Instrukcja obsługi Casio 5302

Casio Oglądać 5302

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Casio 5302 (8 stron) w kategorii Oglądać. Ta instrukcja była pomocna dla 8 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/8

Congratulations upon your selection of this CASIO watch.

Applications

This watch has built-in sensors that measure direction and temperature.

Measurement results are indicated by the watch's hands and displays. These features make this watch

useful when hiking, mountain climbing, or when engaging in other such outdoor activities.

Warning!

• The measurement functions built into this watch are not intended for taking measurements that

require professional or industrial precision. Values produced by this watch should be considered

as reasonable representations only.

•

When engaging in mountain climbing or other activities in which losing your way can create a

dangerous or life-threatening situation, always use a second compass to conﬁ rm direction readings.

• Note that CASIO COMPUTER CO., LTD. assumes no responsibility for any damage or loss

suffered by you or any third party arising through the use of this product or its malfunction.

E E-1

ENGLISH

E-2

About This Manual

• Depending on the model of your watch, display text appears either as

dark ﬁ gures on a light background, or light ﬁ gures on a dark

background. All examples in this manual are shown using dark ﬁ gures

on a light background.

• Button operations are indicated using the letters shown in the

illustration.

• Note that the product illustrations in this manual are intended for

reference only, and so the actual product may appear somewhat

different than depicted by an illustration.

E-3

Things to check before using the watch

1. Check the Home City and the daylight saving time (DST) setting.

Use the procedure under “To conﬁ gure Home City settings” (page E-13) to conﬁ gure your Home City and

daylight saving time settings.

Important!

Proper World Time Mode data depends on correct Home City, time, and date settings in the Timekeeping

Mode. Make sure you conﬁ gure these settings correctly.

2. Set the current time.

See “Conﬁ guring Current Time and Date Settings” (page E-15).

The watch is now ready for use.

E-4

Contents

E-2 About This Manual

E-3 Things to check before using the watch

E-7 Mode Reference Guide

E-12 Timekeeping

E-13 Conﬁ guring Home City Settings

E-13 To conﬁ gure Home City settings

E-14 To change the daylight saving time (summer time) setting

E-15 Conﬁ guring Current Time and Date Settings

E-15 To change the current time and date settings

E-18 Hand Home Position Adjustment

E-18 To adjust home positions

E-20 Using the Digital Compass

E-20 To perform a digital compass operation

E-23 To perform bidirectional calibration

E-25 To perform magnetic declination correction

E-26 To store a direction angle reading in Bearing Memory

E-29 To set a map and ﬁ nd your current location

E-30 To ﬁ nd the bearing to an objective

E-31 To determine the direction angle to an objective on a map and head in that direction

(Bearing Memory)

E-5

E-34 Taking Temperature Readings

E-34 To enter and exit the Thermometer Mode

E-34 To take temperature readings

E-36 To calibrate the temperature sensor

E-37 Specifying Temperature Unit

E-37 To specify the temperature unit

E-38 Checking the Current Time in a Different Time Zone

E-38 To enter the World Time Mode

E-38 To view the time in another time zone

E-39 To specify standard time or daylight saving time (DST) for a city

E-40 To swap your Home Time and World Time Cities

E-41 Using the Stopwatch

E-41 To enter the Stopwatch Mode

E-41 To perform an elapsed time operation

E-41 To pause at a split time

E-42 To measure two ﬁ nishes

E-43 Using the Countdown Timer

E-43 To enter the Countdown Timer Mode

E-43 To specify the countdown start time

E-44 To perform a countdown timer operation

E-44 To stop the alarm

E-6

E-45 Using the Alarm

E-45 To enter the Alarm Mode

E-46 To set an alarm time

E-46 To test the alarm

E-47 To turn an alarm and the Hourly Time Signal on and off

E-47 To stop the alarm

E-48 Illumination

E-48 To illuminate the display manually

E-48 To change the illumination duration

E-50 To enable or disable the auto light switch

E-52 Button Operation Tone

E-52 To enable or disable the button operation tone

E-53 Troubleshooting

E-57 Speciﬁ cations

E-7

Mode Reference Guide

Your watch has 7 “modes”. The mode you should select depends on what you want to do.

