or modify

it in any way. Doing so creates the risk of electric shock, burn injury, and

other personal injury. Be sure to leave all internal inspection,

maintenance, and repair up to your retailer or nearest CASIO authorized service

center.

WARNING

114 Appendix

. Dropping and Rough Treatment

• Continued use of the camera after it is damaged by dropping or other

rough treatment creates the risk of fire and electric shock. Immediately

perform the following steps whenever any of the above symptoms are

present.

1. Turn off the camera.

*If the camera will not turn off for some reason, press the [RESET] button

(page 8).

2. If you are using the USB-AC adapter to power the camera, unplug the power

plug from the power outlet.

3. Contact your retailer or nearest CASIO authorized service center.

. Memory Cards

• Memory cards are small and present a risk of accidentally being

swallowed by infants and young children. Keep memory cards out of the

reach of infants and young children. If a memory card is ever swallowed

accidentally, contact a physician immediately.

. Precaution when Camera is On

• Do not touch the camera for long periods while it is on. The camera

becomes warm when on, and long term contact creates the risk of low-

temperature burns.

. Interference with other digital devices

• Should you notice radio interference or other problems on other devices

is being caused while using this product, do not use the wireless

functions of this product. Use of wireless functions creates the risk of

radio interference and abnormal operation of other devices.

• When in a medical facility or aircraft, comply with instructions of

personnel in charge. Electromagnetic waves and other signals emitted

by the camera’s wireless function create the risk of accident.

• Do not use the camera’s wireless function while in the vicinity of high

precision digital devices or digital devices that use weak signals. Doing

so can interfere with proper operation of such digital devices and create

the risk of accident.

• When using the camera’s wireless function, keep it away from any

person wearing a pacemaker. Magnetism emitted by the camera may

affect cardiac pacemakers and other medical devices. Should you ever

notice any abnormality, immediately move away from the product and contact a

physician.

• On a crowded train or any other crowded location where there is the

possibility of being in the vicinity of a person wearing a cardiac

pacemaker, turn off the camera. Radio waves emitted by the camera’s

wireless function may affect pacemaker operation.

WARNING

115 Appendix

CAUTION

. USB-AC Adapter

• Misuse of the USB-AC adapter creates the risk of fire and electric shock. Make

sure you observe the following precautions.

– Never cover the USB-AC adapter or power cord with a quilt, blanket,

or other cover while it is in use, and do not use it near a heater. Doing

so can interfere with heat radiation and cause the area around them

to become hot.

– Do not use detergent when cleaning the power cord, the USB-AC adapter, or

the USB cable (especially the plugs and jacks).

– Insert the power plug into the wall outlet as far as it will go.

– Unplug the power plug from the wall outlet before leaving the camera

unattended for long periods, such as when leaving on a trip, etc.

– At least once a year, use a cloth or vacuum cleaner to clean any dust build up

on the prongs of the power plug and in the area around them.

– (Power cord included with your camera) When unplugging from the wall outlet,

never pull on the power cord. Grasp the power plug and pull.

. Built-in Rechargeable Battery

• If battery charging does not end normally within the specified charging

time, stop charging anyway and contact your local CASIO authorized

service center. Continued charging creates the risk of battery

overheating, fire, and explosion.

• Be sure to read the user documentation that comes with the camera

before using or charging the battery.

• Store batteries in a location that cannot be reached by infants and young

children. When using a battery where infants and young children are

present, be on guard to ensure that they do not have the chance to

remove the battery from the camera.

• Do not leave batteries near areas used by pets. A pet chewing on a

battery can lead to accidents caused by the battery leaking, overheating,

or exploding.

• Should fluid from a battery accidentally get onto clothing or your skin,

immediately rinse it off with clean tap water. Prolonged contact with

battery fluid can cause skin irritation.

. Connections

• Never plug any devices that are not specified for use with this camera

into connectors. Connecting a non-specified device creates the risk of

fire and electric shock.

. Unstable Locations

• Never place the camera on an unstable surface, on a high shelf, etc.

Doing so can cause the camera to fall, creating the risk of personal

injury.

116 Appendix

. Locations To Be Avoided

• Never leave the camera in any of the following types of locations. Doing so

creates the risk of fire and electric shock.

