Instrukcja obsługi Casio 5266 - CPW-500H

Casio Oglądać 5266 - CPW-500H

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Casio 5266 - CPW-500H (10 stron) w kategorii Oglądać. Ta instrukcja była pomocna dla 8 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/10

Operation Guide 5266

E-1

ENGLISH

Congratulations upon your selection of this CASIO watch.

Warning !

•

The measurement functions built into this watch are not intended for taking measurements

that require professional or industrial precision. Values produced by this watch should be

considered as reasonable representations only.

• Note that CASIO COMPUTER CO., LTD. assumes no responsibility for any damage or loss

suffered by you or any third party arising through the use of this product or its malfunction.

•

To ensure correct direction readings by this watch, be sure to perform bidirectional

calibration before using it. The watch may produce incorrect direction readings if you do not

perform bidirectional calibration. For more information, see “To perform bidirectional

calibration” (page E-24).

•

Keep the watch away from audio speakers, magnetic necklace, cell phone, and other

devices that generate strong magnetism. Exposure to strong magnetism can magnetize the

watch and cause incorrect direction readings. If incorrect readings continue even after you

perform bidirectional calibration, it could mean that your watch has been magnetized. If this

happens, contact your original retailer or an authorized CASIO Service Center.

E-2

About This Manual

• Depending on the model of your watch, digital display text appears

either as dark ﬁ gures on a light background, or light ﬁ gures on a

dark background. All sample displays in this manual are shown

using dark ﬁ gures on a light background.

• Button operations are indicated using the letters shown in the

illustration.

• Note that the product illustrations in this manual are intended for

reference only, and so the actual product may appear somewhat

different than depicted by an illustration.

E-3

Things to check before using the watch

1. Check the Home City and the daylight saving time (DST) setting.

Use the procedure under “To conﬁ gure Home City settings” (page E-12) to conﬁ gure your Home

City and daylight saving time settings.

Important!

Proper Hijri calendar, Prayer Time Mode, and Moon Age Mode data depend on correct Home

City, time, and date settings in the Timekeeping Mode. Make sure you conﬁ gure these settings

correctly.

2. Conﬁ gure latitude and longitude settings for your current location.

See “To select a Home City by conﬁ guring latitude and longitude settings” (page E-14).

3. Set the current time.

See “Conﬁ guring Current Time and Date Settings” (page E-15).

The watch is now ready for use.

E-4

Contents

E-2 About This Manual

E-3 Things to check before using the watch

E-7 Mode Reference Guide

E-11 Timekeeping

E-12 Conﬁ guring Home City Settings

E-12 To conﬁ gure Home City settings

E-13 To change the Daylight Saving Time (summer time) setting

E-14 Conﬁ gure latitude and longitude settings for your current location

E-14 To select a Home City by conﬁ guring latitude and longitude settings

E-15 Conﬁ guring Current Time and Date Settings

E-15 To change the current time and date settings

E-17 To specify a Hijri date offset

E-19 Hand Home Position Adjustment

E-19 To adjust home positions

E-20 Determining the Direction to Qibla

E-20 To determine Qibla

E-22 To take a direction reading

E-24 To perform bidirectional calibration

E-26 To perform magnetic declination correction

E-5

E-28 Viewing Prayer Names and Prayer Times

E-29 To display today’s prayer times

E-30 To view prayer times on a speciﬁ c date

E-31 To turn a prayer alarm on or off

E-32 To stop a sounding prayer alarm

E-33 To select a prayer time calculation method (FAJR, ISHA)

E-36 Using Moon Data

E-36 To look up the Moon age on a speciﬁ c date

E-37 Thermometer

E-37 To enter and exit the Thermometer Mode

E-38 To correct the temperature value

E-40 Specifying Temperature Unit

E-40 To specify the temperature unit

E-41 Using the Alarm

E-41 To enter the Alarm Mode

E-42 To set an alarm time

E-42 To test the alarm

E-43 To turn an alarm and the Hourly Time Signal on and off

E-43 To stop the alarm

E-44 Using the Stopwatch

E-44 To enter the Stopwatch Mode

E-44 To perform an elapsed time operation

E-44 To pause at a split time

Operation Guide 5266

E-6

E-45 Using the Countdown Timer

E-45 To enter the Countdown Timer Mode

E-45 To specify the countdown start time

E-46 To perform a countdown timer operation

E-46 To stop the alarm

E-47 Illumination

E-47 To turn on illumination

E-47 To change the illumination duration

E-49 Button Operation Tone

E-49 To turn the button operation tone on and off

E-50 Troubleshooting

E-53 Speciﬁ cations

E-7

Mode Reference Guide

Your watch has 9 “modes”. The mode you should select depends on what you want to do.