To do this: Enter this mode: See:

• View the current date in the Home City

• Conﬁ gure Home City and daylight saving time (DST) settings

• Conﬁ gure time and date settings

Timekeeping Mode E-12

• Determine your current bearing or the direction from your current

location to a destination as a direction indicator and angle value

• Determine your current location using the watch and a map

Digital Compass Mode E-20

Determine the temperature at your current location Thermometer Mode E-34

View the current time in one of 48 cities (31 time zones) around the globe World Time Mode E-38

Use the stopwatch to measure elapsed time Stopwatch Mode E-41

Use the countdown timer Countdown Timer Mode E-43

Set an alarm time Alarm Mode E-45

Operation Guide 5302

E-8

Selecting a Mode

• The illustration below shows which buttons you need to press to navigate between modes.

• To return to the Timekeeping Mode from any other mode, hold down D for about two seconds.

World Time ModeStopwatch Mode

Countdown Timer Mode Alarm Mode

Mode dial hand

World Time ModeStopwatch Mode

Countdown Timer Mode Alarm Mode

Mode dial hand

E-9

• The mode dial hand indicates the watch’s current mode.

Thermometer Mode

Timekeeping Mode

Digital Compass Mode

Mode dial hand

Thermometer Mode

Timekeeping Mode

Digital Compass Mode

Mode dial hand

E-10

General Functions (All Modes)

The functions and operations described in this section can be used in all of the modes.

Direct Timekeeping Mode Access

• To enter the Timekeeping Mode from any other mode, hold down

D for about two seconds.

Auto Return Features

• The watch will automatically return to the Timekeeping Mode if you do not perform any button operation

for a particular amount of time in each mode.

Mode Name Approximate Elapsed Time

Alarm, Digital Compass 3 minutes

Thermometer 1 to 2 minutes

Setting screen (digital setting ﬂ ashing) 3 minutes

Initial Screens

When you enter the Alarm, World Time, or Digital Compass Mode, the data you were viewing when you

last exited the mode appears ﬁ rst.

Scrolling

The E and B buttons are used on the setting screen to scroll through data on the display. In most

cases, holding down these buttons during a scroll operation scrolls through the data at high speed.

E-11

Digital Meters

• The upper digital meter (Digital Meter A) indicates the seconds count in the Timekeeping Mode (page

E-12), World Time Mode (page E-38), and Timer Mode (page E-43). In the Stopwatch Mode (page

E-41) it indicates the 1/10-second count. While viewing bearing memory contents in the Digital

Compass mode (page E-27), it shows a bearing pointer.

• In all modes (except when a ﬂ ashing setting screen is displayed), the lower digital meter (Digital Meter

B) shows the current Timekeeping Mode time (ﬂ ashing) and World Time time (not ﬂ ashing).

Example:

Digital Meter A Digital Meter B

HTWT

WT: Current World Time time (London, 1:08 p.m.)

HT: Current Timekeeping Mode time (Tokyo, 10:08 p.m.)

E-12

Timekeeping

Use the Timekeeping Mode to set and view the current time and date.

• Each press of A in the Timekeeping Mode will change screen contents as shown below.

• Digital Meter A shows the seconds count.

Date Screen Time Screen

Day of week

Seconds

Hour :

Minutes

Month Day

Hour hand

Second hand

Digital Meter A Digital Meter B

Minute hand

Mode dial

hand

indicator

E-13

Conﬁ guring Home City Settings

There are two Home City settings: actually selecting the Home City and selecting either standard time or

daylight saving time (DST).

To conﬁ gure Home City settings

1. In the Timekeeping Mode, hold down A until ADJ appears in the

upper display.

• When you release A (after ADJ appears), SET will be ﬂ ashing in

the lower display. This is the setting mode.

• The watch will exit the setting mode automatically if you do not

perform any operation for about two or three minutes.

2. Use E (East) and B (West) to scroll through the available city codes.

• Keep scrolling until the city code you want to select as your Home

City is shown in the upper display.

• For details about city codes, see the “City Code Table” at the back

of this manual.