– Areas subject to large amounts of humidity or dust

– Food preparation areas or other locations where oil smoke is present

– Near heaters, on a heated carpet, in areas exposed to direct sunlight,

in a closed vehicle parked in the sun, or other areas subject to very high

temperatures

. Monitor Screen

• Do not apply strong pressure to the LCD panel surface or subject it to

strong impact. Doing so can cause the display panel glass to crack and

lead to personal injury.

• Should the monitor screen ever become cracked, never touch any of the

liquid inside the monitor screen. Doing so creates the risk of skin

inflammation.

• Should monitor screen liquid ever get into your mouth, immediately rinse

your mouth out and contact your physician.

• Should monitor screen liquid ever get into your eyes or onto your skin,

immediately rinse with clean water for at least 15 minutes and contact

your physician.

. Backing Up Important Data

• Always keep backup copies of important data in camera memory by

transferring it to a computer or other storage device. Note that data can

be deleted in the case of camera malfunction, repair, etc.

CAUTION

117 Appendix

This camera is designed to be shock resistant, splashproof, and dustproof as

described below.

0 Shock resistant:

Passes testing based on CASIO independent standards* 1 formulated according to

MIL-Standard 810F Method 516.5-Shock.* 2

*1 Drop testing of the camera and controller individually from a height of

1.7 meters (5.58 feet) onto plywood (lauan), 10 directions (6 faces, 4 corners)

(1.3 meters (4.27 feet) when camera and controller are combined)

*2 Though the camera is designed to withstand the effects of impact occurring

during normal daily use, very strong impact due to very rough handling such as

throwing the camera or dropping it from excessive heights can result in serious

damage. Even if a drop does not result in functional problems, it can cause

scratching and other cosmetic damage to the camera.

0 Splashproof:

Splashproof equivalent to IEC/JIS Class 8 (IPX8)* 3 and Class 6 (IPX6). Allows

continuous use during immersion in water to a depth up to 1.5 meters (4.92 feet)

for 60 minutes* 4 and protection against jet spray from all directions.* 5

*3 Signifies underwater use when immersed for a duration and at a pressure

specified by CASIO. Touch panel operation is not supported under water.

*4 Test conditions defined by CASIO.

*5 Use during high-speed travel on water during motor sports, while riding a

personal watercraft, etc. is not supported.

0 Dustproof:

Corresponds to IEC/JIS Protection Class 6 (IP6X) dustproofing.

IMPORTANT!

• The shock resistance, splashproofing, and dustproofing of this product are based

on CASIO test results, and do not constitute any guarantee that the product will

perform, will not be damaged, or will not malfunction under such conditions.

. Precautions before Underwater Use

This camera can be used to shoot images underwater up to a depth of 1.5 meters

(4.92 feet). However, the following precautions should be kept in mind before using

the camera underwater.

• When shooting in water or in an area where water droplets are getting on the

camera, the lens may fog while shooting or the next time you use the camera to

record images. This can be avoided by placing the camera, with its covers open,

into a plastic bag along with commercially available silica gel before shooting. This

will dry the interior of the camera and avoid lens fogging.

• Check the contact surfaces of the [CARD] cover and [USB] cover gaskets for dirt,

sand, and any other foreign matter. Clean contact surfaces by wiping them with a

soft, clean, dry cloth. Note that a single strand of hair or a single grain of sand can

allow water to leak into the camera.

• Check the [CARD] cover and [USB] cover splashproofing gaskets are free of

cracks, scratches, and other damage.

Shock resistant, Splashproof, Dustproof

118 Appendix

• Close the [CARD] cover and [USB] cover securely into place.

• Never open or close the [CARD] cover or [USB] cover while near water or in an

area exposed to sea breezes. Also avoid opening or closing the covers while your

hands are wet. Such conditions can cause fogging of the lens when shooting.

• This camera will sink if dropped underwater. Use the strap or some other means to

avoid dropping.

• The splashproofing of this camera protects it against salt water and fresh water

only. Protection is not provided against hot spring water.

• Never leave the camera for long periods in a location subjected to very low

temperatures or very high temperatures in excess of 40 °C (104°F). In particular,

avoid leaving the camera in areas exposed to strong direct sunlight, in a motor

vehicle on a hot day, etc. Any of these conditions can result in a deterioration of

splashproofing.

• Wireless communication with wireless LAN or Bluetooth wireless technology is not

supported under water. Connection between a submerged camera and a controller

or smartphone is not supported.