To do this: Enter this mode: See:

• View the current time and date in the Home City

• Conﬁ gure Home City and daylight saving time (DST) settings

• Conﬁ gure current location latitude and longitude settings

• Conﬁ gure time and date settings

• Specify the Hijri calendar offset

Timekeeping Mode E-11

• View the Qibla

• Take direction readings and display one of 16 direction

indicators and the angle relative to magnetic north

Qibla Mode E-20

View today’s prayer name and prayer times Today’s Salat Time Screen E-28

View the prayer name and prayer times for a speciﬁ ed date SALAT Time Search Mode E-28

Determine a Moon age value Moon Age Mode E-36

Determine the temperature at your current location Thermometer Mode E-37

Set an alarm time Alarm Mode E-41

Use the stopwatch to measure elapsed time Stopwatch Mode E-44

Use the countdown timer

Countdown Timer Mode

E-45

E-8

Selecting a Mode

• The illustration below shows which buttons you need to press to navigate between modes.

• To return to the Timekeeping Mode from any other mode, hold down C for about two seconds.

• In any mode, press L to illuminate the display.

Moon Age Mode

Thermometer Mode

Stopwatch ModeAlarm Mode

E-9

SALAT Time Search Mode Timekeeping Mode Qibla Mode

Today’s Salat

Time Screen

Countdown Timer Mode

• You also can take digital compass readings in the Qibla Mode (page E-22).

E-10

General Functions (All Modes)

The functions and operations described in this section can be used in all of the modes.

Auto Return Features

• If you do not perform any button operation for two or three minutes in the Salat Search Mode,

Moon Age Mode, or Alarm Mode, the watch will automatically return to the Timekeeping Mode.

• If you do not perform any button operation for one or two minutes in the Thermometer Mode or

Qibla Mode, the watch will automatically return to the Timekeeping Mode.

• If you leave a screen with ﬂ ashing digits on the digital display for two or three minutes without

performing any operation, the watch exits the setting screen automatically.

Initial Screens

When you enter the Alarm Mode, the data you were viewing when you last exited the mode

appears ﬁ rst.

Scrolling

The B and D buttons are used on the setting screen to scroll through data on the digital display.

In most cases, holding down these buttons during a scroll operation scrolls through the data at high

speed.

E-11

Timekeeping

Use the Timekeeping Mode to set and view the current time and date.

• Each press of A in the Timekeeping Mode cycles the digital display between the current

Gregorian calendar date, the current Hijri calendar date, and the current time.

• The HIJRI indicator on the digital display indicates that the Hijri calendar date is displayed.

Day of week

Day Month Day Month

Hour : Minutes

Seconds

Date screen (Gregorian) Date screen (Hijri) Regular timekeeping

screen

HIJRI indicator

Operation Guide 5266

E-12

Conﬁ guring Home City Settings

There are two methods you can use to conﬁ gure Home City settings: selecting a Home City and

then selecting standard time or daylight saving time (DST), or selecting CUSTOM and then

specifying an UTC offset.

To conﬁ gure Home City settings

1. In the Timekeeping Mode, hold down A for at least two seconds

until ADJUST appears on the digital display. This is the setting

mode. Release A after ADJUST appears.

• The city name of the currently selected Home City data will

appear on the digital display with an arrow (

▲

) ﬂ ashing to the

left.

• The watch will exit the setting mode automatically if you do not

perform any operation for about two or three minutes.

• For details about city data, see the “City Data Table” at the back

of this manual.

2. Press D (East) and B (West) to scroll through city names until the one you want to use as your

Home City data is displayed.

