Instrukcja obsługi Casio Edifice EQB-1000D-1AER

Casio Oglądać Edifice EQB-1000D-1AER

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Casio Edifice EQB-1000D-1AER (18 stron) w kategorii Oglądać. Ta instrukcja była pomocna dla 12 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/18
Contents
Before Getting Started...
Watch Face Items
Navigating Between Modes
Mode Overview
Using the Crown
Hand and Day Indicator Movement
Solar Charging
Useful Features
Time Adjustment
Using Watch Operations to Adjust the Time
and Day Settings
MA1907-EA © 2019 CASIO COMPUTER CO., LTD.
Using Mobile Link with a Mobile
Phone
Getting Ready
A
Install the required app on your phone.
B
Configure Bluetooth settings.
C
Pair the watch with a phone.
Auto Time Adjustment
Viewing Stopwatch Data
Setting the Alarm
Configuring World Time Settings
Adjusting Hand and Day Indicator Alignment
Phone Finder
Configuring Watch Settings
Changing the Home City Summer Time Setting
Checking the Watch Charge Level
Connection
Connecting with a Phone
Canceling a Connection with a Phone
Using the Watch in a Medical Facility or
Aircraft
Unpairing
If you purchase another phone
Stopwatch
Measuring Elapsed Time
Flyback Timing (Lap Timing)
Example: Recording a Race Lap Time
Checking the Difference Between the Current
and Previous Lap Times
Other Settings
Configuring Dual Time Settings
Configuring Alarm Settings
Turning Off the Alarm
Resetting Watch Settings
Adjusting Hand and Day Indicator
Alignment
Adjusting Hand and Day Indicator Alignment
Moving to Another Time Zone
Other Information
Summer Time Switching
Supported Phones
Specifications
Mobile Link Precautions
Copyrights and Registered Copyrights
Troubleshooting
Operation Guide 5604
1
Before Getting
Started...
This section provides an overview of the watch
and introduces convenient ways it can be
used.
Note
●The illustrations included in this
operation guide have been created to
facilitate explanation. An illustration
may differ somewhat from the item it
represents.
Watch Face Items
⑥
⑤
② ③
④
⑦
①
AAlarm on/off setting
While you are configuring alarm settings, the
second hand indicates whether the current
alarm is enabled or disabled.
[ON]: Alarm enabled
[OFF]: Alarm disabled
B[R]
When the watch is standing by for connection
with a phone, the second hand points to [R].
Ce
The second hand points to this mark while
there is a connection between the watch and
a phone.
DDay of week
In the Calendar Mode, the function hand
points to the day of the week in the Home City.
ETarget time indicator
In the Stopwatch Mode, the function hand
indicates the difference between the current
and previous lap times.
F[DT]
While Dual Time is in use, the function hand
points to [DT].
G[ALM]
While the alarm time setting is being
configured, the function hand points to [ALM].
Navigating Between Modes
Pressing (A) in the Calendar Mode enters the
Stopwatch Mode and starts an elapsed time
measurement operation.
Holding down (A) for at least two seconds in
the Stopwatch Mode enters the Calendar
Mode.
30
30
A
Calendar Mode
Stopwatch Mode
●Connecting with a Phone
Hold down (B) for at least two seconds until
the second hand points to [R] twice.
●To disconnect, press any button.
B
30
30
Any button
After connectionBefore connection
Mode Overview
●Calendar Mode
The main hour, minute, and second hands
indicate the current time.
The small hour and minute hands show
another time (Dual Time).
30
① ② ③
④ ⑤
ADual Time hour
BDual Time minute
CCurrent location time (24-hour time)
One revolution every 24 hours.
DDual Time hour (24-hour hand)
The hand points to the A-side for a.m. times,
and to the P-side for p.m. times.
EDay of the week at current location
Starting a Stopwatch Elapsed Time
Operation
Press (A).
Connecting with a Paired Phone to Adjust
the Watch’s Time
Hold down (B) for at least 0.5 seconds until the
second hand points to [R].
Searching for a Paired Phone
Hold down (B) for at least four seconds.
Operation Guide 5604
2
●Stopwatch Mode
The second hand, and the small hour and
minute hands indicate the elapsed stopwatch
time.
●The main hour and minute hands indicate
the current time.
30
① ② ③
④ ⑤
Start/Stop
Reset/Flyback
AStopwatch hours
BStopwatch minutes
CStopwatch seconds
DStopwatch hours (24-hour time)
The hand points to the A-side for hours 0
through 11, and to the P-side for hours 12
through 23.
ETarget time indicator
Shows the difference between the current and
previous lap times.
●Alarm
The small hour and minute hands indicate the
alarm time.
The second hand indicates the alarm enabled/
disabled setting.
●The main hour and minute hands indicate
the current time.
30
Enabling/
Disabling the
Alarm
①
②
④
③
AAlarm enabled/disabled
BAlarm minute
CAlarm hour
DAlarm hour (24-hour time)
The hand points to the A-side for a.m. times,
and to the P-side for p.m. times.
Using the Crown
●Fast Forward/Fast Reverse
Second click
First click
Normal timekeeping
Crown
Important!
●To prevent loss of water resistance
and/or damage due to impact, be sure
to push the crown in to its normal
position after you are finished using it.
●When pushing the crown back in, take
care not to apply too much force.
After pulling out the crown to the first or second
click, rotating it quickly in succession in either
direction will start a fast forward or fast reverse
operation. While a fast forward operation is in
progress, quickly rotating the crown in
succession again will increase the speed even
further.
●Stopping Fast Forward/Fast Reverse
Rotate the crown in the direction opposite that
of the ongoing operation or press any button.
Note
●If you do not perform any operation for
about two minutes after pulling out the
crown, crown operations will
automatically become disabled. If that
happens, push the crown back in and
then pull it out again.
Hand and Day Indicator
Movement
30
Function hand
Day indicator
●Function Hand and Day Indicator
Movement
Changing the day setting of the watch will also
cause the function hand to move.
●Day
●It can take anywhere from about 50 seconds
to about 3 minutes and 20 seconds for the
day indicator to change after timekeeping
reaches midnight. At this time, the function
hand moves as the day indicator changes.
●The day may not be indicated correctly
while the watch’s crown is pulled out.
Operation Guide 5604
3