• Use of the controller’s touch panel is not supported while the controller is

submerged.

. Precautions during Underwater Use

• The camera is designed for use at depths no greater than 1.5 meters (4.92 feet)

and at water temperatures within the range of 0 °C to 40°C (32° °F to 104 F).

• Do not leave the camera submerged for more than 60 minutes.

• When repeatedly immersing the camera for underwater user, allow at least

15 minutes to elapse between immersions.

• Never open the [CARD] cover or [USB] cover while the camera is submerged.

• Do not dive into water while holding the camera. Also, do not use the camera in

rapids, under a waterfall, or in any other rough water condition. Exposing the

camera to strong water pressure can cause leaking and malfunction.

• Take care that you do not drop the camera into water or allow it to strike the

surface of the water. Doing so can cause leaking.

. Precautions after Underwater Use

• Before opening the [CARD] cover and [USB] cover, use a clean, dry, soft cloth to

wipe the camera free of all moisture and dirt.

• If you open the [CARD] cover and [USB] cover while the camera is wet, be sure to

wipe its inside surfaces free of all moisture before closing it. Allowing the covers to

remain wet can cause fogging of the lens when shooting.

119 Appendix

. Cleaning after Use

Perform the following steps to clean the camera after using it under water or after it

becomes soiled with sand, dirt, or mud. Note that the [CARD] cover and [USB] cover

must be closed securely when performing these steps.

1. Immerse the camera in fresh water.

• Fill a bucket or other container with tap water or other fresh

water, and immerse the camera for about 10 minutes.

Gently wipe dust, dirt, sand, and other matter from the

camera with your fingers.

• Do not rub the lens surface or monitor screen while dirty.

2. Wipe off all moisture.

• Use a clean, dry, soft cloth to wipe the camera dry. Moisture may remain on the

[CARD] cover and [USB] cover, even after you finish wiping the camera dry.

With the covers open, leave the camera in the shade in a well-ventilated

location to dry thoroughly. Closing the covers while they are still wet can cause

fogging of the lens when shooting.

IMPORTANT!

• The temperature of the water used to wash the camera should be no greater than

30°C (86°F). Never use detergent, hot water, or strongly running water to clean the

camera. Doing so creates the risk of leaking and malfunction.

• Never swing the camera around to remove water, and never use a dryer or other

intense heat to dry it.

• Never place the camera in a washing machine to wash it.

. Precautions after Use

• Do not leave the camera in an area exposed to extreme heat (40°C (104°F) or

greater) or cold (less than –5°C (23°F)). Doing so can cause loss of splashproofing.

• Never use chemical agents for the purpose of cleaning, rust proofing, moisture

proofing, etc. Doing so can cause loss of splashproofing.

• Use fresh water to clean the camera within 60 minutes after using it underwater.

Failure to do so can cause deterioration of the exterior finish and splashproofing

properties.

• In order to maintain splashproofing, replacement of the camera’s gaskets is

recommended once each year. Note that you will be charged for gasket

replacement. Contact a CASIO authorized service center or your original retailer

for gasket replacement.

121 Appendix

. Data Error Precautions

Your digital camera is manufactured using precision digital components. Any of the

following creates the risk of corruption of data in camera memory.

– Removing the memory card while the camera is performing some operation

– Removing the memory card while the operation lamp is lit green after turning off the

camera

– Disconnecting the USB cable while communication is in progress

– Other abnormal operations

Any of the above conditions can cause an error message to appear on the monitor

screen (page 147). Perform the action indicated by the message that appears.

. Operating Environment

• Operating Temperature Requirements: 5 to 40°C (23 to 104°F)–

• Operating Humidity: 10 to 85% (non condensation)

• Do not place the camera in any of the following locations.

– In an area exposed to direct sunlight, or large amounts of moisture, dust, or sand

– Near heating or cooling devices, or in other areas subjected to extreme changes

in temperature or humidity

– Inside of a motor vehicle on a hot day, or in an area subjected to strong vibration

. Condensation

• Sudden and extreme temperature changes, such as that which occurs when

moving from the outdoors on a cold winter day into a warm room, can cause water

droplets called “condensation” to form on interior and exterior surfaces, creating

the risk of malfunction. To prevent condensation from forming, seal the camera in a

plastic bag before changing locations. Leave the bag sealed to allow the air inside

to naturally change to the same temperature as the air in the new location. After

that, remove the camera from the bag and leave it in the new environment for a few

hours.