• If you selected CUSTOM in place of a Home City, press C here to display the UTC offset

setting screen. Use D (+) and B (–) change the UTC differential value in 15-minute

increments. When you select CUSTOM, the standard time/daylight saving time selection

screen does not appear. Jump to step 5 of this procedure.

3. Press C to display the DST setting screen.

4. Press D to toggle between Daylight Saving Time (DST ON) and Standard Time (DST OFF).

• Note that you cannot switch between standard time and daylight saving time (DST) while

CUSTOM is selected as your Home City.

City Name

E-13

5. When the setting is the way you want, press A twice to return to the

Timekeeping Mode.

• The DST indicator appears to indicate that Daylight Saving Time

is turned on.

Note

• After you specify city data, the watch will use UTC* offsets to

calculate the current time for other time zones based on the

current time in your Home City.

* Coordinated Universal Time, the world-wide scientiﬁ c standard

of timekeeping.

The reference point for UTC is Greenwich, England.

To change the Daylight Saving Time (summer time) setting

1. In the Timekeeping Mode, hold down A for at least two seconds

until ADJUST appears on the digital display. Release A after

ADJUST appears.

• The name of the city currently selected as your Home City will

appear on the digital display with an arrow (

▲

) ﬂ ashing to the

left.

2. Press C to display the DST setting screen.

3. Press D to toggle between Daylight Saving Time (DST ON) and

Standard Time (DST OFF).

4. When the setting is the way you want, press A twice to return to the

Timekeeping Mode.

• The DST indicator appears to indicate that Daylight Saving Time

is turned on.

• Note that you cannot switch between standard time and daylight

saving time (DST) while CUSTOM is selected as your Home

City.

Setting

DST indicator

Setting

DST indicator

E-14

Conﬁ gure latitude and longitude settings for your current location

You can ensure correct display of Qibla, prayer times, and moon ages by conﬁ guring latitude and

longitude settings for your current location.

To select a Home City by conﬁ guring latitude and longitude settings

1. In the Timekeeping Mode, hold down A for at least two seconds

until ADJUST appears on the digital display. This is the setting

mode. Release A after ADJUST appears.

• Your current Home City data will appear on the digital display

with an arrow (

▲

) ﬂ ashing to the left.

2. Press A to display to the latitude setting screen with the current

latitude setting ﬂ ashing.

3. Use D (+) and B (–) to change the ﬂ ashing value in 0.1° increments.

• Holding down D or B while the latitude or longitude setting screen is displayed will scroll

the value to the left of the decimal point (the value to the right does not change) at high

speed.

S 62.0° S 61.9° S 0.1° N 0° N 0.1° N 61.9° N 62.0°

4. When the latitude is the value you want, press C to display the longitude setting screen with the

current longitude setting ﬂ ashing.

5. Use D (+) and B (–) to change the ﬂ ashing value in 0.1° increments.

W 179.9° W 179.8° W 0.1° E 0° E 0.1° E 179.9° E 180°

6. When the settings are the way you want, press A to return to the Timekeeping Mode.

E-15

Conﬁ guring Current Time and Date Settings

You can use the procedure below to adjust the current time and date settings if they are off.

Changing the digital Home City data should cause the analog time setting to change accordingly. If

the analog time does not indicate the digital time, check the home positions of the hands and make

adjustments if necessary (page E-19).

This watch displays Hijri calendar months and days. The watch normally calculates and displays

Hijri calendar dates automatically. If necessary, you can correct the displayed data by ±3 days.

To change the current time and date settings

1. In the Timekeeping Mode, hold down A for at least two seconds

until ADJUST appears on the digital display. This is the setting

mode. Release A after ADJUST appears.

•

The name of the city currently selected as your Home City will

appear on the digital display with an arrow (

▲

) ﬂ ashing to the left.

2. Use D and B to select the city data you want.

• Select your Home City data before changing any other setting.

• For full information on city data, see the “City Data Table” at the

back of this manual.

Press C to move the ﬂ ashing in the sequence shown below to select the other settings.

Date Display Format Illumination Duration Button Operation Tone On/Off Day

DST 12/24-Hour Format Seconds Hour Minute Year Month

UTC Offset/GMT Differential

City data

CUSTOM

• The following steps explain how to conﬁ gure timekeeping settings only.