3. Press D.

• This will cause DST to appear in the lower screen and the DST

setting of the currently selected Home City to appear in the upper

screen.

Press

to toggle the DST setting between daylight saving time (

ON)

and standard time (OFF).

• Note that you cannot switch between standard time and daylight

saving time (DST) while UTC is selected as your Home City.

City code and city name

DST indicator

City code and city name

DST indicator

E-14

5. After all of the settings are the way you want, press A to exit the setting screen.

• The DST indicator appears to indicate that daylight saving time is turned on.

Note

• After you specify a city code, the watch will use UTC* offsets in the World Time Mode to calculate

the current time for other time zones based on the current time in your Home City.

* Coordinated Universal Time, the world-wide scientiﬁ c standard of timekeeping.

The reference point for UTC is Greenwich, England.

To change the daylight saving time (summer time) setting

1. In the Timekeeping Mode, hold down A until ADJ appears in the

upper display.

• When you release A (after ADJ appears), SET will be ﬂ ashing in

the lower display.

2. Press D.

• This will cause DST to appear in the lower screen and the DST

setting of the currently selected Home City to appear in the upper

screen.

3. Press E to toggle the DST setting between daylight saving time (

ON ) and standard time (OFF).

4. After all of the settings are the way you want, press A to exit the setting screen.

• The DST indicator appears to indicate that daylight saving time is turned on.

E-15

Conﬁ guring Current Time and Date Settings

You can use the procedure below to adjust the Timekeeping Mode time and date settings if they are off.

Changing the digital Home City data should cause the analog time setting to change accordingly. If the

analog time does not indicate the digital time, check the home positions of the hands and make

adjustments if necessary (page E-18).

To change the current time and date settings

1. In the Timekeeping Mode, hold down A until ADJ appears in the

upper display.

• When you release A (after ADJ appears), SET will be ﬂ ashing in

the lower display.

City codeCity code

Operation Guide 5302

E-16

2. Press D to move the ﬂ ashing in the sequence shown below to select the other settings.

City Code DST

Illumination

Duration

Button Operation

Tone On/Off Day Month

12/24-Hour

Format Seconds Hour

Year

Minutes

• The following steps explain how to conﬁ gure timekeeping settings only.

3. When the timekeeping setting you want to change is ﬂ ashing, use E and/or B to change it as

described below.

Screen To do this: Do this:

Change the city code Use

E (East) and B (West).

Toggle between daylight saving time (

ON) and

standard time (

OFF). Press E.

Toggle between 12-hour (

12H) and 24-hour (24H)

timekeeping. Press E.

Reset the seconds to

(If the current seconds count is between 30 and 59,

one is added to the minute count). Press E.

Change the hour or minutes

Use E (+) and B (–).

Change the year, month, or day

E-17

4. After all of the settings are the way you want, press A to exit the setting screen.

Note

• For information about selecting a Home City and conﬁ guring the DST setting, see “Conﬁ guring

Home City Settings” (page E-13).

• While the 12-hour format is selected for timekeeping, a P (PM) indicator will appear for times from

noon to 11:59 p.m. No indicator appears for times from midnight to 11:59 a.m. With 24-hour format,

time is displayed from 0:00 to 23:59, without any P (PM) indicator.

• The watch’s built-in full automatic calendar makes allowances for different month lengths and leap

years. Once you set the date, there should be no reason to change it except after you have the

watch’s battery replaced.

• The day of the week changes automatically when the date changes.

• Refer to the pages shown below for more information on Timekeeping Mode settings.

- Button operation tone on/off: “To enable or disable the button operation tone” (page E-52)

- Illumination duration setting: “To change the illumination duration” (page E-48)

E-18

Hand Home Position Adjustment

Strong magnetism or impact can cause the hands of the watch to be off.

• Home position adjustment is not necessary when the analog time and digital time are the same time in

the Timekeeping Mode.

To adjust home positions

1. In the Timekeeping Mode, hold down

A and keep it depressed for about ﬁ ve

seconds until H.SET appears on the upper display.

• When you release A after H.SET appears, the second hand will move

to 12 o’clock. This indicates the second hand home position adjustment

mode.