• Opening and closing a camera cover in an area while in a warm room or an area

where moisture is high can result in warm or moist air getting into the camera, and

clouding of the lens when shooting. This can be avoided by placing the camera,

with its covers open, along with commercially available silica gel, into a plastic bag

to dry the interior of the camera before shooting.

Precautions During Use

122 Appendix

. Lens

• Never apply too much force when cleaning the surface of the lens. Doing so can

scratch the lens surface and cause malfunction.

• You may sometimes notice some distortion in certain types of images, such as a

slight bend in lines that should be straight. This is due to the characteristics of

lenses, and does not indicate malfunction of the camera.

. Caring for your camera

• Never touch the lens with your fingers. Finger smudges, dirt, and other foreign

matter on the lens can interfere with proper operation of the camera. Use a blower

or other means to keep the lens and flash window free of dirt and dust, and wipe

gently with a soft, dry cloth.

• To clean the camera, wipe it with a soft, dry cloth.

. Closing the camera’s [CARD] cover or [USB] cover

When closing a cover, press down with your thumbs on

the left and right, applying equal force. Pressing down on

either end with one hand only may not close the cover

completely and leave one end out of position.

. Precautions During Wireless Function (Wireless LAN, Bluetooth

Wireless Technology) Use

• Operation of this product may affect or may be affected by nearby devices that use

wireless functionality.

• This product is subject to the Export Administration Regulations (EAR) of the

United States, and so it cannot be exported to or brought into countries that fall

under U.S. Embargoes and Other Special Controls.

Radio transmission interception

The radio waves that are used to send and receive data can be intercepted by third

parties.

Unauthorized access

CASIO COMPUTER CO., LTD. shall be held in no way liable for any unauthorized

access and/or use of the access point equipped on this product if the product is ever

lost or stolen.

Use as a wireless device

Use the wireless function of this product only as specifically described in this manual.

Any other use is unintended use, and CASIO COMPUTER CO., LTD. shall be held in

no way liable for any damages arising out of unintended use.

[CARD] cover or

[USB] cover

123 Appendix

Magnetism, electrostatic charge, and radio interference

Do not use this product near a microwave oven or any other area where magnetism,

electrostatic charge, or radio interference is generated. Radio wave reception may be

poor in certain environments.

Also note that other devices using the same 2.4GHz band used by this product may

cause reduced processing speeds in both devices.

Connection to a public LAN

This product does not support wireless LAN connection over a public wireless LAN

environment.

Intended Areas of Use

This camera is intended for use in countries or areas listed at the website linked

below.

http://world.casio.com/r-law/dc/

Even if you are in a country or area whose name is included in the list at the website

linked above and even if your camera model is the same at the one described in this

manual, your camera may not comply with radio laws and other laws in your area or

country if you purchased a model intended for another country or area on the Internet,

etc. In this case, it is up to you to determine if your camera can be used legally in your

country or area.

Use of this camera in a country or area other than where it was originally purchased

runs the risk of being in violation of local radio laws and other laws. Note that CASIO

COMPUTER CO., LTD. shall not be held in any way liable for any such violations.

. Other Precautions

The camera becomes slightly warm during use. This is normal and does not indicate

malfunction.

. Copyrights

Except for your own personal enjoyment, unauthorized use of snapshots or movies of

images whose rights belong to others, without the permission of the right holder, is

forbidden by copyright laws. In some cases, shooting of public performances, shows,

exhibitions, etc. may be restricted entirely, even if it is for your own personal

enjoyment. Regardless of whether such files are purchased by you or obtained for

free, posting them on a website, a file sharing site, or any other Internet site, or

otherwise distributing them to third parties without the permission of the copyright

holder is strictly prohibited by copyright laws and international treaties. For example,

uploading or distributing on the Internet images of TV programs, live concerts, music

videos, etc. that were photographed or recorded by you may infringe upon the rights

of others. Note that CASIO COMPUTER CO., LTD. shall not be held liable for use of

this product in any way that infringes on the copyrights of others or that violates

The following terms, which are used in this manual, are registered trademarks or

trademarks of their respective owners.

124 Appendix

Note that trademark and registered trademark™® are not used within the text of this

manual.

• microSDXC Logo is a trademark of SD-3C, LLC.