City name

E-16

4. When the timekeeping setting you want to change is ﬂ ashing, use B and/or D to change it as

described below.

Screen To do this: Do this:

Change the city name Use D (East) and B

(West).

Toggle between Daylight Saving Time (DST ON) and

Standard Time (DST OFF). Press D.

Toggle between 12-hour (12H) and 24-hour (24H)

timekeeping. Press D.

Reset the seconds to 00 Press D.

Change the hour or minute

Use D (+) and B (–).

Change the year, month, or day

Select the date display format (DMY, YMD, MDY) Press D.

5. When the settings are the way you want, press A twice to return to the Timekeeping Mode.

Note

• For information about selecting a Home City and conﬁ guring the DST setting, see “Conﬁ guring

Home City Settings” (page E-12).

• The watch’s built-in full automatic calendar makes allowances for different month lengths and

leap years. Once you set the date, there should be no reason to change it except after you have

the watch’s battery replaced.

• Changing your Home City setting will cause all of the following settings to become initialized:

latitude and longitude (to the location of the Home City), the prayer calculation method (Fajr,

Isha, Asr), and the Qibla declination (in accordance with the selected Home City). Note that

these settings are not initialized when CUSTOM is selected for the Home City setting.

E-17

To specify a Hijri date offset

1. In the Timekeeping Mode, hold down A for at least four seconds

until HIJRI SET appears on the digital display. This is the setting

mode. Release A after HIJRI SET appears.

• Releasing A will cause the current Hijri date offset to ﬂ ash on the

digital display.

2. Use D (+) and B (–) to change the offset within a range of ±3

days.

3. When the setting is the way you want, press A.

• This will display the corrected Hijri date.

Note

• The Hijri offset setting is temporary. At the end of each month, the watch automatically corrects

the Hijri date and returns the Hijri offset to ±0DAY.

• Note that the Hijri offset also returns to ±0DAY whenever you change the watch’s Gregorian

date setting or the latitude and/or longitude settings.

• Changing the watch’s Gregorian date setting can cause an error in the displayed Hijri until the

watch performs automatic Hijri date correction at the end of the month (on the 29th or 30th day

of the month). If the Hijri date display is wrong, adjust it by changing the Hijri date offset.

Hijri Calendar Precautions

Hijri dates displayed by this calculator are the results of calculations. Actual Hijri dates may be

determined by religious authorities based on observations of a New Moon following sundown. This

can result in dates calculated by the watch being different from actual Hijri dates.

HIJRI indicator

Specyfikacje produktu

Marka:	Casio
Kategoria:	Oglądać
Model:	5266 - CPW-500H

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Casio 5266 - CPW-500H, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Oglądać Casio

Casio G-Shock GMA-B800 Instrukcja

9 Października 2024

Casio GW-3000BD-1AER Instrukcja

9 Października 2024

Casio G-Shock GW-9500 Instrukcja

8 Października 2024

Casio Edifice ECB 950 Instrukcja

7 Października 2024

Casio G-Shock GBD-800 Instrukcja

7 Października 2024

Casio G-Shock GR-B100 Instrukcja

7 Października 2024

Casio Baby-G MSG-S500 Instrukcja

7 Października 2024

Casio Baby-G BGA-200-1E2ER Instrukcja

6 Października 2024

Casio Edifice EFA-112D-1AVEF Instrukcja

6 Października 2024

Casio G-Shock GST-B600 Instrukcja

5 Października 2024

Instrukcje Oglądać

Najnowsze instrukcje dla Oglądać

Rolex Submariner Instrukcja

9 Października 2024

Seiko 6N76 Instrukcja

8 Października 2024

Seiko 6N53 Instrukcja

8 Października 2024

Seiko 6N52 Instrukcja

8 Października 2024

Seiko 6G28 Instrukcja

8 Października 2024

Seiko 4N30 Instrukcja

8 Października 2024

Seiko 4227 Instrukcja

8 Października 2024

Seiko 6N32 Instrukcja

8 Października 2024

Seiko 6N42 Instrukcja

8 Października 2024

Seiko 6N22 Instrukcja

8 Października 2024