• Though ADJ will appear in the upper display about two seconds after you

hold down A, do not release the button yet. Keep it depressed until H.SET

appears.

• Use the D button to select a hand for adjustment. Each press of D

cycles in sequences from the second hand, to the hour and minute hands,

and then the mode dial hand. Selecting a hand causes it to move to 12

o’clock and the content of the lower display changes as shown in the table

below.

Lower display Selected hand

Flashing 00 Second hand

Flashing 0:00 Hour and minute hands

Flashing Sub Mode dial hand

• If the selected hand does not move exactly to 12 o’clock, perform step 2 below to adjust it.

E-19

• The watch will return to regular timekeeping automatically if you do not perform any operation for

about two or three minutes. Any changes you have made to settings up to that point will be saved.

2. Use E (+) and B (–) to adjust the position of the currently selected hand.

• Holding down either button will cause the hand to move at high speed. Once started, high-speed

hand movement will continue even if you release the button. To stop high-speed hand movement,

press any button.

• The second hand and mode dial hand will automatically stop high-speed movement after they

complete one revolution. The minute hand will stop automatically after 12 revolutions.

3. Press A to exit home position correction and return to regular timekeeping.

Note

After performing home position adjustment, enter the Timekeeping Mode and check to make sure that the

analog hands and the lower display indicate the same time. If they do not, perform home position

adjustment again.

E-20

Using the Digital Compass

In the Digital Compass Mode, a built-in bearing sensor detects magnetic north at regular intervals and

indicates one of 16 directions on the upper display.

To perform a digital compass operation

1. Place the watch on a ﬂ at surface. If you are wearing the watch, make

sure that your wrist is horizontal (in relation to the horizon).

2. Point the 12 o’clock position of the watch in the direction you want to

check.

3. In any mode (except a setting mode), press C to perform a digital

compass operation.

• This will cause the mode dial hand to move to COMP.

• COMP will appear in the upper display to indicate that a digital

compass operation is in progress.

• See “Digital Compass Readings” (page E-21) for information

about how direction readings are indicated by the watch.

Note

• If there is an angle value in the upper display, it means that the

bearing memory record (page E-26) is displayed. If this happens,

press E to exit the bearing memory record.

4. To return to the mode you were in immediately before entering the

Digital Compass Mode, press D. To enter the Timekeeping Mode,

hold down D for at least two seconds.

NW 0

WNW

WSW

SSW

SSE

ESE

ENE

NNE

NNW

90180

270

12 o’clock position

North pointer Direction

indicator

Angle value (in degrees)

NW 0

WNW

WSW

SSW

SSE

ESE

ENE

NNE

NNW

90180

270

12 o’clock position

North pointer Direction

indicator

Angle value (in degrees)

E-21

Digital Compass Readings

• When you press

C to start a digital compass operation, COMP will initially appear on the upper

display. About two seconds after you start a digital compass operation, an indicator will appear in the

upper display to indicate what direction the 12 o’clock position of the watch is pointed. The second

hand will point to magnetic north.

• After the ﬁ rst reading is obtained, the watch will continue to take digital compass readings automatically

each second for up to 20 seconds. After that, the digital compass operation will stop automatically.

• The direction indicator and angle value will show

- - - to indicate that the digital compass operation is

complete.

• The auto light switch is disabled during the 20 seconds that digital compass readings are being taken.

• The following table shows the meanings of each of the direction abbreviations that appear on the upper

display.

Direction Meaning Direction Meaning Direction Meaning Direction Meaning

NNorth NNE North-

northeast NE Northeast ENE East-

northeast

EEast ESE East-

southeast SE Southeast SSE South-

southeast

SSouth SSW South-

southwest SW Southwest WSW West-

southwest

WWest WNW West-

northwest NW Northwest NNW North-

northwest

• The margin of error for the angle value and the direction indicator is ±15 degrees while the watch is

horizontal (in relation to the horizon). If the indicated direction is northwest (

NW) and 315 degrees, for

example, the actual direction can be anywhere from 300 to 330 degrees.

E-22

• Note that performing a digital compass operation while the watch is not horizontal (in relation to the

horizon) can result in large error.