• Windows, Windows Vista, Windows 7, Windows 8.1, and Windows 10 are

registered trademarks or trademarks of Microsoft Corporation in the United States

and other countries.

• Macintosh, Mac OS, QuickTime and iPhone are trademarks of Apple Inc.

• Adobe and Reader are either registered trademarks or trademarks of Adobe

Systems Incorporated in the United States and/or other countries.

• Android and Google Play are trademarks or registered trademarks of Google Inc.

• App Store is a service mark of Apple Inc.

• iOS is a trademark or registered trademark of Cisco Systems, Inc. of the United

States.

• Wi-Fi is a registered trademark of the Wi-Fi Alliance.

• The Bluetooth ® word mark and logos are registered trademarks owned by

Bluetooth SIG, Inc. and any use of such marks by CASIO COMPUTER CO., LTD.

is under license. Other trademarks and trade names are those of their respective

owners.

• This software is based in part on the work of the Independent JPEG Group.

• EXILIM and EXILIM Connect are registered trademarks or trademarks of CASIO

COMPUTER CO., LTD.

• All other company or product names mentioned herein are registered trademarks

or trademarks of their respective companies.

Any and all unauthorized copying, distribution, and transfer for commercial purposes

of the software provided by CASIO for this product are prohibited.

125 Appendix

. Open Source Software

This product includes software that is licensed under the license conditions below.

OpenVG 1.1 Reference Implementation

Permission is hereby granted, free of charge, to any person obtaining a

copy of this software and /or associated documentation files

(the "Materials "), to deal in the Materials without restriction,

including without limitation the rights to use, copy, modify, merge,

publish, distribute, sublicense, and/or sell copies of the Materials,

and to permit persons to whom the Materials are furnished to do so,

subject to the following conditions:

The above copyright notice and this permission notice shall be included

in all copies or substantial portions of the Materials.

THE MATERIALS ARE PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,

EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF

MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.

IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,

DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR

OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE MATERIALS OR

THE USE OR OTHER DEALINGS IN THE MATERIALS.

bluedroid 5.0.0_r2

Licensed under the Apache License, Version 2.0 (the "License");

you may not use this file except in compliance with the License.

You may obtain a copy of the License at

http://www.apache.org/licenses/LICENSE-2.0

Unless required by applicable law or agreed to in writing, software

distributed under the License is distributed on an "AS IS" BASIS,

WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.

See the License for the specific language governing permissions and

limitations under the License.

Apache License

Version 2.0, January 2004

http://www.apache.org/licenses/

TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION

1. Definitions.

"License" shall mean the terms and conditions for use, reproduction,

Specyfikacje produktu

Marka:	Casio
Kategoria:	Aparat cyfrowy
Model:	Exilim EX-FR100L

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Casio Exilim EX-FR100L, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Aparat cyfrowy Casio

Casio exilim ex z650 Instrukcja

4 Lipca 2024

Casio EX-ZR10 Instrukcja

4 Lipca 2024

Casio EX-ZR310 Instrukcja

4 Lipca 2024

Casio EX-Z9 Instrukcja

4 Lipca 2024

Casio EX-ZS50 Instrukcja

4 Lipca 2024

Casio EX-Z37 Instrukcja

4 Lipca 2024

Casio EX-Z700 Instrukcja

4 Lipca 2024

Casio EX-P505 Instrukcja

3 Lipca 2024

Casio EX-Z60DX Instrukcja

3 Lipca 2024

Casio EX-S200 Instrukcja

3 Lipca 2024

Instrukcje Aparat cyfrowy

Najnowsze instrukcje dla Aparat cyfrowy

Minolta Dimage A1 Instrukcja

2 Kwietnia 2025

Minolta Dynax 5D Instrukcja

1 Kwietnia 2025

Brinno ATH2000 Instrukcja

31 Marca 2025

Brinno SHC1000 Instrukcja

11 Marca 2025

Brinno SHC500 Instrukcja

11 Marca 2025

Brinno BAC2000 Instrukcja

4 Marca 2025

Rollei Actioncam SD20 Instrukcja

20 Lutego 2025

Rollei Powerflex 800 Instrukcja

11 Lutego 2025

Canon EOS C300 Mark II PL Instrukcja

19 Stycznia 2025

GoPro Hero 7 White Instrukcja

16 Stycznia 2025