Specyfikacje produktu

Marka: Casio
Kategoria: Oglądać
Model: Edifice EQB-1000D-1AER

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Casio Edifice EQB-1000D-1AER, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Oglądać Casio

Casio

Casio G-Shock GMA-B800 Instrukcja

9 Października 2024
Casio

Casio GW-3000BD-1AER Instrukcja

9 Października 2024
Casio

Casio G-Shock GW-9500 Instrukcja

8 Października 2024
Casio

Casio Edifice ECB 950 Instrukcja

7 Października 2024
Casio

Casio G-Shock GBD-800 Instrukcja

7 Października 2024
Casio

Casio G-Shock GR-B100 Instrukcja

7 Października 2024
Casio

Casio Baby-G MSG-S500 Instrukcja

7 Października 2024
Casio

Casio Baby-G BGA-200-1E2ER Instrukcja

6 Października 2024
Casio

Casio Edifice EFA-112D-1AVEF Instrukcja

6 Października 2024
Casio

Casio G-Shock GST-B600 Instrukcja

5 Października 2024

Instrukcje Oglądać

Najnowsze instrukcje dla Oglądać

Rolex

Rolex Submariner Instrukcja

9 Października 2024
Seiko

Seiko 6N76 Instrukcja

8 Października 2024
Seiko

Seiko 6N53 Instrukcja

8 Października 2024
Seiko

Seiko 6N52 Instrukcja

8 Października 2024
Seiko

Seiko 6G28 Instrukcja

8 Października 2024
Seiko

Seiko 4N30 Instrukcja

8 Października 2024
Seiko

Seiko 4227 Instrukcja

8 Października 2024
Seiko

Seiko 6N32 Instrukcja

8 Października 2024
Seiko

Seiko 6N42 Instrukcja

8 Października 2024
Seiko

Seiko 6N22 Instrukcja

8 Października 2024