• You can calibrate the bearing sensor if you suspect the direction reading is incorrect.

• Any ongoing digital compass operation is paused temporarily while the watch is performing an alert

operation (daily alarm, Hourly Time Signal, countdown timer alarm) or while illumination is turned on (by

pressing B). The digital compass operation resumes for its remaining duration after the operation that

caused it to pause is ﬁ nished.

• See “Digital Compass Precautions” (page E-33) for important information about taking direction readings.

Calibrating the Bearing Sensor

You should calibrate the bearing sensor whenever you feel that the direction readings being produced by

the watch are off. You can use any one of two different bearing sensor calibration methods: bidirectional

calibration or magnetic declination correction.

• Bidirectional Calibration

Bidirectional calibration calibrates the bearing sensor in relation to magnetic north. Use bidirectional

calibration when you want to take readings within an area exposed to magnetic force. This type of

calibration should be used if the watch becomes magnetized for any reason.

Important!

The more correctly you perform bidirectional calibration, the better the accuracy of the readings

produced by the bearing sensor. You should perform bidirectional calibration whenever you change

environments where you use the bearing sensor, and whenever you feel that the bearing sensor is

producing incorrect readings.

E-23

• Magnetic Declination Correction

With magnetic declination correction, you input a magnetic declination angle (difference between

magnetic north and true north), which allows the watch to indicate true north. You can perform this

procedure when the magnetic declination angle is indicated on the map you are using. Note that you can

input the declination angle in whole degree units only, so you may need to round off the value speciﬁ ed

on the map. If your map indicates the declination angle as 7.4°, you should input 7°. In the case of 7.6°

input 8°, for 7.5° you can input 7° or 8°.

Precautions about bidirectional calibration

• You can use any two opposing directions for bidirectional calibration. You must, however, make sure

that they are 180 degrees opposite each other. Remember that if you perform the procedure

incorrectly, you will get wrong bearing sensor readings.

• Do not move the watch while calibration of either direction is in progress.

• You should perform bidirectional calibration in an environment that is the same as that where you plan

to be taking direction readings. If you plan to take direction readings in an open ﬁ eld, for example,

calibrate in an open ﬁ eld.

To perform bidirectional calibration

1. In the Digital Compass Mode, hold down A.

• The second hand will move to 12 o’clock, indicating the

bidirectional calibration mode.

• At this time the upper display will show an upward pointing arrow

( ) and the lower display will show -1-. These indicate that the

watch is ready for calibration of the ﬁ rst direction.

Operation Guide 5302

Specyfikacje produktu

Marka:	Casio
Kategoria:	Oglądać
Model:	5302

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Casio 5302, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Oglądać Casio

Casio G-Shock GMA-B800 Instrukcja

9 Października 2024

Casio GW-3000BD-1AER Instrukcja

9 Października 2024

Casio G-Shock GW-9500 Instrukcja

8 Października 2024

Casio Edifice ECB 950 Instrukcja

7 Października 2024

Casio G-Shock GBD-800 Instrukcja

7 Października 2024

Casio G-Shock GR-B100 Instrukcja

7 Października 2024

Casio Baby-G MSG-S500 Instrukcja

7 Października 2024

Casio Baby-G BGA-200-1E2ER Instrukcja

6 Października 2024

Casio Edifice EFA-112D-1AVEF Instrukcja

6 Października 2024

Casio G-Shock GST-B600 Instrukcja

5 Października 2024

Instrukcje Oglądać

Najnowsze instrukcje dla Oglądać

Rolex Submariner Instrukcja

9 Października 2024

Seiko 6N76 Instrukcja

8 Października 2024

Seiko 6N53 Instrukcja

8 Października 2024

Seiko 6N52 Instrukcja

8 Października 2024

Seiko 6G28 Instrukcja

8 Października 2024

Seiko 4N30 Instrukcja

8 Października 2024

Seiko 4227 Instrukcja

8 Października 2024

Seiko 6N32 Instrukcja

8 Października 2024

Seiko 6N42 Instrukcja

8 Października 2024

Seiko 6N22 Instrukcja

8 Października 2024